Products in Primers & Lacquers: Dispersant

Efka® FA 4600 is an anti-settling agent for non-aqueous coatings, preventing sedimentation and agglomeration of even heavy pigments. is in a colorless to yellowish/reddish liquid form, Efka® FA 4600 is easily applicable and contributes to maintaining the stability of coatings.

AFCONA 5244 is the nearly 100% active solid version of AFCONA 5044, designed for high-solid systems where the presence of solvents must be limited. When used at the same level of active solids, the properties of AFCONA 5244 and AFCONA 5044 are almost identical.

AFCONA 5209 is an anionic/cationic wetting and dispersing additive used to improve the wetting of pigment surfaces. AFCONA 5209 is the 100% version of AFCONA 5009. It reduces the interfacial tension between pigments or extenders and the vehicle. It stabilizes the pigments through electrical charge repulsion forces.

AFCONA 5009 is an anionic/cationic wetting and dispersing additive that improves the wetting of pigment surfaces, reducing the interfacial tension between pigments or extenders and the vehicle. It is an economy grade of additive and stabilizes the pigments through electrical charge repulsion forces.

AFCONA 5008 is an anionic/cationic wetting and dispersing additive that improves the wetting of pigment surfaces and organically treated bentonites. It reduces the interfacial tension between pigments or extenders and the vehicle, and also stabilizes the pigments through charge repulsion forces.

AFCONA 5054 is a wetting and dispersing additive to prevent sedimentation and flooding of pigments. It helps to reduce interfacial tension between hydrophilic pigments/extenders and the binder, forming a lattice structure with the pigments at the same time. It stabilizes pigment through electrical charge repulsion forces.

AFCONA 5044 is an anionic/cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites. AFCONA 5044 is an additive for pigment dispersion. It reduces the interfacial tension between the vehicle and pigments or extenders. It stabilizes the pigments through electrical charge repulsion forces.

Afcona - 5054 is a wetting and dispersing additive formulated to prevent sedimentation and flooding of pigments.

SYNTRAN® DR 7060 is based on our polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based coatings. Depending on the application and the objective, SYNTRAN® DR 7060 is typically used in concentrations between 1% and 10%. Features and Benefits: Polymeric surfactant technology designed to provide excellent wetting and incorporation of pigments or additives into water-based coatings. High compatibility and stability in multiple formulation types Low-foam technology High acid number APEO-free

SYNTRAN® DR 7011 is based on our polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based pigment concentrates and coatings. Used as a grinding resin in pigment dispersions, it improves color development of organic pigments and carbon black. Depending on the application and the objective, SYNTRAN® DR 7011 is typically used in concentrations between 10% and 30%. Features and Benefits: Excellent wetting and dispersibility of pigments Highly water sensitive High compatibility and stability in multiple formulation types Zero VOC requirements to formulate coating. Polymeric surfactant technology designed to improve wetting and incorporation of pigments or additives into water-based pigment concentrates and coatings. It improves color development of organic pigments and carbon black.

DISPARLON® KS-873N is a surface control agent based on anionic surfactant which prevents flocculations, anti-flood, and anti-float in solventborne systems.

SYNTRAN® DR 7061 is based on our polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based pigment concentrates and coatings. Used as a grinding resin in pigment dispersions, it improves color development of organic pigments and carbon black. Depending on the application and the objective, SYNTRAN® DR 7061 is typically used in concentrations between 10% and 30%. Features and Benefits: Excellent wetting and dispersibility of additives High compatibility and stability in multiple formulation types Low-foam technology High acid number APEO-free

SYNTRAN® DR 7101 is a water-based alkali-solubilised styrene-acrylic copolymer based on our polymeric surfactant technology. This polymer was designed to improve dispersibility and color development of water- based pigment concentrates and coatings and can be used for both inorganic and organic pigment dispersions. Used as a grinding resin, it shows excellent rheology control and storage stability with multiple pigment types. Depending on the application and the objective, SYNTRAN® DR 7101 is typically used in concentrations between 10% and 30%. Features and Benefits: Excellent pigment dispersing ability High compatibility and stability with multiple formulation types and pigments APEO-free Low odor Compliant with Swiss Ordinance

SYNTRAN® DR 7102 is based on our polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based coatings. Depending on the application and the objective, SYNTRAN® DR 7102 is typically used in concentrations between 1% and 10%. Features and Benefits: Polymeric surfactant technology designed to provide excellent wetting and incorporation of pigments or additives into water-based coatings Good compatibility with a wide range of surfactants APEO-free

Anionic/cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated Bentonites A 100% active solid version of AFCONA – 5044

ADD-5765 is a wetting and dispersing additive for enhancing the dispersion of inorganic pigments and stabilizing the suspension of special effect pigments in solvent-based media. It is designed to prevent flooding and floating and hard sedimentation. ADD-5765 can be used in coatings and printing inks.

Deuteron ND 953 helps to prevent the uncontrollable increase in viscosity which can arise in presence of certain pigments and fillers in heavily-filled aqueous systems. The required rheological properties of the paint or coating material can be obtained just through the character of the used binder or by addition of a suitable thickener.The presence of Deuteron ND 953 improves the storage stability. Unwelcome thickening during storage will be avoided or limited.Deuteron ND 953 is used in aqueous paints and coating materials, e.g. masonry paints, fillers, aqueous primers, water-based bituminous emulsions. The product is also suitable for use in water-based pigment preparations. It is most effective in presence of inorganic pigments and fillers. back

Kemfluid 210 is a paraffinic compound, used in extrusion of PVC, rubber and other primary products. It helps pigment dispersion particularly with rubber.

Kemfluid 224 is a polyethylene wax, used in rigid PVC extrusion. Gives good shine. Non-transparent rigid polymers.

Kemfluid 216 is a paraffinic compound, used externallty but has good compatibility with PVC resins. Shiny finishes without exudation. Soft PVC lubricant for cable coverings.

Kemfluid 206 is a polyethylene wax, used in extrusion of rigid or soft PVC. Giving rigid shiny surfaces.

LUBA-print® 103/A-neu is a wax dispersion / wachsdispersion product.Wood lacquer applications. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

ANTI-TERRA-203 is Controlled flocculating wetting and dispersing additive for solvent-borne medium-polar to low-polar thick layer systems and primers to prevent fillers and inorganic pigments from settling and to gel bentonites.

ADD-5065 is a wetting and dispersing additive for enhancing the dispersion of inorganic pigments and stabilizing the suspension of special effect pigments in solvent-based media. It is designed to prevent flooding and floating and hard sedimentation. ADD-5065 can be used in coatings and printing inks.

LUBA-print® 499 is a wax dispersion / wachsdispersion product. This product have applications in aqueous lacquer systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Kemfluid 220-L is a fatty amide, used an anti-static and pigment dispersion agent. Hardening agent for paints, lacquers, asphalts, etc. In PVC used for calendering or blown film extrusion. Lubricant for ABS, polystyrene, acrylnitrile styrene, polystyrene and polypropilene pigment dispersion agent.

Deuterol 201 E is a defoaming dispersing agent for fillers and pigments in water soluble and water miscible primers and lacquers. The wetting effect of Deuterol 201 E in primers and one-coat lacquers, which are applied to badly degreased metal substrates, considerably improves the adhesion of the coating film to the metal substrate. The product also shows a defoaming effect in the manufacture as well in the processing of water dilutable systems. back

ADD-5054 is an electro-neutral wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated Bentonites and to reduce the time required for the grinding process. ADD-5054 is suitable for architectural paints. It creates thixotropy and therefore prevents flooding, floating and settling of the pigments and reduces sagging.

ANTI-TERRA-202 is Controlled flocculating wetting and dispersing additive for solvent-borne medium-polar to low-polar thick layer systems and primers to prevent fillers and inorganic pigments from settling and to gel bentonites. The additive is only available on the North American market.

Kemfluid 201 is a polyethylene wax, used in extrusion of rigid or soft PVC. External lubricant with low amount of filler. Gives good surface shine.

Kemfluid 220-G is a fatty amide, used as an anti-static and pigment dispersion agent. Hardening agent for paints, lacquers, asphalts, etc. In PVC used for calendering or blown film extrusion. Lubricant for ABS, polystyrene, acrylnitrile styrene, polystyrene and polypropilene pigment dispersion agent.

ANTI-TERRA-205 Controlled flocculating wetting and dispersing additive for solvent-borne medium-polar to non-polar thick layer systems and primers to prevent fillers and inorganic pigments from settling and to gel bentonites.

ADD-5066 is a wetting and dispersing additive for enhancing the dispersion of inorganic pigments. It is designed to prevent flooding and floating and hard sedimentation.

Indofil Industries Indofil 850 compact is an extremely versatile pigment dispersant for acrylic, vinyl acrylic and styrene/acrylic based coatings. A cost effective and versatile dispersant Sodium Salt of carboxylic acid having superior dispersion capacity, enhances opacity, color strength of paint.

LUBA-print® 501/XB is a wax dispersion / wachsdispersion product.Industrial lacquer applications. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

LUCRAMUL® AP is a phosphonic acid ester based polymeric dispersing agent for inorganic pigments, including titanium dioxide.