Products in Primers & Lacquers: Plasticizer

POLYCHEM® G801-238-X-66 is a glyptal short oil non-drying alkyd. It has excellent compatibility and adequate hardness. It also has very high color retention and good flexibility. It is specifically designed for baking enamels and serves as an effective plasticizer for nitrocellulose lacquers.

POLYCHEM 7610-OX-50 is an short coconut alkyd solution for use as a baking vehicle in combination with aminoplast resins or as a plasticizer for lacquers.

Kimteks' Phthalate-free DOTP plasticizer has high plasticizing effect. It is generally used with materials like P. V. C in order to plasticise, after being heated to a doughy or plasticised state, to obtain elasticity, brightness for plastic material, generate electrical resistance, to prevent cracking and make surface smooth.

Santicizer® 160 is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer has compatibility in many polymer types, particularly in PVC. Santicizer® 160 can be used as a primary plasticizer or is often blended with general purpose plasticizers to offer faster fusion and better plasticizing efficiency. Together, these properties generate savings in faster production throughput, lower oven temperatures, and lower total plasticizer loadings. Santicizer® 160 is a well-recognized plasticizer utilized in many industrial PVC applications, processes like cleaning/purging, and as a carrier for biocides, pigments, and other additives.

POLYCHEM® 4773-BA-70 is a short oil coconut alkyd with very low color (200 APHA color). It can be formulated for use in a low VOC baking vehicle in combination with aminoplast resins or as a plasticizer for nitrocellulose lacquers. It has excellent durability and gloss retention compared to conventional resin.

Hercolyn D resin, a methyl ester of hydrogenated rosin, is a light amber liquid resinous tackifier and plasticizer. Being hydrogenated, it has marked resistance to aging.

Girnar Industries Blown Castor Oil is a honey-golden vicious liquid derived after oxidative polymerization and due to this fact, it is also known as oxidized castor oil or polymerized castor oil. It is prepared by blowing air or oxygen into castor oil at various temperatures of 80-1300C.

DRT Abalyn methyl ester of wood rosin is an amber-colored, near neutral, tacky, viscous liquid.

STYSOLAC AW is a unique non-migrating, nonvolatile, non-hydroscopic resin plasticizer for use in both solvent and water base ink and coatings applications. An effective plasticizer for (water-based) alkalized polyner resinates and more polar resin dispersions, as well as for the more alcohol soluble type resin solutions.

Soyanol™ 1000E is water-based additive for paints or stains, highly compatible with many chemistries, including most latex, acrylic and urethane emulsion systems, it helps develop high stability emulsions, increases open times, improves freeze / thaw performance over industry leading coalescents, also does double duty as coalescent and plasticizer, it is efficient and cost effective solution which has typical usage 2%-7%.

Winlex 4025 is a low softening point rosin ester with good stability and mild odor. It is easily emulsified in water by conventional means. The principal uses for this resin are in the formulation of oil varnish, lacquer, hot-melt, heat-sealing, and pressure-sensitive adhesives. It has a suitable FDA status for use in food packaging applications covered by 175.105.

Kanatol 900 (DINP) is almost colorless and odorless oily liquid, free of foreign materials which is slightly soluble in water ( 0.285mg/L at 24C ) but soluble in alcohols, hexane etc. It is miscible and compatible with all the monomeric plasticizers of PVC compounding.

Kanatol 400 (N) (DnBP) is almost colorless, odorless or slight aromatic, ester odor oily liquid, free of foreign materials. Plasticization of vinyl resins and other kinds of polymers in production of cable flexible PVC, artificial leather, rubber products, polymeric building materials, linoleum, film and sheet /plate materials, packing films, PVC gaskets etc.

Kanatol 1001 (DIDP) is a clear, colorless, and odorless liquid, free of foreign materials. It is soluble in most organic solvent and in soluble in water. Around 95% of DIDP is used in PVC as a plasticizer. More than half of the remaining 5% is used in the production of polymers other than PVC (e.g. rubbers). The remaining DIDP used in non-polymer application including anticorrosion paints, anti-fouling paints, lacquers, inks, adhesives and sealants.

OLVEX 3 is a modified vegetable oil

Velsiflex® 342 is one of the most popular liquid plasticizers. It is a high-solvating plasticizer containing mostly dipropylene glycol dibenzoate. It is used in a wide variety of applications, including caulk, adhesives, resilient flooring, PVC-coated fabrics and artificial-leather cloth. In PVC, it acts as a medium- viscosity high solvator that saves energy and improves process ability. Vinyl applications using Velsiflex 342 have excellent resistance to extraction from solvents and oils. It also works with vinyl to make it UV – light-degradation resistant and stain resistant.

BECKOSOL® 1351 is a long castor alkyd plasticizer containing no solvents.

TACKIFIER 70 is an APEO free acrylic emulsion. Tg = -45°C (approx).

ADDAPT PolySurF HPH is a solvent-free UV-curable additive. It can also act as a polymerisable hydrophilic non-ionic surfactant and/or co-polymerisable plasticizer. It is a proprietary mixture of Acrylated mono- and di-Phosphate ester; the mono-Phosphate ester being O-(EO)n>10-CH3 modified; where the reactive Acrylate group is Methacrylate

ADDAPT PolySurF HPL is a solvent-free UV-curable additive. It can also act as a polymerisable lipophilic non-ionic surfactant and/or polymerisable plasticizer. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester: the mono-Phosphate ester being O-C12-C14 modified; where the reactive Acrylate group is Methacrylate.

C-1031 is a Short Oil glycerol esterified Alkyd Resin, modified with saturated fatty acid.