Products in Primers & Lacquers: Silicates

Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasting a silica content ranging from 32.5 to 33.5% (as SiO2 ). This silica content arises from a blend of TEOS-derived silica and other components. This formulation is tailored for use in two-component inorganic zinc-rich primers. The product brings forth enhanced toughness and exceptional performance in high-temperature scenarios. The heightened toughness results directly from the increased silica content in contrast to an ethyl polysilicate binder.

Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasts a silica content ranging from 32.7% to 34.0% (as SiO2). Formulated for two-component inorganic zinc-rich primers, this material brings about improved toughness and exceptional performance in high-temperature applications. The elevated SiO2 content directly contributes to its enhanced toughness.

SILESTER® XAR is a ready-to-use, prehydrolyzed ethyl silicate hybrid binder. The solvent used in SILESTER® XAR is a blend of ethanol and 2-propanol. This product is conveniently prepared and can be directly utilized in the production of ceramic slips, ramming mixes, and anticorrosion paints without any further processing steps.

Crys-Talc® 4H-4HC is a high-purity, high-brightness, platy, medium-sized talc used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Crys-Talc® 4H is used in solid-color and semitransparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics. Crys-Talc® 4H has a platy, hydrophobic structure used in  architectural and industrial primers to improve barrier properties which impart corrosion resistance and stain blocking  ability.

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

Silverline 403 is an off-white, high-purity, platy, fine talc. It enhances film strength and flexibility, provides barrier properties in architectural and industrial primers, and improves corrosion resistance and stain-blocking ability. Silverline 403 is used in paints to improve low-shear viscosity and maximize prime pigment extension.

Mistron® 403 is a high-purity, platy, microcrystalline talc. In architectural and industrial primers, it provides barrier properties to improve corrosion resistance and stain-blocking ability. Mistron® 403 also prevents tannin bleed and improves gloss uniformity in solid-color and semi-transparent stains. In sealant formulations, Mistron® 403 enhances film strength and flexibility.

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

Nicron® 504 is a high-purity microcrystalline talc. The platy nature of Nicron® 504 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 504 is also used in paints to improve sag resistance and maximize prime pigment extension.

Mistron® 353 is a high-purity microcrystalline talc. Mistron® 353 is used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Mistron® 353 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Nicron® 353 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 353 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. Nicron® 353 is also used for rheology and film reinforcement in adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applications.

Nicron® 303 is a high-purity microcrystalline talc with more than 98% talc content. The lamellar nature of Nicron 303 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability.

Mistron® 554 is an off-white, high-purity, platy-fine talc. Its platy nature improves barrier properties, corrosion resistance, and stain blocking ability in architectural and industrial primers. Mistron® 554 is also used in topcoats to reduce hard settling, improve sag resistance, and extend prime pigments.

Nicron® 403 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 403 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 403 is also used in paints to improve sag resistance and maximize prime pigment extension. Nicron® 403 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Nicron® 674 is an ultra-fine, high-purity microcrystalline talc. It is insoluble in mineral acids, hydrophobic, and non-abrasive to compounding and processing equipment. Nicron® 674 is used in a wide variety of applications, including interior/exterior coatings, color concentrates, adhesives, sealants, and thermoplastic polymers.

Mistron® 604 is a high-purity microcrystalline talc with more than 98% talc content. The lamellar nature of Mistron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability.

Nicron® 554 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 554 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 554 is also used in paints to improve sag resistance and maximize prime pigment extension.

Nicron® 002 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 002 enhances film strength and flexibility in sealant formulations and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 002 is used in topcoats, block fillers, traffic paints, texture paints, and composite compounds.

Silverline 303 is a high-purity microcrystalline talc product. Silverline 303 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. This product can be used as a cost-effective reinforcing agent or a dusting/parting agent.

Nicron® 604 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 604 is also used in paints to improve sag resistance and maximize prime pigment extension.

Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crack resistance, and reinforcement properties in water-based systems.

ExBar® 200 is manufactured from a buff-colored barium sulfate ore. Strict quality control results in consistent products that are used in friction materials, primers, acoustical compounds, rubber compounds, adhesives, sealants and many other applications.

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 – 7 % total formula weight.

Novakup® L-337 is a surface modified or silane treated lamellar quartz. This is 100% passing 44 microns. 1250 Novakup® is preferred for its’ added mechanical strength and barrier protection within chemical and corrosion resistant applications. Novakup® is the only silane treated, lamellar quartz offered within the industry.

Wayncor™ 226 - Corrosion Inhibitive Pigment is a premium multi-component corrosion inhibitor pigment that comprises distinctly different inhibitive species to provide a high degree of corrosion protection on ferrous substrates. Although versatile it is highly recommended for water based acrylic primers where a high degree of corrosion resistance is required. Typical use level is between 3 – 7% total formula weight.

ADDAPT SILSTAB L 100 is a solvent free, Potassium Silicate solution for aqueous systems such as Renders (Putz), Interior and Exterior primers and Textured Masonry Coatings. It is a stabilized Potassium Silicate solution in water.

BRIOMICA® 212 is a dry-ground ultra-white mica powder.

SILLITIN Z 89 similar to Sillitin Z 86 but has a higher color requirements.

Wayncor™ 214 - Calcium Borosilicate is an effective corrosion inhibitive pigment designed for alkyds and other solvent based systems. Typical use level is 3 – 7% total formula weight.

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

DISPERCEL NC 6029/Op (Alluminosilicate)is applied in flexographic and rotogravure inks for paper, aluminum and different types of plastic films. Wood lacquers and coatings, cosmetic application (i.e. nail lacquers, etc.)

HALTEX® 302 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

HALTEX® 315 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

ADDAPT SILSTAB L 50 is a solvent free, Potassium Silicate solution for aqueous systems such as Plasters (Putz) and Coatings It is a stabilized Potassium Silicate solution.

Stainban™ 208 - Calcium Strontium Zinc Phosphosilicate is a white, non-refractive pigment especially designed to inhibit the migration of the tannin stains in coatings on a wide variety of woods. The small particle size and narrow particle distribution allows the pigment to be easily incorporated into the coating using high speed dispersion. It is compatible with a wide variety of solvent and water based resins. It is recommended for use in primers or in self-priming applications where stain inhibition is needed. Typical use levels range from 5 – 9% total formula weight.

BRIOMICA® 262 is a dry-ground ultra-white small mica flakes.