Products in Primers & Lacquers: 2K (2 component) Coating

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNOL® H 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It is primarily employed as a binder in surface coating compounds and printing inks. VINNOL® H 15/45 M functions as a thermoplastic, physically drying binder that undergoes film formation as the solvent within the formulation evaporates.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

WACKER® Silicate TES 28 is a monomeric ethyl silicate, also known as tetraethoxysilane or tetraethyl orthosilicate. It is a colorless, low-viscosity liquid with an SiO2 content of approximately 28 wt.%. This product is commonly used in the formulation of anti-corrosive coatings, marine and protective coatings, as well as industrial coatings.

VINNOL® E 15/40 A is a hydroxyl-containing copolymer comprising approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. Its primary application lies in serving as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNOL® E 22/48 A is a copolymer composed of approximately 75 wt.% vinyl chloride (VC) and 25 wt.% carbon acid esters with hydroxyl functionality. It serves as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® E 22/48 A undergoes film formation as the solvent within the formulation evaporates.

VINNOL® E 15/48 A is a hydroxyl-containing copolymer composed of approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. It serves as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNAPAS® 550 ED is a multi-purpose construction dispersion, specifically suited for cement admixtures, the formulation of two-component cementitious waterproofing membranes, as well as the production of primers. The dispersion is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® ED, which means that it enhances the adhesion and flexibility of mortars.

Pangel B40 is a powdered additive with a high thickening and anti-settling capacity for high-polarity systems. It is especially recommended for adding thixotropic, suspension, and sagging resistance properties to systems based on alcohol, glycol, and ketone solvents, as well as mixtures of those solvents with water.

Pangel B42 is an organically modified sepiolite powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol and ketone type solvents, as well as in mixtures of those with water.

SYNTHALAT A 065 is an acrylic resin cross-linked with polyisocyanate. Primarily used in combination with aliphatic polyisocyanates for air- and stove-drying coatings for metals, woods, and plastics. These types of 2 components are preferably used in fields where high coating qualities are required but where stoving is impossible due to the size or heat-sensitivity of the object to be coated. Its applications lie in numerous fields, like furniture, marine transportation, wood flooring, industrial maintenance, and marine coatings.

SYNTHALAT A 045 is an acrylic resin cross-linked with polyisocyanate. It is primarily used in combination with aliphatic polyisocyanates for air- and stove-drying coatings for metals and plastics. These types of 2-components should be used in areas where high coating qualities are required. It has applications in primers and lacquers, industrial coatings, and metal coatings.

SYNTHOESTER 215 HS is a hydroxyl group containing, high solid polyester resin. It is recommended to use it in combination with melamine resins and CAB for base coat enamels. It is also used with aliphatic polyisocyanates for air- and oven-drying 2-pack high-solid laquers and fillers with high mechanical properties, high gloss and body, and very good chemical and weather resistance. It has applications in primers and lacquers, marine transportation, wood flooring, industrial maintenance, marine coatings, and automotive OEM coatings.

SYNTHALAT A 085 is an acrylic resin cross-linked with polyisocyanate. It is used in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings. It offers good mechanical properties and resistance to chemicals. It has applications in automotive OEM coatings, primers and lacquers, and also in marine transportation.

SYNTHALAT A 200 is an acrylic/epoxide resion cross-linked with polyisocyanate. It is used in combination with aliphatic polyisocyanates for air-drying and oven-drying two-component primers with excellent filling properties, quick drying, and good adhesion to steel, aluminum, and zinc, which gives good results in condensed moisture tests and salt spray tests. Wherever there is a requirement for maximum corrosion resistance and adhesion, this type of 2-component primer is used. It has applications in industrial maintenance, primers and lacquers, and metal coatings.

Lo-Vel® 2010 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 2050 is a strong defoamer for most solvent-based coatings. AFCONA 2050 offers very strong defoaming and anti-foam performance with good compatibility in many resin systems. It is suitable for solvent-based coatings, printing inks and thermosetting resin systems. The product eliminates foam and blistering, regardless of whether the air bubbles are caused by the substrate.

AFCONA 2020 is a very strong defoamer suitable for most solvent-based coatings, printing inks, and thermosetting resin systems. It eliminates foam and blistering, regardless of the source of the air bubbles. However, it is not suitable for transparent, high-gloss clear topcoats.

Lo-Vel® 275 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

AFCONA 2038 is a highly compatible defoamer that does not cause in-can haziness. It prevents the formation of foam and blisters during the manufacturing and application of solvent-based wood finishes. This defoamer has excellent compatibility properties, making it especially suitable for use in clear coatings and high gloss coatings. Additionally, it is suitable for use in applications where dry film transparency is essential, such as when applying thick clear coatings by conventional spraying.

AFCONA 2040 is a moderate defoamer with minimal side effects that prevents the formation of foam and blisters during manufacturing and application. It offers a combination of good defoaming and compatibility with most resin systems. It is recommended for medium-viscosity applications applied by spray and brush, and is particularly suitable for systems ranging from low polarity to high polarity. AFCONA 2035 is recommended for brush and conventional spray applications.

AFCONA 3758 is a leveling and flow control agent for solvent-based coatings with anti-crater properties. AFCONA 3758 is a special modified polyacrylic polymer. It reduces drastically surface tension of organic coating systems. This, together with good compatibility in most solvent-based systems and with minimal foam stabilizing effect, makes it very effective as an anti-crater and flow control agent for all solvent-based coatings.

LO-VEL® 8100 flatting agent is a high-efficiency flatting agent that is ideal for use in a variety of coating systems. It is a synthetic amorphous silicon dioxide, wax-treated silica designed for use where a Hegman value of 6 to 6.75 is required. Moreover, its high flatting efficiency, resistance to settling and heat-age stability provide formulation flexibility and expanded process capability.

AFCONA 2045 is a silicone-based defoamer used to prevent the formation of foam and blisters during manufacturing and application of solvent-based coatings, including polyurethane clear coats. It is effective even in difficult situations such as airless spray, brush, and roller application, and has strong defoaming properties with a very good transparent appearance.

AFCONA 2290 provides anti-foam and de-aeration properties for solvent-containing and solvent-free systems of epoxy, polyurethane, UPE and UV coatings. AFCONA 2290 contains a non-silicone defoaming substance which offers very good performance in both defoaming and anti-foaming. Due to its strong defoaming properties and silicone-free composition, it is also very suitable for primer coatings.

Lo-Vel® 2023 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Lo-Vel® 66 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

ASCONIUM® 142DA can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 112 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 140 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 110 replaces or enhances the effectiveness of mineral anticorrosive pigments in aqueous and solventborne metal coatings. It is a hydrophobic agent that enhances the water resistance of dry films. For substrates made of galvanized steel, this product functions as an anti flash-rust additive. It is used as a corrosion inhibitor to protect metal packaging.

ASCONIUM® 130 is a liquid additive that improves the anti-corrosion and hydrophobic properties of both waterborne and solventborne metal coatings and enhances their adhesion to metal substrates. This product can be used alone or in combination with other anti-corrosion agents.

ASCONIUM® 114 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 143 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 111 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.