Products in Primers & Lacquers: Epoxy Coating

AFCONA 2290 provides anti-foam and de-aeration properties for solvent-containing and solvent-free systems of epoxy, polyurethane, UPE and UV coatings. AFCONA 2290 contains a non-silicone defoaming substance which offers very good performance in both defoaming and anti-foaming. Due to its strong defoaming properties and silicone-free composition, it is also very suitable for primer coatings.

Pangel W is an organically modified sepiolite in powder form used to improve the anti-sagging properties of aqueous systems as well as its anti-sedimentation performance during storage. This thickener is manufactured through organic modification of rheological sepiolite, mainly for aqueous systems. It improves rheological characteristics in the range of shear forces affecting sagging and sedimentation properties while controlling consistency.

ECOTINT® HC ORANGE A2-O colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC OXIDE RED B3-RO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC GREEN B5-G are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BIVA YELLOW C2-YO colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC MAGENTA A4-P colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC WHITE B6-WO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC RED A3-R colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BLACK B7-SO are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BLUE B4-B are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC COBALT BLUE C1-BO are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC VIOLET A5-V colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC YELLOW A1-Y colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC YELLOW B1-Y colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC SCARLET A2-R colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC OXIDE GREEN A6-GO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC OXIDE YELLOW B2-YO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel holdout, and crack resistance.

KaMin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin®90B is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important.

Coarsest kaolin with the lowest oil absorption, for excellent extension without frosting in water-based coatings. Spray dried bead form.

Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crack resistance, and reinforcement properties in water-based systems.

TA-816 is a reactive siloxane polymer blend designed to produce a rough or textured appearance to paints and coatings containing, but not limited to non-leafing aluminum. Systems include: lacquers, alkyd, epoxy, melamine phenolic, polyester and urethane.

raybo 85 Rustib is a cationic wetting agent. Because of its polarity, it is attracted to the metal surface forming a mono-molecular hydrophobic layer. This affinity increases adhesion and resistance to corrosion undercutting in coatings containing RAYBO 85. When added to coatings pigmented with transition metals containing pigments like phthalocyanine blue, insure that the surfactant demand has been met. If it has not, RAYBO 85 will be absorbed onto the pigment, reducing corrosion protection.

Hunan Three-Ring Pigments Iron oxide red H120 color is soft, and the color is excessive from the orange red to the purple red series. Tricyclic pigments have excellent pigment and chemical properties, high coloring power and hiding power, excellent light and weather resistance, and high temperature resistance. Insoluble in alkali, stable in a certain range of acidity, completely soluble in concentrated hydrochloric acid. It is insoluble in water and organic solvents and has excellent properties such as rust and UV resistance.

Nigtas 3 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

ExBar® 200 is manufactured from a buff-colored barium sulfate ore. Strict quality control results in consistent products that are used in friction materials, primers, acoustical compounds, rubber compounds, adhesives, sealants and many other applications.

Sunnyside corporation LACQUER THINNER 457 is a fast evaporating, extremely flammable organic solvent mixture. It is designed for thinning lacquer and epoxy coatings, and is also recommended for clean up of spray guns and other application equipment.

AMA is dimethyl silicone designed to improve mar resistance and reduce surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane.

Hunan Three-Ring Pigments Iron oxide red H110 color is soft, and the color is excessive from the orange red to the purple red series. Tricyclic pigments have excellent pigment and chemical properties, high coloring power and hiding power, excellent light and weather resistance, and high temperature resistance. Insoluble in alkali, stable in a certain range of acidity, completely soluble in concentrated hydrochloric acid. It is insoluble in water and organic solvents and has excellent properties such as rust and UV resistance.

Onto™ EP1132 is a range of functional surface treatments that can be used to promote adhesion of two-part polyurethane and epoxy coatings to difficult-tobond substrates such as engineering polymers, high performance (speciality) plastics and thermoplastic composites. The treatment can be applied to a substrate from solution using a range of coating methods to form a functional layer of material that is strongly bonded to the substrate surface. The new surface functionality is chemically compatible for bonding to polyurethane and epoxy coatings and the treatment has been shown to prevent delamination even under severe weathering conditions.

Shandong Huijin Chemical 650 polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

IMI Fabi CHD6 is used as High solids - Marine & protective Primers - Renders.

Pigmentan PIGMENTAN EMX is a low cost, high performance, environmentally friendly, direct (1:1) substitute for basic Zinc Phosphate. It is suitable for use in primers for both ferrous and non-ferrous metals. Pigmentan MX is non toxic and contains no Zinc, Chrome, or other heavy metals, and does not require hazardous labeling.

Nigtas 20 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Road Marking Paints, Epoxy Paints.

JSC SUMYKHIMPROM Titanium Dioxide Sumtitan R-2041 is characterized by improved dispersibility, high optic characteristics and increased atmospheric resistance. Is recommended to be applied in high quality organo-soluble and water-dispersed paints, primers, linoleum, white cement, sealants, adhesives, beddings, putties, silicate paints, finishing mortars (incl. cement mortars), powder coatings, epoxy coatings, road marking paints, high-solid paints, printing inks, floor coatings.