Products in Primers & Lacquers: Waterborne Ink

Joncryl® HSL 9010 is a liquid product with end uses in waterborne ink and lacquers. Recognized for its high performance, it finds applications in the markets of paints and coatings, printing, and packaging. With its liquid physical form, it serves as a coating for primers and lacquers.

Joncryl® HSL 9012, a high-performance member of the Acrylics & Acrylates chemical family, takes the spotlight within CASE Ingredients. Specifically categorized under Resins & Binders in the realm of Other Resins & Binders, this liquid formulation is designed for a range of applications. With a particular focus on printing and packaging, Joncryl® HSL 9012 proves ideal for packaging coatings, primers, and lacquers. In its liquid form, this product ensures ease of use and efficiency in diverse formulations. Trust in the reliability and high performance of Joncryl® HSL 9012 to elevate the quality of your packaging coatings and lacquers.

Syntran® DR 7055 is an alkali-soluble acrylic polymer that is based on Interpolymer Corporation's polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based inks, pigment concentrates, and coatings. This product is used for wood coatings, concrete coatings, architectural coatings, etc.

Syntran® DR 7015 is an alkali-soluble acrylic polymer that is based on Interpolymer Corporation's polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based inks and coatings. This product is used for wood coatings, concrete coatings, architectural coatings, etc.

SYNTRAN® DR 7060 is based on our polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based coatings. Depending on the application and the objective, SYNTRAN® DR 7060 is typically used in concentrations between 1% and 10%. Features and Benefits: Polymeric surfactant technology designed to provide excellent wetting and incorporation of pigments or additives into water-based coatings. High compatibility and stability in multiple formulation types Low-foam technology High acid number APEO-free

CeraSPERSE 321BG is a compound of waxes and PTFE in Butyl Carbitol (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides improved compatibility with both polar and non-polar systems. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

SYNPRINT AC 4120 is a water-based, cationic acrylic copolymer solution. SYNPRINT AC 4120 is recommended for primers with excellent adhesion on paper/paperboards and labels. Moreover, films formulated with SYNPRINT AC 4120 work as a receptive layer for water-based anionic inks. Features and Benefits: Excellent adhesion to a wide variety of substrates Excellent bonding of anionic inks Free of APEO and co-solvents

FluoroSLIP® 731 MG is a combination of a high melting synthetic wax, carnauba wax, and polytetrafluoroethylene (PTFE) where the wax blend shows a melting peaks ranging from 84 – 110°C.

SYNPRINT AC 4110 is a water-based, cationic acrylic copolymer solution. SYNPRINT AC 4110 is recommended for primers with excellent adhesion on critical substrates such as metallised foil. Moreover, films formulated with SYNPRINT AC 4110 form a receptive layer for water-based anionic inks. The low minimum film-forming temperature allows the formulation of low-VOC formulations. Features and Benefits: Excellent adhesion to a wide variety of substrates Excellent bonding of anionic inks Low MFFT Excellent, universal stain-blocking properties Free of APEO and co-solvents

Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel holdout, and crack resistance.

SYNPRINT AC 9113 is based on self-crosslinking technology substantially increasing the chemical resistance as well as adhesion. This technology was designed for the self-crosslinking mechanism to fully cure at room temperature while maintaining long-term shelf stability. SYNPRINT AC 9113 provides excellent adhesion to multiple substrates including films and foils and is an excellent let down binder for water-based printing inks. It has a very low particle size with good penetration into porous substrates like paper and board. It exhibits the following features and benefits: Film has very high gloss, flexibility with good printability Excellent adhesion to multiple substrates Zero VOC requirements to formulate coating

KaMin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin® 90 is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important.

SYNTRAN® WA 1001 is a hard and high melting polyethylene wax emulsion. This wax emulsion is specially designed for OPV, ink and coating applications. It can improve the friction resistance and anti-blocking properties of the surface. SYNTRAN® WA 1001 can be combined with various water-based polymer dispersions. Features and Benefits: Excellent abrasion resistance Excellent anti-blocking properties Very good compatibility with waterborne base polymers Very good water resistance Hard and high melting polyethylene wax emulsion. Abrasion and scratch resistance, anti-blocking. It can improve the friction resistance and anti-blocking properties of the surface

SYNTRAN® DR 7061 is based on our polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based pigment concentrates and coatings. Used as a grinding resin in pigment dispersions, it improves color development of organic pigments and carbon black. Depending on the application and the objective, SYNTRAN® DR 7061 is typically used in concentrations between 10% and 30%. Features and Benefits: Excellent wetting and dispersibility of additives High compatibility and stability in multiple formulation types Low-foam technology High acid number APEO-free

KaMin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin®90B is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important.

SYNTRAN® DR 7101 is a water-based alkali-solubilised styrene-acrylic copolymer based on our polymeric surfactant technology. This polymer was designed to improve dispersibility and color development of water- based pigment concentrates and coatings and can be used for both inorganic and organic pigment dispersions. Used as a grinding resin, it shows excellent rheology control and storage stability with multiple pigment types. Depending on the application and the objective, SYNTRAN® DR 7101 is typically used in concentrations between 10% and 30%. Features and Benefits: Excellent pigment dispersing ability High compatibility and stability with multiple formulation types and pigments APEO-free Low odor Compliant with Swiss Ordinance

SYNTRAN® WA 1005 is a multi-purpose synthetic wax emulsion. It is an ethylene copolymer emulsion of a hard and high melting polyethylene wax specifically designed for use in surface coating applications of different kinds. SYNTRAN® WA 1005 has excellent compatibility and is therefore very well suited for clear wood coatings to improve slip, scratch, abrasion and blocking resistance. Features and Benefits: Very good compatibility with waterborne polymers Excellent abrasion resistance High slip and anti-blocking Very good water resistance. Hard and high melting polyethylene wax emulsion.

Beijing Panxin Titanium CR506 is used for coating and rutile TiO2 produced by chloride process and specially treated has excellent optical properties and lowerion content. So it is suitable to be used in electrophoretic paints and general interior coatings.

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effectiveness.Application Water-based clear lacquers and top coats where the presence of PTFE can be accepted, e.g. air drying and stoving enamels, aqueous acrylic lacquers and inks. back

Multihue Pigment Green FGNX is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

LUBA-print® CA 30 is a wax dispersion / wachsdispersion product.Waterbased lacquer applications. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Multihue Pigment Blue CBR is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

Fibrillated cellulose in water suspension. Valida S231C, 3% is derived from wood pulp that has been sourced from sustainably managed forests. The product is a multifunctional bio-based additive which can be widely used in waterborne coatings, Inks, adhesives to provide unique rheological and physical properties.

The presence of Deuteron VT 819 prevents the settling of pigments/extenders and the separation of the liquid phases during the storage in aqueous systems such as emulsion paints and plasters. The applicability of the paints will be improved. Deuteron VT 819 is compatible with most binders and thickeners which are customary in the paint industry.Deuteron VT 819 is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. The product has no tendency to form lumps. Solutions can be produced with a simple stirrer. The use of a high shear rate is not necessary. The product‘s easy solubility is only given when it is incorporated into systems with a pH-value ranging between neutral and alkaline.When the solution is prepared, its pH-value can be adjusted towards an acidic pH-value.Application Aqueous primers, emulsions paints, adhesives, dispersion plasters, printing inks, silicate paints, aqueous preparations of pigments and fillers. back

STYSOLAC AW is a unique non-migrating, nonvolatile, non-hydroscopic resin plasticizer for use in both solvent and water base ink and coatings applications. An effective plasticizer for (water-based) alkalized polyner resinates and more polar resin dispersions, as well as for the more alcohol soluble type resin solutions.

Multihue Pigment Yellow G is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

Beijing Panxin Titanium CR200 used for coating and rutile TiO2 produced by chloride process and specially treated has excellent optical properties and lowerion content. So it is suitable to be used in electrophoretic paints and general interior coatings.

Deuteron VT 910 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 910 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

LUBA-print® 499 is a wax dispersion / wachsdispersion product. This product have applications in aqueous lacquer systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Multihue Pigment Violet RC is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities.Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back

Beijing Panxin Titanium CR210 is used for coating and rutile TiO2 produced by chloride process and specially treated has excellent optical properties and lowerion content. So it is suitable to be used in electrophoretic paints and general interior coatings.

Beijing Panxin Titanium CR501 is used for coating and rutile TiO2 produced by chloride process and specially treated has excellent optical properties and lowerion content. So it is suitable to be used in electrophoretic paints and general interior coatings.

Multihue Pigment Yellow HR is used in Air Drying Enamel Paints, Stoving Enamel Paints, N. C. Lacquer Paints, Emulsion Paints, Offset Letterpress Inks, Polymide Based Liquid inks, NC Based Liquid Inks, Aqueous Liquid Inks, Rubber, Leather, Linoleum, PVC Leather Cloth, Cement Paints, lime Colors, Carbon Papers and Textile Printing.

Beijing Panxin Titanium CR510 is used for coating and rutile TiO2 produced by chloride process and specially treated has excellent optical properties and lowerion content. So it is suitable to be used in electrophoretic paints and general interior coatings.