Products in Baby Diapers: Nonwovens

Braskem CP250H polypropylene homopolymer (HPP) offers narrow MWD and low smoke and condensate. Applications and sugested users include spunbond nonwovens, high-speed fiber spinning continuous filament yarns and stable fiber.

Biosafe® HM4001 is a silicon-based antimicrobial available as a 0.75% aqueous solution. It is specifically formulated for use in water-based surface treatments and coatings. This product effectively acts as an antimicrobial agent and is registered with the EPA under the number 83019-2

EverGlide® MB2450 is a Thermoplastic polyurethane polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1350 is a Polycarbonates polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB950 is a High Impact Polystyrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Polyfill Technologies Yellow Masterbatch Loaded Stabilized Masterbatch based on LLDPE. It contains Blends of Antioxidants and Lubricants Aids dispersed in the Polymer Matrix to give excellent performance in environmental condition. It is One Pack System which when mixed with polymer meets the desired properties.

RG 1101 R is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles

RG 3200 MC is a Polypropylene Random Copolymer Without Film Processing Additives and Good Weld Strength. It is used in Stationary Films, Hygienic Applications, Food Packaging, Laminating Films

Addiflam® PP50 can be applied by padding, various coating systems (instable, crushed stable foam, paste, kiss roll, lamination) either supplied as a ready-to-use compound or as an additive (powder, dispersions, emulsions, slurries) for self-compounding purposes. Cost effective tailor made solutions are available upon end use, manufacturing options and level of durability required.

RG 1191 N is a Polypropylene Homopolymer With High Efficient antiGasfading Stabilization. It is used in Staple Fibers (Fine Denier), Hygienic NonWoven Fabrics (NWF)

Polyfill Technologies Black Masterbatch is based on LDPE. It contains Blends of Antioxidants and UV Stabilizer Aids dispersed in the Polymer Matrix to give excellent performance in environmental condition. It is One Pack System which when mixed with polymer meets the desired properties.

DiamondPET Flakes provide a consistent high total purity value of less than 100 ppm. It is developed from used PET Bottles which look and shine just like diamonds.

EVATHENE® UE508 is an ethylene-vinyl acetate copolymer resin (EVA) for use in powder coating and hot melt adhesion of non-woven fabric.

RG 1101 XS is a Polypropylene Homopolymer With antiGasfading Stabilization and Inherent UV Stability. It is used in POY/DTY, CF, Laminating

KURARAY POVAL™ 28-99 by Kuraray is polyvinyl alcohol. It is a fully saponified, odorless, water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It shows varying degree of polymerization and hydrolysis. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. It exhibits good penetration capacity and good adhesion properties. It offers high cohesion, toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. KURARAY POVAL™ 28-99 is designed for pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Nylene Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications Excellent melt stability and good melt strength Excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die

RG 1101 XR is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles

RG 1191 XN is a Polypropylene Homopolymer With High Efficient antiGasfading Stabilization. It is used in Staple Fibers (Fine Denier), Hygienic NonWoven Fabrics (NWF)