Products in Printing & Packaging: Radiation Curable Adhesive

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

Omnicat 320 is a colorless liquid photoinitiator of mixed triarylsulfonium hexafluoroantimonate salts in propylene carbonate. Omnicat 320 has been designed for the cationic curing of inks and coatings based on epoxy, oxetane, and vinyl ether formulations. Omnicat 320 exhibits high cure-speed, low odor, and excellent post cure.

Omnicat 445 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

Omnicat 432 is a mixture of triarylsulfonium hexafluorophosphate salts and propylene carbonate, for cationic curing of epoxy, oxetane, and vinyl ether formulations.

The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents.Deuteron UV 1242 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly silicones and epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1242. back

MPD Industries UVP 0202 99 is a Di functional monomers, which polymerize when expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer. It is a fast curing monomer with low valatility & a hydrophobic backbone.

MPD Industries UVP 0815 99 is difunctional low viscosity acrylated polyester oligomer. It has good pigment wetting properties. It exhibits excellent water balance and good color for development in offset printing application. It is recommended for plastic substrates especially PVC polystyrene and polyolefins.

Komo Chemical KH85SL resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

MPD Industries UVP 0225 99 is a aliphatic urethane diacrylate oligomer. Films of UVP 0225 cured by ultraviolet light exhibit good flexibility light color and good adhesion to various substrates. It has excellent resistence to polar solvent and has good chemical resistence.

Komo Chemical KF454S resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

Komo Chemical 384T resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

MPD Industries UVP 0600 99 is a difunctional Bisphenol A epoxy acrylate. This product is characterized by its light color and high reactivity.It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.

MPD Industries UVP 0203 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a high boiling monomer with low vapor pressure.It is compatible with a wide range of acrylated resins.

Omnicat 440 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

Omnirad 369 is a highly efficient UV-curing agent used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional monomers.

bossin® W-33 has excellent properties in curing, fast, heat resistance, low shrinkage and low irritation.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

MPD Industries UVP 0610 99 is a di functional Bisphenol A epoxy acrylate oligomer gel. This product is characterized by its light color and high reactivity. It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.