Products in Printing & Packaging: Waterborne Adhesive

V-TAC™ 9001 dispersion is an aqueous, 55% solids, solvent-free anionic rosin based dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, natural rubber and polychloroprene. V-TAC™ 9001 enhances adhesion as well as superior heat resistance. V-TAC™ 9001 is recommended as a tackifier for pressure sensitive and contact-bond adhesives.

COLOR PASTE WA YELLOW 42 is an APEO free water based dispersion of organic pigments. Total pigment concentration: about 37%.

COLOR PASTE WA ORANGE 7 is an APEO free water dispersion of organic pigments. Total pigment concentration: 42 %.

West Tech Chemical Ltd AT 840 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

AGITAN 271 is a special composition with excellent stability and high efficiency. AGITAN 271 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

COLOR PASTE WA WHITE 4 is an APEO free water dispersion of titanium dioxide. Total pigment concentration: 56 %.

Aquadhes® 6102 is a a water-based rosin ester dispersion and solvent free.

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

In aqueous systems, such as emulsion paints and plasters, the use of Deuteron XG prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is compatible with most binders and thickeners which are customary in the paint industry.Deuteron XG is insoluble in most organic liquids. The product is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. Pre-wetting of Deuteron XG with glycols at a ratio of 1 : 1 accelerates the swelling- and dissolution process. Aqueous solutions of Deuteron XG show a high pseudoplasticity. High rate of shear lowers the viscosity. Reducing the shear rate increases viscosity again. Solutions of Deuteron XG are stable regarding the pH-value and temperature. There is almost no change in stability from pH 2 – 12. The temperature hardly has any influence on the viscosity of a preparation with Deuteron XG.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Aromatic thermoplastic polyurethane resin in dry granules.

GlucoStar® 1748N is a cold-water soluble, high viscosity polymer for use in industrial applications. This polymer is a modified, high molecular weight, natural polysaccharide designed to impart enhanced functional properties including: viscosity, rheology modification, solution stability, salt tolerance, surface activity and water retention. The ultra-high viscosity and high solubility of GlucoStar 1748N make it particularly suited for use as a viscosifier and binder in adhesive formulations. In addition, it has excellent tack and film clarity. GlucoStar 1748N is particularly suited for use in wallcovering, outdoor advertising and paper bag adhesives. GlucoStar 1748N is not treated with a preservative

AGITAN 350 is a special composition with excellent stability and high efficiency. AGITAN 350 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

EDAPLAN LA 451 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 451 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

Dalian Bio-Chem CMIT/MIT -1.5F is suitable for wet corrosion of the aqueous products, can be used to protect the paint, polymer emulsions, adhesives, enamels, fillers, sealants and other water based products against harmful microbiological contamination, it can also be used diluted metal cutting fluid additive.