Products in Printing & Packaging: Hydrocarbons

Megawide Petrochemicals C9 Hydrocarbon Resin is polymer of nine-carbon aromatic monomers. It has good compatibility with numerous polymers and good solubility with various solvents.

Indofil Industries Indofoam CXZ is an oil-soluble defoamer for all coating systems based on synthetic latex systems such as in paper coating, in synthetic latex emulsion for paints and adhesives. INDOFOAM CXZ helps in reduction and prevention of foam formation and in effect gives considerable savings in production time and cost. It isextremely versatile defoamer with good compatibility in aqueous media. A Blend of Hydrocarbons with non-ionic emulsifiers – APEO FREE.

Petroleum Resin C9 ES 110 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Petroleum Resin C9 ES 140 it is aromatic hydrocarbon resin, light yellow to darker brown flakes, with good transparency and luster, good solubility, compatibility, aqueous stability, insulation and chemical stability, and with good adhesiveness and heat conductivity. C9 petroleum resin can manufacture transportation paint, due to its good thermal stability and weatherability, and can be applied to paper compound and plastics due to its non-saturability.

Yi Mei New Material Technology FT-Wax-F100 is a methylene polymer, which is an alkane polymer synthesized from hydrocarbon syngas or natural gas. It mainly relies on high quality and cheap raw materials of coal chemical industry for iron-based or cobalt-based synthes is, which has obvious advantages over crude oil wax price.

Fushun Huaxing Petroleum Chemical HX-C9 140 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

Puyang United Chemical C5 Petroleum Resin O-1102 is pure C5 aliphatic hydrocarbon resin. It's designed for Solvent based pressure sensitive adhesive (SBPSA), especially for NR and lIR SBPSA. 0-1102 has lower crystallinity which can brings adhesive good flexibility and creep resistance. So it works as a good tackifier for packing ad hesive, carton sealing, shoes adhesive and mouse trap glue etc. 0-02 lower molecular weight distribution and good color make it can works in SIS based HMPSA. It also can replace part of hydrogenated hydrocarbon resin when production APAO and EVA hot melt adhesive. The lower crystallinity of O-1102 makes it can works as tackifier and softener for tire rubber etc rubber parts production.

LX®-1035 is a thermoplastic low molecular weight, hydrocarbon resin produced by thermal polymerization of mixed DCPD, aromatic and alicyclic monomers derived from petroleum feedstocks.

HIGREE™ CL1102 is an aliphatic hydrocarbon resin specially designed as a binder for thermoplastic road marking formulations. It is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha.This grade of resin shows outstanding affinity with pigments and good flow-ablity and weatherability in thermoplastic road marking application.

Kolon Industries SUKOREZ® SU-525 is white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-525 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

LX®-1200 is a thermoplastic low molecular weight, hydrocarbon resin produced by thermal polymerization of mixed DCPD, aromatic and alicyclic monomers derived from petroleum feedstocks.

HyPrint MVI 2000 is a Naphthenic ink oil marketing specification. This is severely hydrotreated naphthenic printing ink oil has a low odor level, and good solvency and volatility.

Novotrade Invest AS HCR-105AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Gilsonite® Selects 347 is a safe, naturally occurring hydrocarbon resin with unique chemical properties. Added to drilling fluids, it increases performance and reduces cost in deepwater drilling while minimizing risk.

Kolon Industries HIKOTACK® P-90S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Hydrosol A230 ND is a heavy solvent naphtha ND, with a naphthalene content of max. 1% by weight. The high solvent property of the standard quality remains essentially unaffected, as do the other properties.

GC-140 is an aromatic hydrocarbon resin with amber pastille appearance.

LESTAC C100 is pale yellow color, thermal or catalysis-copolymerization process, thermoplastic resin,obtained from mainly thermal polymerizing unsaturated aliphatic diolefins and aromatic coumarone, indene derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for Paint, Printing Ink, Rubber Compound, tire, water repellent agent, concrete curing agent and binder for asphalt, etc.

Kolon Industries HIKOTACK® P-140 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for ing ink. This grade especially shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease set time and to increase gloss. This grade also can be used as binder for color asphlat and tackifier for EVA based hot melt adhesive(HMA). .

Kolon Industries SUKOREZ® SU-100S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This product offers excellent heat stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS), and used as tackifier for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). It is also used as a binder for paint for fusion type roads. SUKOREZ® SU-100S is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Coumarone resin PR-90 is a kind of light yellow to dark brown granular, block and flake thermoplastic solid resin. It is mainly composed of carbon nine fractions reorganized into raw materials, and is a low molecular weight polymer formed by polymerization. It has good solubility, mutual solubility, water resistance, insulation, chemical stability to acid and alkali, and also has the characteristics of good adhesion and low thermal conductivity.

c9 petroleum resin PR1-130 is a by-product of petroleum cracking C9 fraction. It is a resin produced by pretreatment, polymerization, distillation and other processes. It is not a high polymer, but an oligomer with a molecular weight of 300-3000. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance, chemical stability to acid and alkali, and good viscosity adjustment and thermal stability. C9 petroleum resin is generally not used alone, but as an accelerator, regulator, modifier and other resins.

P-120 is an aromatic hydrocarbon resin with pale-yellow pastille appearance.

HyPrint 300 is a Naphthenic ink oil marketing specification. This is severely hydrotreated naphthenic printing ink oil has a low odor level, and good solvency and volatility.

Bitoner Resin BT-2104 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Kolon Industries SUKOREZ® SU-420 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-420 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

Novotrade Invest AS HCR-135AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

P-140 is an aromatic hydrocarbon resin with pale-yellow pastille appearance.

DISAFOAM 990 is a high-deaerating premium antifoaming agent.These is a product with 100% active material and silicone free.

Resinall® 711 is Aromatic hydrocarbon resin. Used in coatings and inks.

DISAFOAM NX is an antifoam of high efficiency for flexographic inks in aqueous system and architectonic paints.

HyPrint MVI 750 is a Naphthenic ink oil marketing specification. This is severely hydrotreated naphthenic printing ink oil has a low odor level, and good solvency and volatility.

c9 petroleum resin PR1-140 is a by-product of petroleum cracking C9 fraction. It is a resin produced by pretreatment, polymerization, distillation and other processes. It is not a high polymer, but an oligomer with a molecular weight of 300-3000. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance, chemical stability to acid and alkali, and good viscosity adjustment and thermal stability. C9 petroleum resin is generally not used alone, but as an accelerator, regulator, modifier and other resins.

Novotrade Invest AS HCR- 95AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

LX®-2600 is a thermoplastic low molecular weight, hydrocarbon resin produced by thermal polymerization of mixed DCPD, aromatic and alicyclic monomers derived from petroleum feedstocks.

Resinall® 771 is Aromatic hydrocarbon resin. Used in inks.