Products in Printing & Packaging: Polyethylene Terephthalate (PET)

Ertalyte® Sterra™ PET is an unreinforced, semi-crystalline grade that is produced from proprietary resin grades made by Mitsubishi Chemical Advanced Materials. Characterized by its excellent wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, this grade is capable of sustaining high loads and retains more of its original strength up to 180°F (85°C) than nylons or acetals. Due to these characteristics, Ertalyte® Sterra™ PET components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing and packaging, and oil and gas industries. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Pacur® APET Polyester Sheet is extruded from polyester resin. It is an exceptionally clear FDA approved material for use in food applications. In comparison to the copolyesters, it offers a better oxygen permeability barrier for packaging of oxygen sensitive products. It offers excellent resistance to many chemicals and solvents and is also an electrical insulator.

Pacur® PETG Copolyester Sheet is extruded from copolyester resin. It is a remarkably clear and tough material, making it ideally suited for use as a blister packaging material. It is both FDA and USDA approved for use in medical device, pharmaceutical, and food packaging applications. It will withstand ethylene oxide, gamma, electron beam, and gas plasma sterilization. Other end uses include general purpose blister packaging, graphic applications, and stationary supplies.

Relpet® QH5821 is with special fast reheat characteristics manufactured using Du Pont’s technology. All Relpet grades are formulated to offer good downstream processability.

Relpet® H7761 is a bottle grade PET resin manufactured using Du Pont’s technology. All Relpet grades are formulated to offer good downstream processability.

Relpet® G5841 is a bottle grade PET resin manufactured using Du Pont’s technology. All Relpet grades are formulated to offer good downstream processability.

Pacur® PETG FLEX is engineered for use in 0.003” to 0.009” gage applications and is extruded from PETG copolyester resin. PETG FLEX is an exceptionally tough material making it ideal for label and thermoforming applications.

White, thermoforming APET film with a tight silicone release on one side

Pacur® RPETG Copolyester Sheet is extruded from a mixture of Pacur’s internally-generated PETG recyclable material and regrind (scrap) material obtained from outside sources. Material obtained from the outside sources has wide variations of quality level. This material is intended for use in “utility” non-FDA applications.

Relpet® Green B80 is widely used to make bottles, APET sheets, strappings and monofilaments.

A slightly hazy PET film with a light-release UV-cured silicone coating.

Relpet® Green S80 is widely used to make bottles, APET sheets, strappings and monofilaments.

Relpet® G5761 is a bottle grade PET resin manufactured using Du Pont’s technology. All Relpet grades are formulated to offer good downstream processability.

Relpet® G5801 is a bottle grade PET resin manufactured using Du Pont’s technology. All Relpet grades are formulated to offer good downstream processability.

The film Krupet-A Pellets blue is made of Polyethylene Terephthalate and is appropriate for high-end applications. It's made up of recycled polymer.

Laser+® HP806 (B93A) is a Polyethylene Terephthalate (PET) material. It is available in Latin America or North America for injection blow molding or stretch blow molding.Important attributes of Laser+® HP806 (B93A) are: Copolymer Eco-Friendly/Green Food Contact Acceptable High ESCR (Stress Crack Resistant) Typical applications include: Bottles Food Contact Applications

BESTDUR® PHG3 is Polyethylene Terephthalate (PET) resins with good chemical resistance, good surface finish and low moisture absorption. BESTDUR can contain different reinforcements, modifiers and colors as well as V-0 flame retardant grades. BESTDUR® PH /01 is a natural PET.

BigRep PET-CF is an engineering-grade filament for high-strength additive manufacturing applications. With exceptional dimensional stability and low moisture absorption, it's the perfect material for printing in industrial environments. Capable of producing exceptionally strong, stiff parts with a fine surface finish and heat resistance up to 100 °C, this material is ideal for functional, performance applications. PET-CF is a reliable and easy to use materials for environments with limited control like a factory floor.

Laser+® W (P41A) is a Polyethylene Terephthalate (PET) material. It is available in Latin America or North America for injection blow molding or stretch blow molding.Important attributes of Laser+® W (P41A) are: Copolymer Eco-Friendly/Green Food Contact Acceptable High ESCR (Stress Crack Resistant) Medium Viscosity Typical applications include: Bottles Food Contact Applications

VERSATECH™ PET 3100 PRIME APET complies with all applicable portions of 21CFR177.1630 of the Food and Drug Administration. Information contained herein is considered accurate to the best of our knowledge. It is offered for your consideration and investigation. No warranty is made or implied. VERSATECH™ PET 3100 PRIME APET is also available in white, black and custom colors.

Neopet Ultra is a food grade PET homopolymer specially designed for biaxially oriented PET (BoPET) which possesses high tensile strength, chemical and dimensional stability, transparency, barrier properties and electrical insulation.

PLASgran PET Hot Washed Flake is a clear, hot washed flake PET from post-consumer beverage bottles. The Processed used is a caustic hot wash with subsequent color and laser flake sorting. PLASgran Recycled Regrinds are high quality regrind polymers produced from controlled blends of recycled materials, to defined specifications.

KODAK ESTAR™ POLYESTER (PET) FILMS 127 is an optically clear and highly conductive flexible film. It offers the highest quality materials and primers.

Laser+® W PJ002 (F43A) is a Polyethylene Terephthalate (PET) material. It is available in Latin America or North America for injection blow molding or stretch blow molding.Important attributes of Laser+® W PJ002 (F43A) are: Copolymer Eco-Friendly/Green Food Contact Acceptable Medium Viscosity Typical applications include: Containers Food Contact Applications

Irpen Group PET-G 3050mm x 2050mm x 5mm is an extruded thermoplastic co-polyester flat sheet that can be used as an alternative to polycarbonate, solid acrylic & PVC sheets. The sheet is characterized by excellent strength to weight radio, outstanding optical clarity, fire resistance & its exceptional thermoforming properties particularly at low temperatures. The superior quality of the sheet ensures suitability for a diversity of applications.

PEPLPET B 113C PET is a Pet Bottle Grade.

PETG (Polyethylene Terephthalate Glycol Comonomer) 3D Printing Filament. PETG - 1 kg benefits include Great impact resistance, Natural color is very clear, Excellent chemical resistance for a clear plastic, Perfect for applications that require high durability and clarity.

Arboblend® V2 combines a great number of material types and a wide range of property profiles. The materials on offer are up to 100% bio-based. Depending on the formula, ARBOBLEND® materials contain biopolymers such as polyhydroxyalkanoates (PHA), polycaprolactone (PCL), polyester (e.g. bio-PET), starch, polylactic acid (PLA), bio-polyolefins (bio-PE), bio-polyamides (bio-PA), lignin, natural resins, natural waxes, natural oils, natural fatty acids, cellulose, organic additives and natural reinforcing fibers. ARBOBLEND® materials are designed to be biodegradable or resistant depending on the intended application. Biodegradability is a property that offers an additional benefit in applications such as urns, plant aids, mulch films and many other uses.

The film Krupet-A Pellets mixed color is made of Polyethylene Terephthalate and is appropriate for high-end applications. It's made up of recycled polymer.

ULTRAMET® HB PCR PET is a metallized biaxially oriented polyester film with 90% content from chemically recycled polyester. UTRAMET HB PCR performance matches that of traditional ULTRAMET with the same film properties, characteristics and can be used for demanding applications that require ultra-high metal to PET adhesion.

Koksan PET K. 076 resin is a general purpose food grade PET copolymer resin that is suitable for a wide variety of application like containers and films. Koksan Pet Resin offers an excellent strength characteristics like dimensional stability and mechanical properties.