Products in Printing & Packaging: Stabilizer

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

ST-LST5350 is a light stabilizer masterbatch with high loading of active substance based on hindered amine light stabilizer (HALS) chemistry. ST-LST5350 is available in pellet form, for general purpose use in automotive applications. The additive induces extremely low levels of unwanted VOCs. It is produced by a reactive process which differs from traditional reactive extrusion.

PUREsorb 531 is an ultraviolet light absorber (UVA) of the benzophenone class, imparting good light stability when used in combination with a hindered amine light.

Makrostab® Thermo 1561 are masterbatches containing antioxidants intended to improve the processing, long-term heat or other, special, thermooxidative stability of the polymer. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

BNX TAHQ (79-74-3)is a sterically hindered dihydroxybenzene antioxidant and stabilizer. BNX TAHQ is non-staining and non-discoloring antioxidant recommended for use in unvulcanized rubber adhesives, tapes and films.

SUNOX® 1076 is a sterically hindered phenolic antioxidant, is highly efficient, nondiscoloring stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oilsand fats. It protects these substrates against thermo-oxidative degradation.

BNX 1076 (2082-79-3)is a hindered phenolic antioxidant that provides excellent processing and long-term thermal stability in a wide variety of organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils, and fats.

Baoding Lucky Chemical Light Stabilizer Lksorb C8481 is nainly used in the field of PE PP film and tape.

Taiwan Colors & Chemicals Dibasic Lead Phosphite (D.L.P.) has excellent lubricity, heat stability, weather ability, good electrical insulation and no spewing of fatty acid. It has weak water absorption.

Cel-Span® S 100 is a compounded additive for color stabilization and dispersion. A unique proprietary compounding technique makes it possible to pelletize the entire active stabilizer and dispersant in the formulation without adding additional heat history. Cel-Span® S 100 should be utilized at 0.25% to 1% consistently during the color concentration manufacturing processes for stabilization and dispersion. Cel-Span® S 100 also lessens degradation of pigments and enhances the brightness of color concentrates. The pigment is initially dispersed by dispersing agents in order to prevent the formation of uncontrolled flocculates; a process of contact and adhesion whereby the particles of dispersion form larger-size clusters. Stability of dispersion is a result of interplay of the heat (kinetic) energy of particles, attractive inter-particle forces, and repulsive forces; this also helps to limit short-range Van der Waals forces.

GuangDong Sky Bright Tin Stabilizer A is a Methyl Tin Mercaptide Heat Stabilizer. It is currently the plastic heat stabilizer with the most excellent performance for the rolling, extrusion, and injection molding of hard PVC . It performs specially well in two-times processing and long time processing due to its excellent heat resistance. Because of its high safety, it is especially applicable to food packing and other hard PVC products so as to replace other plastic heat stabilizers that has high toxicity. Because its stability is much better than other organic tin stabilizer, the relevant products have better performance. Also it is more competitive on the price than other organic tin stabilizer like Octyl tin stabilizer. So it has been widely welcomed by many large-scale PVC-processing enterprises, becoming the key adjuvant in the processing of hard PVC.

Himpton HTM 2010 is suited for PVC semi-rigid and flexible products, such as the PVC transparent slice, the particle material for bottle, the heated shrinking film, the potable water pipe & fitting, the building products for diversiform molding and the door & window profiles.

Cel-Span® UVS 717 is a (HALS) concentrate containing a stabilizer package for injection blow molding, extrusion and film applications for polyethylene. Hindered Amine Light stabilizers are the most effective light stabilizers for polyolefins. HALS is extremely efficient because these special additives continuously repopulate themselves during the UV stabilization process.

Everstab LS944 is recommended for various applications which require high light stabilization of polymers including PP. HDPE. ABS. PS. PMMA. SAN. PVC. Nylon. Polyesters. Polyacetal ETC. Main applications are-Polypropylene fibers; Polypropylene tapes; LDPE film; EVA film.

Makrostab® Thermo 3069 are masterbatches containing antioxidants intended to improve the processing, long-term heat or other, special, thermooxidative stability of the polymer. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Makrostab® UV 2002-MD are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

PP UVMB -6 is an oligomeric hindered amine based additive masterbatch containing 20% of the effective substance in carrier resin. It acts as a UV light stabilizer.

HECO® NOX 603 PP is an antioxidant mixture with thermal stabilizer in PP acc. to EU-RL 10/2011 (ff), US - FDA and Pharmacopeia.

Makrostab® UV-TH 2419 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

North Wanxing Chemical Co., Ltd. 1,2,2,6,6 - pentamethyl-4-piperidinol is an important intermediate of hindered amine light stabilizer and synthetic hindered amine light stabilizer. Also it is a key intermediate for medicine, bleaching agent, polymerization inhibitor and epoxy resin cross linking agent.

North Wanxing Chemical Co., Ltd. Light Stabilizer 944 is an oligomeric HALS; it imparts excellent light stability in polyolefin (PP, PE, PVC), PA, polyacetals and polyester. Light Stabilizer 944 shows excellent It shows excellent compatibility and high resistance to extraction. When be used with other HALS together show excellent synergistic effect. In addition, Light Stabilizer 944 can be used in food package materials. Now,Light Stabilizer 944 is one of the advanced HALS and is used widely at home and abroad.

North Wanxing Chemical Co., Ltd. Light Stabilizer 622 belongs to the newest generation of polymeric Hindered Amine Light Stabilizer, which has excellent hot processing stability. Terrific compatibility with resin, satisfying tractability against water and extreme low volatility and migratory. Light stabilizer 622 can be applied to PE.PP. Polystyrene, ABS, polyurethane and polyamide etc, optimum effects are obtained when used with antioxidants and UV-absorbers. Light stabilizer 622 is one of the light stabilizers that are sanctioned by FDA to be used in food packages. Reference dosage in PE agricultural film: 0.3-0.6%.

GCH Technology 5326 is especially suited for polyolefins and cold cured polyesters.It has a wide range of indirect food appr in polyolefins. It has a low volatility at high temperatures and high resistance to thermal degradation and c therefore be used without significant loss or decomposition in the polyolefin compounding and molding processes. In the use for the UV protection of polyester resins, 5326 does not form colored complexes wit metallic salts used for the curing process of these resins.

Makrostab® UV 0724/1323 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Ferrostab® PE UV 66-20 Is MB UV stabilizer at 20% on PE for fibers, extrusion and molding, MASTERBATCH ANTI-UV.

Makrostab® UV 1022/1019 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Hebei Jingu Plasticizer HY-B-20 is a kind of slight yellow viscous oily liquid, with viscosity of 325mpa.s, refractive index of 1.473 and density of 0.985. Epoxidized Soybean Oil is not soluble in water, but it is soluble in organic solvent, such as Hydrocarbon, ketone, lipids, higher alcohols, etc. and also slightly soluble in alcohol.

Gabriel Chemie PP7AA1570UV is easy usage, applicable for films, tapes, boards, profiles, pipes, polymer foams, cable isolation, as well as for injection molding. It has UV- Stabilizer for PP tapes and PP-films, HALS-stabilizer.

Sunlight together with heat and oxygen induces reactions of degradation in plastics, causing detrimental effects on their mechanical, optical and physical properties. The result is breakage, chalking and discoloration. Outdoor weathering results in degradation by exposure to the ultraviolet part of sunlight which reaches the earth’s surface, at wavelengths between 300 and 400 nanometres. Environmental factors like temperature, humidity, oxygen, polluting gasses also play an important role.

Methyltin stabilizer for pvc is important tin stabilizer and it is safty and non-toxic additive. Methyltin stabilizer for pvc is mainly used on transparant pham film and food package.

North Wanxing Chemical Co., Ltd. 2,2,6,6-Tetramethyl-4- Piperidone (TAA) is a very important intermediate in the process of synthesizing HALS and a pharmacy intermediate.

S V Plastochem STS - 102 (Di Butyl Tin Maleate) is used in PVC/ ABS. It has excellent light stability & odorless application.