Products in Other Printing & Packaging Applications: Polyethylenes

TRECORA POLYETHYLENE WAX – CWP400 is a High Density Polyethylene Wax intended for use in specifically Hot melt adhesives intended for the packaging industry where heat stability and heat resistance are required.

Marcus Oil and Chemical M200 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

71501S is a LLDPE blown film grade produced by the Spherilene Technology This grade can be used in General Purpose Packaging Film Applications 71501S is additivated with slip and antiblocking additives for excellent openability and slip properties

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

Non polar, high molecular Polyethylene wax

SCG Chemicals LP1020P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary Of SCC Chemicals co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1020P is guaranteed its high quality for various applications.

SCG Chemicals LP1024P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1024P is guaranteed its high quality for various applications.

NUC's LDPE have proven markets that requires low-temperature processability and high-speed processability, which including the application as an inner layer material for confectionery packaging. In addition, these grades are used in everyday life situation such as blue sheets, chemical packaging materials, plastic bags, shopping bags at theme parks and so on.

High viscous non polar Polyethylene wax

NUC's LDPE have proven markets that requires low-temperature processability and high-speed processability, which including the application as an inner layer material for confectionery packaging. In addition, these grades are used in everyday life situation such as blue sheets, chemical packaging materials, plastic bags, shopping bags at theme parks and so on.

Lotrène® LA 0710 is mainly recommended for the extrusion coating at high speed. It contains no additive.

Non polar Polypropylene wax

Flex Series™ ML15T High Adhesion has a medium low density feature for use with primary image high line screen, in combination with fine dot and solid type flexographic printing. Flex Series™ ML15 High Adhesion is a double-sided poly foam with standard thickness.

POLYB® AM-950 is an additives which are used as a compatibilizers with an inorganic material or other resin in the field of the compound or improve the adhesion with other substrates.

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

E5201 is a broad molecular weight distribution HDPE, produced by the Mitsui CX Process E5201 combines exceptional processability with high ESCR and excellent mechanical properties E5201 is particularly recommended for High ESCR Blow Molding, Cable Sheathing & Jacketing Compound, Lamination Film, General Purpose Film and Extrusion Applications

NUC's LDPE have proven markets that requires low-temperature processability and high-speed processability, which including the application as an inner layer material for confectionery packaging. In addition, these grades are used in everyday life situation such as blue sheets, chemical packaging materials, plastic bags, shopping bags at theme parks and so on.

HFG00356 High Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers medium molecular weight material with broad molecular weight distribution copolymer which has been specifically designed for the production of high strength blown film of various thicknesses even down to below 10 micron. It can be easily processed on normal HDPE blown film lines, using melt temperatures between 200 and 220°C.

Marcus Oil and Chemical PR700 is a hard, high melting point, low viscosity, homopolymer polyethylene wax. Consistency is maintained in 500, 000 lb batches. It is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

Alkathene LDD201 is a low density polyethylene designed for a variety of medium to heavy gage (50 – 150μm) general purpose film applications. Alkathene LDD201 is formulated with a process stabilization additive package but contains no antiblock or slip additives

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

Lotrène® FD 0374 is mainly recommended for the extrusion of very thin film for light duty applications. It contains both slip agent and anti blocking additives.

Yi Mei New Material Technology Oxidized PE Wax OPE816 is an excellent new type of polar wax. Because the molecular chain of oxidized polyethylene wax has a certain amount of carbonyl groups and hydroxyl groups, the compatibility with fillers, pigments, and polar resins is significantly improved. Wettability and d ispersibility in polar systems is better than polyethylene wax, and it also has coupling properties, its performance is equivalent to American Honeywell A-C wax.

Flex Series™ MH20 Ultra-High Adhesion has a medium high density feature for solid tone coverage, where primary image graphics are reproduced as solid coverage with minimal process enhancement. Flex Series™ MH20 Ultra-High Adhesion is a double-sided poly foam with standard thickness.

Marcus Oil and Chemical M300 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

SCG Chemicals WD2040P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

NGL015FS is a Butene Co-monomer based Liner Low Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers narrow molecular weight distribution copolymer with slip & antiblock additive which has been specifically designed for the production of high strength blown film of various thickness for multilayer & liners application.

NUC's Low Density Polyethylene (LDPE) achieved a high market share of stretch films for warping and packaging in the wide range of market, because characteristic properties such as good transparency, high surface gloss and easy processing are highly appreciated. Especially, LDPE's with no additives are widely used in the food packaging applications.

Alkathene LDD203 is a low density polyethylene designed for a variety of medium to heavy gage (50-150μm) general purpose film applications. Alkathene LDD203 is formulated with a process stabilization and antiblock additive package but contains no slip additives

NUC's LDPE have proven markets that requires low-temperature processability and high-speed processability, which including the application as an inner layer material for confectionery packaging. In addition, these grades are used in everyday life situation such as blue sheets, chemical packaging materials, plastic bags, shopping bags at theme parks and so on.

HDPE product for injection molding have high stiffness and impact resistance, and are fit for pallets and containers. YUHWA HIDEN M680 product is fit for general articles and thin walled products due to good flowability.

Polyethylene Wax, also known as PE Wax, is an ultra low molecular weight polyethylene consisting of ethylene monomer chains. PE wax has a large variety of uses and applications. PE Wax is available from on-purpose production and as a byproduct of polyethylene production. This material is available in both HDPE and LDPE forms.As there are many grades and types available from IRM, please inquire so that one of our knowledgeable representatives can assist you in locating the correct grade that matches your requirements.

Alkatane HD0390 is an injection molding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness.

NanoMax® HDPE can be processed in common equipment to achieve nanoclay dispersion. No additional compatiblizer is needed in the processing step. For highly filled resin systems, such as Mg(OH)2 filled FR system, we recommend using a twin screw extruder to disperse the masterbatch into the final formulations. For some applications, nanoMax masterbatch products can be dry mixed with the resin in the injection molding stage.

SCG Chemicals LP1040P is a refined polyethylene homopolymer wax which is derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40P is guaranteed its high quality for various applications.

NUC's Low Density Polyethylene (LDPE) achieved a high market share of stretch films for warping and packaging in the wide range of market, because characteristic properties such as good transparency, high surface gloss and easy processing are highly appreciated. Especially, LDPE's with no additives are widely used in the food packaging applications.