Products in Other Printing & Packaging Applications: Polyurethanes (...

SYNTHOLUX 271 UA is a radiation-curing, aliphatic urethane acrylate dissolved in a reactive thinner. It is recommended to use it as a coating wood and paper. It can also be used as a sole binder or together with other radiation-curing binders to increase flexibility. It has applications in wood flooring, industrial coatings, furniture coatings, other packaging, and paper applications.

SYNTHOLUX 1014 W is an aqueous, aliphatic polyurethane dispersion that is physically drying and UV-curable. It does not contain emulsifiers or co-solvents. It is recommended to use it as a coating for wooden substrates that show high elasticity and good chemical resistance. It has applications in industrial coatings, furniture coatings, wood flooring, other packaging, and paper applications.

SYNTHOLUX BW 2096 is a radiation-curing, tin-free UV-dispersion with very excellent mattability and good chemical resistance already after physically drying. It is suitable for waterborne wood application with very good grain enhancement and very good matting behavior. Surfaces are re-emulsifiable before UV curing. It has applications in industrial coatings, furniture coatings, wood flooring, other printing, and packaging applications.

Kamicryl 5360 is an acid containing Polyurethane crosslinked Acrylic emulsion copolymer, which when neutralized with a suitable base forms a highly viscous and very efficient thickening medium for a vast range of water based coatings. Kamicryl-5360 being a polyacrylic thickner gives superior performance than conventional thickners like CMS, HEC. Storage stability of paint with Kamicryl-5360 is much superior than with CMS or HEC. If the system contains enough free alkalinity to neutralize Kamicryl-5360 then “Insitu” solubilization and thickening takes place. If no free alkalinity is present then alkali can be added to the system containing Kamicryl-5360 and “in-situ” thickening will occur. Kamicryl-5360 fully neutralizes at a pH approximately 8.0.

CASA 550 Polyurethane Foam Laminating Adhesive is a sprayable, one-part, water-based adhesive that bonds instantly. It is exceptional for bonding flexible pol-urethane foam, latex foam, fabric, polyester fiber.

HMP-1302 is a Waterborne polyurethane resin with high glossy and high transparency.

Forzal 8020 is a mono component (-NCO) solvent free polyurethane-based adhesive.

Bondthane™ UD-620 s a relatively hard self-crosslinking polyurethane is ideally suited for hard, clear or pigmented coatings for rigid plastics, wood, glass or ceramic tile.

Radiation curing, tin-free UV-Dispersion with very excellent mattability and good chemical resistance already after physically drying.

SINTOPOL MD 110/65% E.A. is a 65% solution in ethylacetate of a polyurethane resin, not reactive, with good adhesion on different bases and with more heat resistance than SINTOPOL MD 100.

SINTOPOL SP 75LV/100% is a urethane resin with good adhesion on polyolefines and with good plasticizing properties.

Aipol Spa APAN is a thermoplastic polyurethane (TPU) pellet, produced through “reactive extrusion” in the Aipol plant of Montegranaro. The TPUs combine the high technical properties of the polyurethane elastomers, to the possibility of processing through a termoplastic technology. A bridge between rubber and traditional thermoplastics.

UNITHANE IC-807 SF is a solvent free, medium soft, high gloss, APEO free, waterbased polyurethane dispersion; with excellent additive compatibility and flexibility properties. Developed for use in a formulated coating for graphic arts, concrete, paint, textiles and selected plastics.

KLEIBERIT 642.1 & Hardener 643.1 is a two component, solvent-free polyurethane adhesive for foil lamination.

Bondthane™ UD-375 is a high solids co-solvent free polyurethane dispersion which exhibits a soft rubbery feel film with low gloss.

Aqueous, Aliphatic modified polyurethane dispersion based on a polyester, Solventfree and triethylaminfree, free of surfactants

SINTOPOL MD 120/60% E.A. is a polyurethane resin - non reactive - intended for the formulation of gravure and flexographic inks with a good adhesion on a variety of packaging substrates.

Aqueous, Aliphatic polyurethane dispersion, physically drying and UV-curable. It does contain neither emulsifiers nor co-solvents

HMP-1303 is a Waterborne polyurethane resin with high glossy and high transparency.

SINTOPOL SP 75LV/80% E.A. E.A. is a urethane resin with good adhesion on polyolefines and with good plasticizing properties.

HMP-1301 is a Waterborne polyurethane resin with high glossy and high transparency.

SINTOPOL MD 100/80% E.A. is a 80% solution in ethylacetate of a urethane polymer, not reactive, with an excellent adhesion on the threated polyolefines.

Bondthane™ UD-615 is a self-crosslinking aliphatic polyurethane dispersion forms a film of medium hardness and modulus values. It is ideal for flexible substrate coatings.

Bondthane™ UD-215 is a medium hard NMP-free polyurethane. It is the perfect compromise between hardness and flexibility. It can be used in leather and PVC topcoat applications as well as ink and OPV formulations. It is SDS and user friendly. It is a good topcoat for a variety of flexible substrates or inks.

Bondthane™ UD-295 is a hard and relatively brittle polyurethane. It can be used in thin topcoats that are diecut.

Bondthane™ UD-250 is an excellent alkali and detergent resistant polyurethane. It is a hard polymer used for wood, plastic, or rigid substrates.