Products in Other Printing & Packaging Applications: Silica

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

Maskom masterbatch & Compound Technologies M 85011 is a PE SLIP / ANTIBLOCK. Applied at a rate of 1-3% to yield the collective combination of the slip and antiblock effect.

SS-SIL 54 is micronized Silica (Gel Type). It used as matting agent, anti-blocking agent and anti-cake agent.

SS-SIL 530 is micronized Silica (Precipitated Type) . It used as matting agent, anti-blocking agent and anti-cake agent.

SiSiB® FS-0250 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 250 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

FUMISIL® M120 is a hydrophobic fumed silica, are produced by chemical treatment of hydrophilic grades with silanes or siloxanes.

Ulmer Weiss 0,5-1,2 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 0.5-1.2 is similar to sand or gravel in appearance with a characteristic odor and grain size of 0.5-1.2. This product does not flash and is non flammable.

SS-SIL 335 is micronized Silica (Gel Type ). It used as matting agent, anti-blocking agent and anti-cake agent.

Juraperle 0,5-1,0 is a fine calcium carbonate granulate designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 0.5-1 is similar to sand or gravel in appearance with a characteristic odor and is not flammable. This product has a grain size of 0.5-1.0.

Ulmer Weiss 150/300H is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Ulmer Weiss 150/300H is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.2 g/cm3.

Ulmer Weiss 0,5-1,0 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 0.5-1.0 is similar to sand or gravel in appearance with a characteristic odor and grain size of 0.5-1.0. This product does not flash and is non flammable.

Juraperle 1-2 is a fine calcium carbonate granule designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 1-2 has an appearance similar to sand or gravel, a characteristic odor, and a grain size of 1.0-2.0.

SILLITIN Z 89 puriss is similar to Sillitin Z 86 puriss but has a higher color requirements.

SS-SIL 355W is micronized Silica Gel Type and wax coating). It used as matting agent, anti-blocking agent and anti-cake agent.

SS-SIL 240 is micronized Silica (Gel Type). It used as matting agent, anti-blocking agent and anti-cake agent.

Ulmer Weiss 1-2 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 1-2 is similar to sand or gravel in appearance with a characteristic odor and grain size of 1.0-2.0. This product does not flash and is non flammable.

SS-SIL 250N is micronized Silica (Gel Type and wax coating). It used as matting agent, anti-blocking agent and anti-cake agent.

SS-SIL 230 is micronized Silica (Gel Type). It used as matting agent, anti-blocking agent and anti-cake agent.

SS-SIL 560 is micronized Silica (Precipitated Type). It used as matting agent, anti-blocking agent and anti-cake agent.

SS-SIL 250 is micronized Silica (Gel Type). It used as matting agent, anti-blocking agent and anti-cake agent.

SS-SIL 450N is micronized Silica (Gel Type and wax coating). It used as matting agent, anti-blocking agent and anti-cake agent.

SiSiB® FS-0380 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 380 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

PM® 304 is 100% active defoamer with silicone fluid and powdered silica. Suitable for solvent base and non-solvent system, exhibiting excellent defoaming property with low dosage. Especially for high viscosity and color coatings and inks.

SILLIKOLLOID P 87 puriss is a finest particle size distribution with good color neutrality.

FUMISIL® 380 is a fluffy white-blue fine amorphous powder with extremely small particle size, enormous surface area and high purity, without taste and odor.

SS-SIL 270N is micronized Silica (Gel Type and wax coating). It used as matting agent, anti-blocking agent and anti-cake agent.

SiSiB® FS-0300 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 380 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

SILLITIN Z 89 similar to Sillitin Z 86 but has a higher color requirements.

FUMISIL® M170 hydrophobic fumed silica, are produced by chemical treatment of hydrophilic grades with silanes or siloxanes.

Criscarb® CM is used Manufacture of paper and paperboard, Manufacture of paints, varnishes and similar coatings, printing ink and mastics, Manufacture of rubber products, Manufacture of plastics products, Building and construction work, Manufacture of soap and detergents, cleaning and polishing mixtures Filling, Mixing Filler or Pigment.

Maskom masterbatch & Compound Technologies M 85025 is a PP ANTIBLOCK. Prevents agglomeration due to rolls wrapped before sufficient cool-down in thin film extrusion process, particularly during summer. Applied at a rate of 1-4%.

SiliXan® M 150 is methacrylate modified polymer based on SiO2 / ZrO2 used as unsaturated binder for the formulation of scratch resistant UV coatings. Additive for commercial acrylate- or methacrylate based coating formulations, inks or binder. This binder is preferably used for UV-curing formulation, but also use for peroxidic thermal curing is possible.

SS-SOL 30E is colloidal silica.It is used for steel casting, hydrophilizing surface, binders for fiber, inorganic binder.