Products in Other Printing & Packaging Applications: Film

Santicizer® Platinum P-1400 is a proprietary, non- phthalate plasticizer designed for use in multiple polymer systems and applications. This material can be used in polymers systems including PVC, latex, polyurethane, and polysulfide to name a few. Santicizer® Platinum P-1400 can be used in many applications including foams, sealants, calendering, plastisols, extrusion and films.

OMNISTAB® LS 292 is a multi-purpose liquid basic HALS for coatings, printing and packaging, adhesives and sealants.

Santicizer® 261A is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer is a C7-C9 alkyl benzyl phthalate that has compatibility in many polymer types, particularly in PVC.

RM40 molybdenum disulfide (MoS2) masterbatches enable injection molders to incorporate the benefits and lubricating properties of MoS2 into their molded nylon parts without purchasing costly pre-compounded MoS2 modified resins. MoS2 is an internal lubricant for nylon compounds. It reduces or eliminates mold drag during molding and acts as a mold release. Post molding component assembly is made easier because of the self-lubricating properties.RM40

RM40Z molybdenum disulfide (MoS2) masterbatches enable injection molders to incorporate the benefits and lubricating properties of MoS2 into their molded nylon parts without purchasing costly pre-compounded MoS2 modified resins. MoS2 is an internal lubricant for nylon compounds. It reduces or eliminates mold drag during molding and acts as a mold release. Post molding component assembly is made easier because of the self-lubricating properties.RM40

RM40Z molybdenum disulfide (MoS2) masterbatches enable injection molders to incorporate the benefits and lubricating properties of MoS2 into their molded nylon parts without purchasing costly pre-compounded MoS2 modified resins. MoS2 is an internal lubricant for nylon compounds. It reduces or eliminates mold drag during molding and acts as a mold release. Post molding component assembly is made easier because of the self-lubricating properties.RM40

It is recommended for various applications which require high light stabilization of polymers.

Astra Polymers Black-MB/P-Type is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

SPECIAL BLACK-912 is polyethylene carrier resin based carbon black pigment masterbatch.

LONGHUA® PC 860-63B having matte polished Film texture is a translucent, textured film, excellent light transmission, recommended for deep color printing on second surface requirement, UL94 V-0.

Beetafin™ BF2820 is a water based Polyurethane emulsion having excellent compatibility with most common water-based systems. The product is suitable for application to a variety of substrates where high quality and longevity are prime requirements.

CM-E02 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

Everstab LS-119 is particularly effective in polypropylene, polyethylene.

LL525 is a hexene copolymer linear low density polyethylene, designed for high quality cast film applications. LL525 is formulated with stabilization additives, but contains no other additives

Plastron Ant 15 is used as combined Masterbatch as antiblocking agent and internal and external lubricant as well for high transparency PET film application

Hanwha Solutions LDPE 950 is manufactured by autoclave process and designed for variety of extrusion coating application such as aseptic paper can, flexible packaging, paper coating etc. LDPE 950 is well known for its good draw-down characteristics and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

NGL015FG is a Butene Co-monomer based Liner Low Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers narrow molecular weight distribution copolymer without slip & antiblock additive which has been specifically designed for the production of high strength blown film of various thickness for multilayer , air bubble film & lamination film application.

Everstab LS-119 is particularly effective in polypropylene, polyethylene, -olefin copolymers and blends with EPR, ERR, PE, EVA, EAA, EVOH and filled PP.

Ferrostab® PE UV 66-40 is an MB UV stabilizer at 40% on PE for fibers, extrusion and molding, MASTERBATCH ANTI-UV.

LONGHUA® PC 860-60B having polished Film texture is a transparent, both sides gloss, excellent light transmission, recommended for deep color printing on second surface requirement, UL94 V-0.

EVERNOX-2246 is one of the most widely used antioxidants for white, light colored and transparent vulcanates that are based on natural or synthetic rubbers. In light colored vulcanates, it retards the crazing effect caused by exposure to light. It does not influence processing and vulcanizing properties. It exhibits low volatility and migration which makes it suitable for use in POM and ABS. EVERNOX-2246 is listed in Section 175.105 of the Food Additives Regulations as a component food packaging adhesives and in Section 177.2600 as a component of rubber articles intended for repeated use in contact with food. Total antioxidant is not to exceed 5% by weight of rubber product. It is also permitted for use in olefin polymers per Section 178.2010 at levels not to exceed 0.1 wt. % of the finished product, in contact with foods of high water content, alcoholic beverages, moist and dry solids containing no free fat or oil on the surface, etc.

Compostable® 7003 Polylactic acid. It is BPI certified for industrial compostability of thermoformed sheet with a maximum thickness of 60 mils (1.50 mm). It is starch-based and gluten-free, made from corn, tapioca and potato starches that primarily come from the American Midwest (versus oil from the Middle East).

EVERNOX-10 is a sterically hindered phenolic antioxidant with a highly effective, non-discoloring stabilizer for organic materials. It protects these materials against thermo-oxidative degradation. EVERNOX-10 can be applied in polyolefins, such as PE, PP and olefin copolymers like EVA. Also its use is recommended in various polymers such as POM, PA, PUR, PES, PBT, PET, PVC, styrenic like IPS, ABS, elastomers like SBS, SEBS, EPM and EPDM as well as synthetic rubbers, adhesives tackifier and other organic substrates. EVERNOX-10 has good compatibility, high resistance to extraction and low volatility, odorless. It can be used in combination with other additives like costabilizers (e.g. thioesters, phosphites, phosphonites), light stabilizer and other functional stabilizers. The synergistic blends of EVERNOX-10 with EVERFOS-168 are extreme performance in polymers stabilization.

Plastron LT- PZ STAB is a stabilizer used for long time stabilization for PE films.

HFG00346 High Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers medium molecular weight material with broad molecular weight distribution copolymer which has been specifically designed for the production of high strength blown film of various thicknesses even down to below 10 micron. It can be easily processed on normal HDPE blown film lines, using melt temperatures between 200 and 220°C.

Plastron Ant PO 10 B is a antiblocking master batch used as antiblocking agent for PO films which are less than 50 µm thickness.

CM-P03 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

Astra Polymers Black-MB is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

SolaTuf® AC1 is used in the following processes: printing, die-cutting, thermoforming, hot stamping, insert molding, laminating, and coating.

71501S is a LLDPE blown film grade produced by the Spherilene Technology This grade can be used in General Purpose Packaging Film Applications 71501S is additivated with slip and antiblocking additives for excellent openability and slip properties

Talc 5004 are additive masterbatch concentrates designed for the nucleation of both commodity and engineering thermoplastic resins. Talc Nucleators typically contain 40 to 60 % by weight of talc in a PE, PP, or PS carrier. Other carriers, and other talc levels, such as 25%, are available upon request. About 80% of the talc particle size used in these products is less than 1 micron, with the remaining particle sizes ranging from 1 to 5 microns. Talc Nucleators are typically used as physical nucleating agents for extruded foam, and are generally used at a 0.4 to 2.0% let-down level, depending upon the application. These products are available in a uniform pellet shape, eliminating the processing concerns associated with dusts or powders.

Bifix PE 491-55 is popular in applications where the presence of anti-blocking can cause difficulties in production and subsequent application. Due to the excellent dispersion of soot, added in larger quantities can also serve as a UV stabilizer. It is also used in the mulch film and cable industry.

Rowlux® SeaGlass Pattern is used in die-cutting, hot stamping, adhesive bonding, printing, silk screening, lithography, and flexography.

Bifix PE 401-53 is a high quality master of snow white tone. It contains an anti-block, and is suitable for use in injection molding and extrusion of foils thicker than 40µm.

Bifix PE 401-52 is a standard milky white master designed for painting medium-demanding applications in thick film extrusion and injection molding. Contains 50% pigment.

EVERNOX-76 is a sterically hindered phenolic antioxidant with a highly effective, non-discoloring, odorless, good compatibility with most substrates and high resistance to extraction. EVERNOX-76 can be applied in polyolefins, such as PE, PP and well as in other polymers such as styrenics and styrene homo and copolymers such as IPS, ABS, MBS and engineering plastics such as PBT, PET and PUR, elastomers like SBS, SBR, BR, adhesives and other organic substrates. EVERNOX-76 can be combined with other additives such as costabilizer (e.g. thioesters, phosphites, phosphonites), light stabilizer and other functional stabilizers. The synergistic blends of EVERNOX-76 with EVERFOS-168 are extreme performance in polymers stabilization.