Products in Packaging Coatings: Improves Adhesion

VINNOL® H 30/48 M is a terpolymer consisting of approximately 70 wt.% vinyl chloride (VC), 29 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It contains carboxylate groups within its structure. This product is primarily employed as a binder for surface coating compounds and printing inks. VINNOL® H 30/48 M acts as a thermoplastic, physically drying binder that forms a film upon evaporation of the solvent in the formulation.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

VINNOL® H 40/55 is a copolymer comprising approximately 62 wt.% vinyl chloride (VC) and approximately 38 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. Functioning as a thermoplastic, physically drying binder, VINNOL® H 40/55 undergoes film formation once the solvent present in the formulation has evaporated.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

VINNOL® H 40/50 is a copolymer composed of approximately 63 wt.% vinyl chloride (VC) and approximately 37 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film as the solvent within the formulation evaporates.

Neol® Neopentyl Glycol Flakes is a colorless solid at room temperature (approx. 20°C) with a sweet odor. It is a bifunctional alcohol used in the synthesis of the following products: Resins, such as polyurethanes and polyesters Polyols, such as polyesters, polycarbonates and polycaprolactones Plasticizers

Acrylic Bead Resins BR-117 is a thermoplastic acrylic resin, with white non-dusting bead form, specially designed for heat sealed adhesives and inks. It has excellent adhesion for metals and plastics. It is also easy to be soluble to aliphatic and alcoholic mixed solvents.   *Acrylic Bead Resins is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Acrylic Bead Resins MB-8031 is a thermoplastic acrylic resin in non-dusting bead form. This product adheres well to various substrates such as PVC, polystyrene, and metal, and is designed for heat-sealed adhesives and lacquers. It offers excellent mechanical performance and has good impact strength and abrasion resistance.   *Acrylic Bead Resins is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

HDO® 1,6-Hexanediol Molten Low PCF is a bifunctional alcohol used in the synthesis of the following products: Resins, such as polyurethanes and polyesters Polyols, such as polyesters and polycarbonates Plasticizers

HDO® 1,6-Hexanediol Flakes is a bifunctional alcohol used in the synthesis of the following products: Resins, such as polyurethanes and polyesters Polyols, such as polyesters and polycarbonates Plasticizers

Neol® Neopentyl Glycol Sol. 90% is a colorless aqueous slurry with a mildly sweet odor. It is a bifunctional alcohol used in the synthesis of the following products: Resins, such as polyurethanes and polyesters Polyols, such as polyesters, polycarbonates and polycaprolactones Plasticizers

BASF 1,5-Pentanediol (PDO) is a colorless liquid at room temperature (20°C). It is miscible in water and organic solvents. It is a bifunctional alcohol used in the synthesis of the following products: Resins, such as polyurethanes and polyesters Polyols, such as polyesters and polycarbonates Plasticizers Piperidine

VINNAPAS® 550 ED is a multi-purpose construction dispersion, specifically suited for cement admixtures, the formulation of two-component cementitious waterproofing membranes, as well as the production of primers. The dispersion is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® ED, which means that it enhances the adhesion and flexibility of mortars.

Dar-Tech Hauthane L-3615 is a Dar-Tech Hauthane polyurethane dispersion that provides tough, chemically resistant, glossy coatings. The product has excellent flexibility and gloss retention characteristics. It may be applied to a variety of substrates, including concrete, metals, plastics, and wood materials. It is mainly used in architectural coatings, DIY brush varnishes, and wood furniture.

Dar-Tech Hauthane HD-2602 is an aliphatic, silicone-modified, polyester-based, waterborne polyurethane dispersion. It was designed primarily for topcoat applications where slip resistance and abrasion resistance are required. HD-2602 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates, including plastics, metals, and textiles.

Texicryl® 13-073 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives. This emulsion is especially suitable for floor tile adhesives and also used in the formulation of primer systems. It controls the porosity and aids adhesion to the base substrates.

Crestakyd® 44-5027 is a short oil alkyd with phenolic resin and rosin modification. It exhibits rapid initial and through drying and high resistance to water, fuels and oil. This modified air drying alkyd has good flexibility and adhesion to metallic substrates.

Crestakyd® 44-5043 is a linoleic/wood oil alkyd modified with both rosin and phenolic. It is supplied as a 60% non-volatile solution in xylene. It has been designed for use in fast drying industrial primer applications with excellent adhesion and resistance to corrosion.

Additive EP024 73 Wa/BG is an epoxy phosphate additive for waterborne stoving enamels. With this resin it is possible to improve adhesion and resistance to corrosion, chemicals and stains.Features & BenefitsFor waterborne stoving enamelsImprove adhesionImprove resistance to corrosion

Additive EP135 is an epoxy-phosphate ester resin developed as an additive for stoving enamels. This resin improves humidity and corrosion resistance, adhesion, chemical resistance, stain resistance and pasteurization resistance.Features & BenefitsFor stoving enamelsImproves humidity and corrosion resistanceImproves adhesion, chemical resistance

Iron drier for high solids.

Iron drier.

Aqueous anionic copolymer emulsion designed for use as a primerless barrier laminating adhesive (can also be used as a primer to promote adhesion and add barrier in extrusion coated structures).

Rovene 6103 is a soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes. Rovene 6103 can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing excellent gloss. The emulsion can also be used as the nonskid component in formulations. Because of the low glass transition temperature, Rovene 6103 has good adhesion to treated flexible films. Inks and overprint varnishes formulated with Rovene 6103 can be formulated with graphic arts industry standard products and additives.

Rovene 6104 is a very soft, film forming vehicle that provides good water and rub resistance for flexographic and gravure inks and overprint varnishes. Rovene 6104 can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing good gloss. The emulsion can also be used as the non-skid component in formulations. Because of the low glass transition temperature, Rovene 6104 has good adhesion to treated flexible films. Inks and overprint varnishes formulated with Rovene 6104 can be formulated with graphic arts industry standard products and additives.

Domopol 5110 50% ND is a saturated polyester resin designed for can coatings: aerosol cans, collapsible tubes with sterilization resistance.Features and Benefits :Aerosol cansAdhesion on aluminum

Domopol 5142 60 SAB/DBE ND is a saturated polyester resin developed for can coating, white base coat. This resin can also be used for coil coating primers. The bio-based content is 26% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features and Benefits :26% biobased on solid contentwhite base coatgood adhesion in aluminum

Domopol 5100 60 X is a saturated polyester resin designed for can, coil and industrial coatings. This special purpose resin can improve the adhesion of paints to various substrates.Features and Benefits :adhesion improvement on aluminum, steel and galvanized steel improves the intercoat adhesion, corrosion protection, flexibility and gloss

Domopol 5144 60% is a saturated polyester resin designed to improve adhesion on aluminum, steel and plastics (e.g. PVC and ABS) as well as intercoat adhesion. The resin can also be used in can and coil coatings and industrial coatings.Features & BenefitsImproves adhesion on aluminum, steel and plasticsExcellent hardnessFull compliance with FDA regulations

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.