Products in Packaging Coatings: Corrosion Inhibitor

HALOX® 650 is an organic corrosion inhibitor primarily designed for coatings and primers on metal surfaces. It is specifically formulated for use in solvent-borne or powder-coating applications to provide long-term corrosion protection. HALOX® 650 can be used in a variety of applications, including coil coatings, resins such as thermoplastic acrylics or epoxies, powder coating systems such as polyester or TGIC, acid-catalyzed thermosetting systems such as melamine or urea-formaldehyde, and wash (etch) primers based on PVB.

ASCOTRAN® H10 is a ready-to-use, liquid-form, anti flash-rust additive for waterborne coatings and galvanized steel substrates. It replaces mineral anticorrosive pigments and enhances their effectiveness. This product functions as a hydrophobic agent and increases the water resistance of dry films. It helps shield against corrosion in metal packaging.

ASCOTRAN® AL4 is a ready-to-use, VOC-free, liquid-form, anti flash-rust additive for any waterborne coating. It contains a hydrophobic agent that protects nearly dry films under severe ambient humidity conditions. Additionally, this product acts as a corrosion inhibitor for metal packaging protection.

Inhibisil® 75 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

Inhibisil® 73 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

Kronphos PZC contains the optimal ratio of zinc, phosphorus and calcium, and is in great demand with consumers. It is used for manufacturing of corrosion-resistant materials to provide long-term protection against corrosion.

Kronphos CP is an inorganic white pigment; it is used in paintwork products to enhances anti-corrosion properties and adhesion strength. Thanks to the lamellar structure of the pigment particles, the barrier-layer effect of the coating is enhanced on the anodic area.

Novinox®PAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Novinox®PAZ is suitable with a wide range of resins, both solvent and water based. Novinox®PAZ is also an excellent alternative to Strontium chromate in coil coatings.

KRONPHOS PZA is a zinc aluminum orthophosphate with improved phosphate loading. This leads to a controlled increase of inhibiting water soluble content and thus a better formation of protective layers on the metal surface

Delaphos® 2M is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

Zinchem Zinc Dust - SAFZINxxx (Super Pure Super Fine) uses a uniquely designed Zinc Dust plant (world-wide patents pending) to produce a range of zinc dust with the highest purity and a finely, uniformly controlled particle size. The range complies with the ASTM D520 standard.The zinc dust is suitable for both organic and inorganic primers. The complete range ensures that the different dry film thickness for a range of zinc primers can be attained.

Habicor® ZA is a Zinc phosphate based anticorrosive pigment. Chemical Structure is Modified zinc aluminum polyphosphate.

Waynflash™ 111 is a liquid flash rust inhibitor which contains sodium nitrite as part of its flash rust inhibition matrix. It is a highly effective inhibitor for the flash rusting on ferrous substrates during aqueous paint phase. It has also proven to be affective in preventing in can rusting. Typical used levels range from 0.25 – 1.0% max. based upon total formula weight. It is highly versatile and can be used in any water based systems. Waynflash™ 111 exhibits good paint stability and can be incorporated at any stage of paint manufacturing. It is both HAPS and APEO free.

Pigmentan PIGMENTAN 465M-FG is a premium environmentally friendly anticorrosive pigment. Suitable for thin film solvent based primers. Excellent cost effectiveness and performance.PIGMENTAN 465M-FG is useful both for low film weights, and for easier dispersion of the anti-corrosive pigment into the paint system.

Wayncor™ 240 - Corrosion Inhibitor Pigment is a white Basic Zinc Molybdate anti-corrosive pigment which imparts good corrosion resistance to protective primers. It has a wide variety use in thermo set and thermo plastic systems. It can be used alone or in conjunction with other anti-corrosive additives. The typical use level for this product is between 3 – 7% based on total formula weight. It has a small particle size and narrow distribution which will permit it to be used in wash primers, DTM, or primer applications.

NiCHEM No. 2Y Basic Lead Silico Chromate is an excellent corrosion inhibitor that is easy dispersing basic silicon lead chromate and extremely stable. It is used in metal protective coatings and is specified for use in metal primers and finishes by state transportation departments and federal agencies. It has excellent color permanency and may be used in a variety of anti-corrosive finishes.

SNCZ Zinc Phosphate PZ20 is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Thanks to its low solubility, Zinc phosphate PZ20 is compatible with a wide range of solvent and water based resins.

Pigmentan PIGMENTAN EMX is a low cost, high performance, environmentally friendly, direct (1:1) substitute for basic Zinc Phosphate. It is suitable for use in primers for both ferrous and non-ferrous metals. Pigmentan MX is non toxic and contains no Zinc, Chrome, or other heavy metals, and does not require hazardous labeling.

Waynflash™ 115 is a liquid flash rust inhibitor that is based on WPC’s nitrite free chemistry. It is a highly effective inhibitor against flash rusting on ferrous substrates (such as galvanized steel) during the aqueous paint phase. Typical use levels range from 0.25 – 1.0% based upon total formula weight. It can be used in any water based primer or DTM system. Waynflash™ 115 exhibits good paint stability and can be incorporated at any stage of paint manufacturing. It is both HAPS and APEO free.

Zinchem Zinc Dust - type 1 Super fine uses a uniquely designed Zinc Dust plant (world-wide patents pending) to produce a range of zinc dust with the highest purity and a finely, uniformly controlled particle size. The range complies with the ASTM D520 standard.The zinc dust is suitable for both organic and inorganic primers. The complete range ensures that the different dry film thickness for a range of zinc primers can be attained.

Delaphos® 4 is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

Habicor® CP 4295 is a Orthophosphates and Polyphosphates, Chemical Structure is Chromium(III) phosphate.

Kronphos PZ is a dehydrate of zinc phosphate designed for manufacture of the anti-corrosive paints, used in demanding environment. The zinc phosphate of the PZ brand has established itself as a reliable anti-corrosion product. High zinc content allows you to add a smaller amount of pigment to obtain excellent anticorrosive properties of your products. The tone luminosity of 99% confirms the purity of our product and enables one to use the antirust pigment of the PZ brand in more complex and responsible formulations of your production.

Zinchem Zinc Dust - Micron 7 Type I uses a uniquely designed Zinc Dust plant (world-wide patents pending) to produce a range of zinc dust with the highest purity and a finely, uniformly controlled particle size. The range complies with the ASTM D520 standard.The zinc dust is suitable for both organic and inorganic primers. The complete range ensures that the different dry film thickness for a range of zinc primers can be attained.

PHOPHINOX PZ06 is a basic Zinc phosphate designed to be more reactive than standard Zinc phosphate in PU and alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. PHOSPHINOX PZ06 is an alternative to chromates, for instance it successfully replaces chromates in wash primers.

ProHere® P 00902 - An additive provides corrosion resistance and metal adhesion when used in can and coil, die lubes and industrial maintenance applications. The resulting coating may be removed by alkaline cleaners.

Novinox®PAS is a corrosion inhibiting pigment suitable for a wide range of applications. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Novinox®PAS is suitable for a wide range of resins, both solvent and water based systems. Novinox®PAS is also an excellent alternative to Strontium chromate in coil coatings.

AB RUST® CH4 is designed to offer a flash-rust inhibitor. It is easy to use with the largest compatibility with the traditional binders used in water based coatings, very efficient at low dosage (< 0.5% in acrylic based formulations), and usable everywhere in the world thanks to the listing of its components in the world chemical inventories.

NiCHEM No. 3 Strontium Chromate is a corrosion inhibiting pigment for use in solvent and water based primer systems.

RAYBO 60 NoRust is a versatile and extremely effective flash rust inhibitor. It contains both vapor phase and contact corrosion inhibitors. As a result, RAYBO 60 prevents flash rusting in latex systems intended for direct to metal application. It also provides corrosion protection to unlined cans.

Delaphos® 2 is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

Zinchem Zinc Dust - type 1 Mining grade uses a uniquely designed Zinc Dust plant (world-wide patents pending) to produce a range of zinc dust with the highest purity and a finely, uniformly controlled particle size. The range complies with the ASTM D520 standard.The zinc dust is suitable for both organic and inorganic primers. The complete range ensures that the different dry film thickness for a range of zinc primers can be attained.

NiCHEM No. 2 Basic Zinc Chromate is a corrosion inhibiting pigment with low solubility. It is especially suited for pretreatment primers (wash primers) and meets government specifications.

Zinchem Zinc Dust - Micron 5 Type I uses a uniquely designed Zinc Dust plant (world-wide patents pending) to produce a range of zinc dust with the highest purity and a finely, uniformly controlled particle size. The range complies with the ASTM D520 standard.The zinc dust is suitable for both organic and inorganic primers. The complete range ensures that the different dry film thickness for a range of zinc primers can be attained.