Products in Packaging Coatings: Waxes

Micronized Polyethylene wax

Michem® Lube 743 - A wax emulsion has excellent compatibility in water-based coating applications and provides water, block, and mar resistance.

Kemfluid 220-L is a fatty amide, used an anti-static and pigment dispersion agent. Hardening agent for paints, lacquers, asphalts, etc. In PVC used for calendering or blown film extrusion. Lubricant for ABS, polystyrene, acrylnitrile styrene, polystyrene and polypropilene pigment dispersion agent.

Michem® Emulsion 93235 - A phenol-free additive best used in water-based coatings where improved slip, rub resistance, hardness, or block resistance is needed. It provides effective mar resistance in floor polish formulations, and shine and mar resistance in auto polish formulations.

Michem® Lube 160PF is APEO-free additive imparts slip, abrasion resistance and anti-block properties in a variety of coatings and varnishes.

Fine powder polyolefin wax, coated with micro-sized PTFE (Eco coated)

LUBA-print® C 10/XB is a wax dispersion / wachsdispersion product.Uses in wood varnishes. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

CERETAN® MCXF 6610 is a Spherical, micronized functional blend, based on Polyethylene and Carnauba wax coated with PTFE. This product is used as a Very good antiblocking, excellent slip, improved gloss, very good abrasion,- scratch,- and rub resistance.

LUBA-print® 459 is a Wax dispersion / Wachsdispersion. It is used as a solvent- based lacquers to improve hydrophoby and antiblocking.

CERETAN® MM 8220 is a Spherical, micronized, partially saponified Montan wax (Montan wax "OP"). This product in paints and coatings is used as an excellent matting effect, ideal surface properties, wax density ca. 1.00 g/cm³ analog to water and oils, ideal for low surfactant formulations, very good adhesion on uneven, porous, flexible and soft grounds, less hydrophobic than other micronized waxes, for hydrophilic systems/pigments, and in Masterbatch it is used as a dispersing agent, lubricant, 100 to 400 times smaller particles compared to course powder (e. g.“Montan wax OP powder“).

Michem® Lube 190 - A wax emulsion provides mar, rub, block, and scratch resistance, and improved water resistance in coatings and graphic arts formulations.

Michem® Lube 156 PFP - A wax emulsion provides scratch resistance, lubricity, release, and anti-block properties in auto polishes, cosmetics, paints, coatings, and graphic arts.

LUBA-print® 897/PM (ND) is in wax dispersion form and have applications in solvent-based lacquers for high gloss can-and coil-coatings. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

CERETAN® MXD 3920 is a spherical, micronized functional blend, with a coating, which provides diamond-like hardness.Properties are excellent surface hardness (Mohshardness 10), excellent scratch resistance. Applications in Paints and coatings, e. g. industrial coatings, powder coatings, wood coatings, Can und Coil Coating.Functional blend with a coating of diamond-like hardness, which provides superior surface hardness. It is harder than pure PTFE and can be used in lower amounts.

Fine powder, polyolefin wax, coated with micro-sized PTFE (Spot coated)

CERETAN® MF 5010 is a spherical, micronized polyolefin wax modified with PTFE.Properties are good rub resistance, very good slip, good heat resistance, good solvent resistance, higher PTFE-content than CERETAN MF 5710. Applications in Paints and coatings e.g. can - and coil-, wood-, industrial- and powder coatings.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

LUBA-print® 501/XB is a wax dispersion / wachsdispersion product.Industrial lacquer applications. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

LUBA-print® 255/B is a Wax dispersion / Wachsdispersion.It is also used as a solvent based and aqueous lacquers for can and Coil coatings to improve slip property and mar resistance.

Micronized polyolefin wax, fully coated with micronized PTFE

CERETAN® MM 8920 is a spherical, micronized modified Montan wax.This product have excellent rub and scratch resistance matting ideal surface properties wax density approx. 1,00 g/cm³ analog to water and oil, ideal for low surfactant formulations excellent adhesion on porous, uneven, flexible and soft substrates Less hydrophobic than other micronized waxes For hydrophilic systems / pigments Application are high quality paints and coatings e.g. powder, can, automotive, industrial, furniture and parquet coatings as well as UV- curing systems High quality printing inks e.g. overprint-, screen-, flexo-, offset and intaglio inks

LUBA-print® KL 30 is a Wax dispersion / Wachsdispersion. It is used as aqueous lacquers to improve slip property and aqueous flexo printing inks to improve rub resistanc

Ultrafine™ 1000 A is a finely micronized polyethylene wax powder recommended when maximum rub and mar resistance, block resistance, slip, re-coatability and elevated processing temperatures are required. The average particle size of Ultrafine 1000 A is 7 microns with a narrow distribution of particle sizes for ease of dispersion and uniformity during processing. Addition levels range from 0.5 to 3%, depending upon application requirements.

CERALENE® 1X is a low density polyethylene wax with a typical average molecular weight of 1200 MW.

ProHere® L 90013 is used as an additive to provide lubricity, block and abrasion resistance and scratch resistance to metal coatings.

Gans Ink & Supply Co., Inc. L-6000 Gloss Overprint Varnish has been formulated as a general overprint varnish suitable for either in-line (wet on wet) or off-line (wet on dry) overprinting.

CERETAN® MT 9015 is a spherical, micronized Fischer Tropsch wax.CERETAN® MT 9015 have improved scratch resistance, especially suited for thin layers and hydrophobizing. Applications in Paints and coatings, e.g. powder-, can-, coil-, auto-, industrial-, furniture and parquet coatings Printing inks e.g. gravure-, overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Kemfluid 201 is a polyethylene wax, used in extrusion of rigid or soft PVC. External lubricant with low amount of filler. Gives good surface shine.

CERETAN® MX 9510 is a spherical, micronized functional blend.increased abrasion resistance increased scratch resistance very good dispersing properties and -compatibility very good anti- blocking Application Paints and coatings, e.g. powder-, can-, furniture-, parquet- and industrial, Coatings Printing inks, e.g. overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks,CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

EMULTROL CM-2357 is an additive emulsion based on paraffin and polyethylene wax. This product serves as the modification in aqueous coatings, paints, inks and textile dyes. Furthermore EMULTROL CM-2357 is very suitable for the surface coating of metal coils as well as for the coating of can coatings. By adding EMULTROL CM-2357, very good antiblocking, good gliding properties and the improvement of the scratch resistance and a very high water resistance is produced at the dried coating films. Varnish surfaces which are equipped with EMULTROL CM-2357 or materials which are treated with it do not pollute so fast and can be easier cleaned at a pollution, because of the special surface effect.

Ultrafine™ 1W A is a polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1W A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Recommended usage level is 1 to 4%.

Micronized polypropylene wax

LUBA-print® B 15/XB is wax dispersion / wachsdispersion product.Wood lacquer applications. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

CERETAN® MXS 3615 is a spherical, micronized carnauba wax, coated with silica.In Powder metallurgy Application Powder metallurgy Paints and coatings, such as industrial and wood coatings Printing inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Fine powder, polyolefin wax, fully coated with micro-sized PTFE

LUBA-print® 164/R is a Wax dispersion / Wachsdispersion. It is also aqueous lubricant and release agent / Waterbased lacquers, to improve antiblocking, slip and scratch resistance. Pelletizing aid for granule technique: the additive will be used in underwater pelletizing and keeps the granules non-sticking and free-flowing.

Optirub™ OP A is a micronized, oxidized polyethylene that easily disperses into aqueous systems. Optirub OP A is processed to a 12 micron average particle size and formulated to give excellent rub resistance, lubricity, gloss and anti-blocking properties. Addition levels range from 0.5 to 2%, depending upon application requirements.