Products in Packaging Coatings: Primer

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P Naphtha.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

KAOPLATE™ 27 is water-washed, coarse kaolin clay is perfect for architectural coatings and e-coat primers. Its low oil absorption will allow for higher loadings in paints and coatings. KAOPRIMETM 27 is designed for use in water-based systems. Its large particle size, whiteness, and low oil absorption combine to make it a cost-effective filler.

Araldite® GZ471X75 is a medium molecular weight epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. Araldite® GZ 471 X 75 yields similar performance than Araldite® GZ 7071 X 75 but due to lower molecular weight the compatibility with insoluble, acrylics and alkyd-amino combinations is improved.

WSCM-1204 has the viscosity is reduced and the operability is better.

NEVOXY® EPX-LH is a low molecular weight, methyl styrenated phenol liquid hydrocarbon resin produced by catalytic polymerization of petroleum derived feedstocks.

Thermoplastic Acrylic resin

WSCM-1154 has low viscosity, faster curing speed and improved bonding strength, excellent paint film appearance and adhesion to the concrete surface.

NiCHEM No. 3 Strontium Chromate is a corrosion inhibiting pigment for use in solvent and water based primer systems.

AB RUST® CH4 is designed to offer a flash-rust inhibitor. It is easy to use with the largest compatibility with the traditional binders used in water based coatings, very efficient at low dosage (< 0.5% in acrylic based formulations), and usable everywhere in the world thanks to the listing of its components in the world chemical inventories.

POLYTONE™ P 140 is a modified phenolic resin for use with drying oil, such as linseed & tung oil.

Zinchem Zinc Dust - type 1 Mining grade uses a uniquely designed Zinc Dust plant (world-wide patents pending) to produce a range of zinc dust with the highest purity and a finely, uniformly controlled particle size. The range complies with the ASTM D520 standard.The zinc dust is suitable for both organic and inorganic primers. The complete range ensures that the different dry film thickness for a range of zinc primers can be attained.

Zhejiang Hongyu New Materials HY-34 Organic Bentonite is a new type of organic clay, which has the characteristics of easy dispersion and high thixotropy. The product is suitable for low and medium polarity, as well as some high polarity systems. Only a small amount of activator is needed, fast shearing can be dispersed, and it has excellent anti-settling and anti-sagging properties.

Delaphos® 2 is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

Juraperle 120 is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paper, paperboard, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 120 is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.4 g/cm3

PRP Resins R124-52 is a Medium Oil Alkyds.

Zinchem Zinc Dust - Micron 5 Type I uses a uniquely designed Zinc Dust plant (world-wide patents pending) to produce a range of zinc dust with the highest purity and a finely, uniformly controlled particle size. The range complies with the ASTM D520 standard.The zinc dust is suitable for both organic and inorganic primers. The complete range ensures that the different dry film thickness for a range of zinc primers can be attained.

BAL 104 WS-70 is a long oil alkyd resin based on soybean oil fatty acid which offers excellent solvent tolerance and very high filler and extender binding capacity.

Jiangsu Sanmu 775-3 has light color, ligh luster, good compatibility, high hardness, good dryness, high scratch resistance, good storage stability and excellent chemical resistance. It can be applied with alcohol acid, acrylic acid and other resin together. It applies to higher-grade matte paint and wood coatings primer, plastic paint, industrial paint, etc.

MPD Industries EST 5501 99 is a very light color and stable pentaerythritol rosin MPD Industries ESTer with high softening point. Good adhesion balanced with high stability makes it ideal where flexibility and heat resistance are required.

BONDiT™ A-3 is a high performance, high temperature moisture resistant, primer, adhesive, adhesion promoter and additive used with metals, glass & ceramics, elastomers and polymers. BONDiT™ A-3 offers a wide range of capabilities for moisture resistance chemical bonding betweenminerals and polymers, as well as dissimilar polymers. it is used as a primer coat and additive for other BONDiT™ coatings and encapsulants. BONDiT™ A-3 may be used as an additive to other coatings, fiber fills, and adhesives to promote superior improvement in performance in harshenvironments.

LAVIOSA VISCOGEL™ XD is a new high performing, highly effective rheological additive for solvent-borne systems of low to medium polarity. that provides thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ XD is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound. Unlike most of the other conventional organoclays, LAVIOSA VISCOGEL™ XD is selfactivating and easily dispersible, hence simple and convenient to use.

NiCHEM No. 2 Basic Zinc Chromate is a corrosion inhibiting pigment with low solubility. It is especially suited for pretreatment primers (wash primers) and meets government specifications.

Shandong Huijin Chemical 300 polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

ALBA 6M is a solvent-based, standard non-leafing aluminum paste with a lining finesse. It is recommended for polychromatic finishes and can/coil coatings, spray cans, paper coatings, and printing inks, and is suitable for general industrial coatings.

ADDAPT BioWet 45 is a solvent free, ready biodegradable wetting/leveling agent for aqueous systems such as cleaning agents and coatings/lacquers on glass substrates. ADDAPT BioWet 45 exhibits good dynamic and static surface tension values. A blend of PolyAlkylene Glycols and Polyhydroxy - Amide. The ingredients are EINECS registered.

BONDiT™ A-43 is a high performance, high and low temperature one-part primer, adhesive, adhesion promoter for metals, glass & ceramics, elastomers and polymers. BONDiT™ A-43 offers a wide range of capabilities for promoting single coat chemical bonding between minerals and polymers, as well as dissimilar polymers. it is used as a primer coat for other BONDiT™ coatings and encapsulants.

RESINA R 35 is a cyclized rubber derived from natural rubber. It gives high viscosity solutions.

MPC-PROKIM Chemicals SO65W60 is a long oil air drying alkyd resin based on soya bean oil. It presents a good gloss retention, a good durability, a good brushability and a good resistance to yellowing.

CH Polymers CHP 553 FREE is an acrylic polymer containing 50% solid and is MIT Free.

Replacol® 262 is alkyl phenol formaldehyde resins.

Yuta UR-728 is used as primer for metal and plastics. Basecoat for auto refinishes.

Jiangsu Sanmu 740A has light color, ligh luster, good compatibility, high hardness, good dryness, high scratch resistance, good storage stability and excellent chemical resistance. It can be applied with alcohol acid, acrylic acid and other resin together. It applies to higher-grade matte paint and wood coatings primer, plastic paint, industrial paint, etc.

SYNTHEMUL® 40-416 is high-performance acrylic latex ideal for exterior house and trim paints. Performance features include alkyd-like adhesion to a variety of difficult substrates, particularly chalky surfaces and aged gloss alkyd. 40-416 based paints have excellent early water resistance and also show superior efflorescence resistance thus are good for masonry/cementitious surfaces.

Ulmer Weiss 1-2 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 1-2 is similar to sand or gravel in appearance with a characteristic odor and grain size of 1.0-2.0. This product does not flash and is non flammable.