Products in Packaging Coatings: Epoxies (EP)

AB RUST® CH4 is designed to offer a flash-rust inhibitor. It is easy to use with the largest compatibility with the traditional binders used in water based coatings, very efficient at low dosage (< 0.5% in acrylic based formulations), and usable everywhere in the world thanks to the listing of its components in the world chemical inventories.

Delaphos® 2 is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

DISPHERHIC D CHROMA ORANGE PO 36 colorant is specifically designed for tinting high performance, non-aqueous, industrial and maintenance coatings. It is based on an unique universal resin technology (modified Ketone Aldehyde).

DISPHERHIC D CHROMA MAGENTA PR 122 colorant is specifically designed for tinting high performance, non-aqueous, industrial and maintenance coatings. It is based on an unique universal resin technology (modified Ketone Aldehyde).

Shandong Huijin Chemical 300 polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

ADDAPT BioWet 45 is a solvent free, ready biodegradable wetting/leveling agent for aqueous systems such as cleaning agents and coatings/lacquers on glass substrates. ADDAPT BioWet 45 exhibits good dynamic and static surface tension values. A blend of PolyAlkylene Glycols and Polyhydroxy - Amide. The ingredients are EINECS registered.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

EkaSol™ 1 is a VOC compliant, low toxicity solvent that is an efficient and cost effective replacement for Methyl Ethyl Ketone (MEK).

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

RAYBO 60 NoRust is a versatile and extremely effective flash rust inhibitor. It contains both vapor phase and contact corrosion inhibitors. As a result, RAYBO 60 prevents flash rusting in latex systems intended for direct to metal application. It also provides corrosion protection to unlined cans.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Short-oil drying alkyd resin

Mfsorb® 203 is a benzophenone UV absorber, high performance anti-aging additives. Light color, good compatibility, low migration, easy processing.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Defoamer for solvent borne coating systems, biodegradable. BLISTER FREE 88 is especially suitable in polyester systems free from paraffins. BLISTER FREE 88 shows also good defoaming in epoxy, PUR and acrylate based systems.

IMI Fabi CHD2 is used as primers - general industry Anticorrosion - Wood pigmented.

Anti-foam and deaeration additive for use in unsaturated polyesters, coil and can coatings, epoxies and PVC-compounds

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Novinox®PAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Novinox®PAZ is suitable with a wide range of resins, both solvent and water based. Novinox®PAZ is also an excellent alternative to Strontium chromate in coil coatings.

Nigtas 20 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Road Marking Paints, Epoxy Paints.

KRONPHOS PZA is a zinc aluminum orthophosphate with improved phosphate loading. This leads to a controlled increase of inhibiting water soluble content and thus a better formation of protective layers on the metal surface

Rheological additive for water-based coating systems, free of VOC, APEO and organotin. SCHWEGO pur 8350 is suitable for interior and exterior wall paints, water-based coatings and anticorrosive coatings, modified resin plasters and fillers based on fine size Polyacrylates, Styrene copolymers, Vinylacetate- or PUR-dispersions. SCHWEGO pur 8350 shows a high gloss retention in glossy emulsion paints compared to acrylic and cellulosic thickening additives.

Sunnyside corporation Lacquer Thinner 457G1 is a fast evaporating, extremely flammable organic solvent mixture. It is designed for thinning lacquer and epoxy coatings, and is also recommended for clean up of spray guns and other application equipment.

Replacol® 260 is alkyl phenol formaldehyde resins.

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

ADD-3236 is a silicone surface additive with defoaming properties to improve the surface properties of coatings, with particular emphasis upon leveling, it increases surface slip and thus improves scratch and mar- resistance. ADD-3236 is a heat resistant due to the alkyl-modification, which shows no thermal decomposition at high temperatures in baking systems such as coil coatings (up to 280°C for 15 minutes).

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

Nigtas 10 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Epoxy Paints, Marine Paints, Epoxy Paints, Static Powder Coatings.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

The PanTINT® 81 Series are volumetric / gravimetric factory colorants for solvent-based industrial maintenance, general industrial finishes and wood coatings. The PanTint® 81 Series are prime examples of optimized dispersions, rendering the maximum color value of each color pigment. As with the other PanTint® Series of products, you can expect broad compatibility with a wide range of resin systems. The pigment selections are selected based on performance requirements often seen in industrial applications; colorfastness, weather and chemical resistance.

WPC Technologies Strontium Chromate 177, with the chemical formula of SrCr04, is a low dust and very low oil absorption corrosion inhibitor pigment. It is recommended for high solids primer formulations. It is characterized by a unique high apparent bulk density and is widely used in aerospace primers for aluminum protection.

DISPHERHIC D CHROMA YELLOW IRON OXIDE PY 42 colorant is specifically designed for tinting high performance, non-aqueous, industrial and maintenance coatings. It is based on an unique universal resin technology (modified Ketone Aldehyde).

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.