Products in Packaging: Polyethylenes

993 Products found in Packaging

Browse Applications

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Cast Film Extrusion
Melt Flow Index:2.7 - 2.7 g/10 min

Braskem EB853 low density polyethylene (LDPE) is produced under high pressure in a tubular reactor. Films obtained with this product show outstanding optical properties, good sealability, and low gel content.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America LDF0034

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Extrusion, Film Extrusion
Melt Flow Index:0.34 - 0.34 g/10 min

Braskem LDF0034 is a low density polyethylene (LDPE) of high molecular weight that provides high mechanical strength. It is used in extrusion of tubular films with excellent mechanical properties and heat shrinkage.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America LDF0080

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Extrusion, Film Extrusion
Melt Flow Index:0.8 - 0.8 g/10 min

Braskem LDF0080 is a low density polyethylene (LDPE) with good mechanical and optical properties.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America LDF2023S1

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
Additives Included:Anti-Blocking Agent, Slip Agent
Melt Flow Index:2.0 - 2.0 g/10 min

Braskem LDF2023S1 is a low density polyethylene (LDPE) which contains slip and antiblock additives. It has good optical properties and excellent processability.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America LDI2020

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Injection Molding
Melt Flow Index:20.0 - 20.0 g/10 min

Braskem LDI2020 is a low density polyethylene (LDPE) resin produced at high pressure condition in tubular reactor designed for injection molding. Products molded with this resin have a good balance between stiffness, smoothness, dimensional stability and processability.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America GF4950HS

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM)
Melt Flow Index:20.0 - 20.0 g/10 min

Braskem GF4950HS is a high density polyethylene copolymer offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America HD3403S

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:4.5 - 4.5 g/10 min

Braskem HD3403S is a high density polyethylene with outstanding organoleptic properties in addition to great processability and high stiffiness.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America HDB6050

Polymer Name:Polyethylene Copolymer
Processing Methods:Blow Molding
Melt Flow Index:5.0 - 5.0 g/10 min

Braskem HDB6050 is a high molecular weight copolymer grade developed for the production of medium large blow molded articles. It provides excellent processability, good rigidity, outsanding chemical resistance, high impact strength and high enviromental stress cracking resistance (ESCR).

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America LDF0025

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Injection Molding, Film Extrusion
Melt Flow Index:0.25 - 0.25 g/10 min

Braskem LDF0025 is a low density polyethylene of high molecular weight that provides high mechanical strength. The product is highly versatile and can be used in several applications due to their easy processability and high compatibility with other types of polyethylene. It does not contain antiblock and slip additives.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America HDB0358

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion, Sheet Extrusion, Pipe Extrusion, Blow Molding

Braskem HDB0358 is a bimodal high density polyethylene copolymer grade. Offers an outstanding balance between stiffness, impact strength, and Environmental Stress Cracking Resistance (ESCR) ideal for a wide range of blow molding applications. This grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America GE7252XP

Polymer Name:High Density Polyethylene (HDPE), Bimodal Polyethylene (Bimodal PE)
Processing Methods:Injection Molding, Compression Molding
Additives Included:Slip Agent
Melt Flow Index:2.0 - 2.0 g/10 min

Braskem GE7252XP is a bimodal high density polyethylene developed for the manufacturing of caps and closures to carbonated soft drinks. This grade offers a good balance between chemical and mechanical resistance and good processability.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaBraskem America HDI0861U1

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding
Additives Included:UV Stabilizer
Melt Flow Index:8.5 - 8.5 g/10 min

Braskem HDI0861U1 is a high density polyethylene (HDPE) with a narrow molecular weight distribution. Parts fabricated from this material exhibit a glossy surface finish and have good impact strength and rigidity. This resin has UV stabilizers.

Braskem AmericaBraskem America HDB0355

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM), Blow Molding
Melt Flow Index:0.35 - 0.35 g/10 min

Braskem HDB0355 is a high density polyethylene copolymer (HDPE) developed for blow molding applications. This product is suitable for applications that require a good enviromental stress cracking resistance (ESCR).

Braskem AmericaRPR 5A1 WE Recycled Polyethylene

Polymer Name:High Density Polyethylene (HDPE)
Labeling Claims:Recycled, Low Carbon Footprint (PCF), Contains PCR Resin, Sustainable
Processing Methods:Extrusion, Blow Molding
Density:955.0 - 955.0 kg/m³

Braskem Recycled PRP 5A1 WE recycled polyethylene is a high-density polyethylene (HDPE) embodying eco-conscious attributes. With labeling claims of being bio-based, containing PCR resin, and having a low carbon footprint (PCF), this polymer emphasizes sustainability. Its notable feature includes excellent environmental stress crack resistance (ESCR). Tailored for containers, small bottles, and blow molding of up to 20 L for chemicals, domestic use, and oils Available in a natural color.

Braskem AmericaBraskem America HDB0763

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Blow Molding, Extrusion Blow Molding (EBM)

Braskem HDB0763 is a high density polyethylene copolymer (HDPE) designed for blow molding of food packaging. It exhibits excellent processing properties and extremely low odor transfer in finished goods.

Braskem AmericaBraskem America LDF2023

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
Melt Flow Index:2.0 - 2.0 g/10 min

Braskem LDF2023 is a non-additivated low density polyethylene (LDPE). It has good optical properties and excellent processability.

Braskem AmericaBraskem America HDI0653U1

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding
Additives Included:UV Stabilizer
Melt Flow Index:6.2 - 6.2 g/10 min

HDI0653U1 is a high density polyethylene copolymer (HDPE) with a narrow molecular weight distribution and is developed for injection molding segment. Parts made from this material exhibit a shiny surface and good impact strength and stiffness. This resin has UV stabilizers.

Braskem AmericaBraskem America HDI2061

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding
Melt Flow Index:20.0 - 20.0 g/10 min

Braskem HDI2061 is a high density polyethylene (HDPE) for injection molding segment. By having good fluidity HDI20612 provides easy processability and high productivity combined with high rigidity and hardness. The narrow molecular weight distribution gives low tendency to deformation.

Braskem AmericaBraskem America HDB8550

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM), Blow Molding
Melt Flow Index:8.5 - 8.5 g/10 min

Braskem HDB8550 is a natural high density polyethylene copolymer (HDPE) designed for blow molding applications with excellent impact strength and high environmental stress cracking resistance (ESCR).

Braskem AmericaRPR 3A1 NL Recycled Polyethylene

Polymer Name:High Density Polyethylene (HDPE)
Labeling Claims:Recycled, Low Carbon Footprint (PCF), Bisphenol A-free, Contains PCR Resin, Sustainable
Processing Methods:Blow Molding
Density:955.0 - 955.0 kg/m³

Braskem Recycled RPR 3A1 NL is a high-density polyethylene (HDPE) with eco-friendly attributes. Labeled as bio-based, bisphenol A-free, containing PCR resin, and boasting a low carbon footprint (PCF), this polymer emphasizes sustainability. With excellent environmental stress crack resistance (ESCR), it caters to the consumer goods, printing, and packaging markets. Ideal for containers, small bottles, and blow molding of up to 20 L for chemicals, domestic use, and oils. Available in a natural color.

Braskem AmericaBraskem America LDI7022

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Injection Molding
Melt Flow Index:7.0 - 7.0 g/10 min

Braskem LDI7022 is a low density polyethylene (LDPE) resin produced at high pressure condition in tubular reactor. Products molded with this resin exhibit high flexibility.

Braskem AmericaBraskem America HDI0661U1

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding
Additives Included:UV Stabilizer
Melt Flow Index:6.2 - 6.2 g/10 min

Braskem HDI0661U1 is a high density polyethylene (HDPE) with a narrow molecular weight distribution and developed for injection molding segment. Parts made from this material exhibit a shiny surface and good impact strength and stiffness. This resin has UV stabilizers.

Braskem AmericaSBC818

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Extrusion, Extrusion Coating, Film Extrusion
Melt Flow Index:8.3 - 8.3 g/10 min

SBC818 is a low-density polyethylene specially formulated for coating processes. This grade exhibits excellent optical properties, minimal neck-in during processing, film stability, and strong adhesion on porous substrates. It does not contain any additives. Moreover, it has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSTN7006

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Blow Molding, Extrusion, Profile Extrusion, Film Extrusion, Coextrusion
Melt Flow Index:0.6 - 0.6 g/10 min

STN7006 is a low-density polyethylene (LDPE) designed specifically for coextruded films and lamination. This resin offers a remarkable combination of mechanical, optical, and stiffness properties. With low gels content, it ensures the production of films with excellent appearance. STN7006 is identified as PE 114 per ASTM D-4976-04a standard specifications and is free from additives. Notably, this grade contains a minimum of 95% carbon biobased content, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSTS7006

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Blow Molding, Extrusion, Film Extrusion, Coextrusion
Additives Included:Anti-Blocking Agent, Slip Agent
Melt Flow Index:0.6 - 0.6 g/10 min

STS7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin offers an excellent combination of mechanical, optical, and stiffness properties. STS7006 boasts low gels content, ensuring the production of films with a superior appearance. This product is identified as PE 114 according to ASTM D-4976-04a standard specifications. Notably, it contains a minimum of 95% carbon biobased content, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSBF0323HC

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion Blow Molding (EBM), Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion, Film Extrusion
Melt Flow Index:0.32 - 0.32 g/10 min

SBF0323HC is a high molecular weight grade produced using high-pressure technology. This product is specifically designed to create films with outstanding mechanical and optical properties. Moreover, it is additives-free and has a minimum carbon biobased content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSGD4960

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM)
Melt Flow Index:50.0 - 50.0 g/10 min

SGD4960 is a specialized high-density polyethylene homopolymer crafted for blow molding applications. Renowned for its exceptional density and stiffness, it also delivers remarkable impact resistance. With a minimum biobased carbon content of 96%, verified by ASTM D6866, SGD4960 stands as a sustainable choice for diverse manufacturing needs.

Braskem AmericaSGM9450F

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Film Extrusion, Blown Film Extrusion, Cast Film Extrusion, Extrusion
Melt Flow Index:9.3 - 9.3 g/10 min

SGM9450F is a high‐density polyethylene, developed for the high molecular weight film extrusion segment produced with bimodal technology. The film produced from this resin has high tenacity and excellent resistance to impact characteristics. This resin has wide molar mass distribution that makes it easier to process. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866.

Braskem AmericaSLH118

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
Additives Included:Antioxidant
Melt Flow Index:1.0 - 1.0 g/10 min

SLH118 is a Linear Low Density Polyethylene developed specifically for blown film extrusion. Films made with this product exhibit a balanced combination of good processing performance, optical and mechanical properties, and sealability. The resin contains very low gel amount and includes oxidant additives. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSHA7260

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Fibers Extrusion, Compression Molding, Bicomponent Nonwovens Extrusion
Melt Flow Index:20.0 - 20.0 g/10 min

SHA7260 is a high-density polyethylene specifically designed for injection molding, offering ease of processing and high productivity. This resin exhibits a good melt flow, providing high rigidity and hardness to the molded products. Its narrow molar mass distribution reduces the tendency to warpage. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSGF4960

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM), Compression Molding, Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion
Melt Flow Index:28.0 - 28.0 g/10 min

SGF4960 is a homopolymer high-density polyethylene designed for the blow-molding segment. This product offers a winning combination of high density, stiffness, and exceptional impact resistance, making it ideal for various applications. With a minimum biobased carbon content of 96% (ASTM D6866), it demonstrates Braskem's commitment to sustainability. SGF4960's versatile properties make it well-suited for use in sports and recreation equipment, food and beverage packaging, and toys, among others. Its low carbon content further adds to its appeal as an eco-friendly choice.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSHE150

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Fibers Extrusion, Compression Molding, Monofilament Extrusion, Extrusion, Film Extrusion
Additives Included:Antioxidant, Processing Aid
Melt Flow Index:1.0 - 1.0 g/10 min

SHE150 resin is a High Density Polyethylene (HDPE) specifically designed for the monofilament extrusion process. It offers a well-balanced combination of processability, spinnability, and knotting strength, while maintaining minimal gels. Additionally, it contains processing aid and oxidant additives. This grade has a minimum biobased carbon content of 94%, as determined by ASTM D6866. The resin can also be blended with LLDPE to enhance the stiffness of blown films.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSHC7260

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:7.2 - 7.2 g/10 min

SHC7260 is a high-density polyethylene tailored for injection molding, offering high hardness and stiffness, along with low warpage tendency. This grade's organoleptic properties make it ideal for water caps applications. Notably, it contains a minimum biobased carbon content of 94%, determined according to ASTM D6866.

Braskem AmericaSGF4950TT

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Compression Molding, Blow Molding, Extrusion Blow Molding (EBM)
Melt Flow Index:28.0 - 28.0 g/10 min

SGF4950TT is a copolymer high-density polyethylene specifically designed for the blow-molding segment. It does not contain optical brightener in its composition. This grade offers a well-balanced combination of impact and stiffness properties, along with high environmental stress cracking resistance and excellent processability. It has a minimum biobased carbon content of 96%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSPB681

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Injection Molding, Film Extrusion
Melt Flow Index:3.8 - 3.8 g/10 min

SPB681 is a low density polyethylene specifically developed for film extrusion applications. With outstanding processability, this resin ensures excellent stability in producing thin films. The films obtained with SPB681 exhibit exceptional optical properties, making it ideal for various film-related industries. Furthermore, this grade boasts a minimum carbon biobased content of 95%, confirming its commitment to sustainability.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSGF4950

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM), Compression Molding, Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion
Melt Flow Index:28.0 - 28.0 g/10 min

SGF4950 is a high-density polyethylene copolymer, designed for the blow-molding segment. It exhibits a well-balanced combination of impact strength, stiffness, and environmental stress cracking resistance, while ensuring excellent processability. This grade contains a minimum biobased carbon content of 96%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Show

of 993 results