Products in Food & Beverage Packaging: Calcium Salts

CONSTAB CON-X® FL 826 PE is a product that functions as a cavitation agent. It is labelled as recyclable and sustainable and uses polyethylene (PE) as its carrier. The features include flexibility, freeze resistance, recyclability, clarity, tear resistance, excellent seal properties, high efficiency, and low density.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Rainmaker Polymers ACPSCC75NA1 is 75% Calcium Polystyrene. Antiblock concentrates incorporate inorganic components that microscopically "roughen" the surface of blown and cast films. These roughened surfaces minimize the surface contact area between the films and decrease the tendency of these surfaces to adhere to one another.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Rainmaker Polymers ACLLCC80NA1 is 80% Calcium Polyethylene. Antiblock concentrates incorporate inorganic components that microscopically "roughen" the surface of blown and cast films. These roughened surfaces minimize the surface contact area between the films and decrease the tendency of these surfaces to adhere to one another.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

European Plastic Joint Stock Company BIO Filler Masterbatch is made of calcium carbonate (CaCO3) and bio resin as carrier. It has compatibility with PLA, PBS, PBAT and TPS.

Filkan Calcium Filler Masterbatches offers a wide range of products based on CaCO3 for use in blown films, moldings and therforming.

GEMATILEN® BK70 HD is 70% Calcium carbonate filled PE. It is an off-the-shelf compound filler masterbatch. It is from 50% to 80% Calcium Carbonate (Chalk, CaCO3) filled LLDPE based compound. The product has been engineered specifically for FILM and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% or 40% depending on the application.

eskal 10 is a eskal serves as spacer in the production of film in lengths as well as hoses. Hose film can be sprayed in- and outside.

GEMATILEN® FK75 is 75% Calcium carbonate filled PE. The product has been engineered specifically for film and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% depending on the application.

eskal 500 is a eskal serves as spacer in the production of film in lengths as well as hoses. Hose film can be sprayed in- and outside.

CARBOMAX® BIO S65LX-HT is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable and 100% bio-based polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the products made of bioplastics.

GEMASTIREN® FK60 is 60% Calcium carbonate filled PE. These are used in thermoforming and injection molding applications. It is significantly lowers raw material overheads and are 80% more environmental friendly. They are widely used in the manufacture of injection molded products, extrusion products, thermoforming applications.

GEMATILEN® BK80 HD is 80% Calcium carbonate filled PE. It is an off-the-shelf compound filler masterbatch. It is from 50% to 80% Calcium Carbonate (Chalk, CaCO3) filled LLDPE based compound. The product has been engineered specifically for FILM and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% or 40% depending on the application.

CARBOMAX® BIO S65MC-IG is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the films made of bioplastics.

Cas-20® 4 Calcium Sulfate Filler can be used at high loadings and consistently provides an excellent balance of properties and good surface appearance.

CARBOMAX® BIO S65MC is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the films made of bioplastics.

Quality Minerals Calcium Carbonate is the trade name of Quality Minerals PCLís uncoated and coated calcium carbonate. It is a name that is well-known and preferred in the markets. Raw material i.e. calcite is selected from the best sources to consistently produce both coated and uncoated calcium carbonate of various particle sizes. Our calcite has typical purity content of 99% whereby purity content for food additive and pharmaceutical standard is only slightly higher at 99.3%. Reports from SGS and Thailand Ministry of Health showed that our products do not exhibit heavy metal content and hazardous substances. In addition, we comply with the RoHs Directive 2002/95/EC.

CARBOMAX® BIO S65LX is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable and 100% bio-based polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the films made of bioplastics.

GEMATILEN® FK80 is 80% Calcium carbonate filled PE. The product has been engineered specifically for film and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% depending on the application.

GEMATILEN® FK70 is 70% Calcium carbonate filled PE. The product has been engineered specifically for film and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% depending on the application.

CARBOMAX® BIO S65BH is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable and bio-sourced polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the products made of bioplastics.

eskal 60 is a eskal serves as spacer in the production of film in lengths as well as hoses. Hose film can be sprayed in- and outside.

eskal 30 is a eskal serves as spacer in the production of film in lengths as well as hoses. Hose film can be sprayed in- and outside.

GEMASTIREN® FK80 is 80% Calcium carbonate filled PE. These are used in thermoforming and injection molding applications. It is significantly lowers raw material overheads and are 80% more environmental friendly. They are widely used in the manufacture of injection molded products, extrusion products, thermoforming applications.

GEMATILEN® FK60 is 60% Calcium carbonate filled PE. The product has been engineered specifically for film and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% depending on the application.

GEMASTIREN® FK7O is 70% Calcium carbonate filled PE. These are used in thermoforming and injection molding applications. It is significantly lowers raw material overheads and are 80% more environmental friendly. They are widely used in the manufacture of injection molded products, extrusion products, thermoforming applications.

eskal 20 is a eskal serves as spacer in the production of film in lengths as well as hoses. Hose film can be sprayed in- and outside.

eskal 45 is a eskal serves as spacer in the production of film in lengths as well as hoses. Hose film can be sprayed in- and outside.