Products in Industrial & Transport Packaging: Filler

CONSTAB UV 01122 LD combines a cost-effective combination of 15% hals (hidden amine light stabilizer) and inorganic filler. This formulation serves as a filler and extender, a light stabilizer, and a stabilizer, catering to the needs of polyethylene (PE) within a resin-based carrier.

Gupotim A -21 is a thermally conductive, electrically insulating aluminum oxide filler.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Heartland’s Imperium fillers are engineered for polymers. Their particle size typically ranges from 1mm to 6mm.

ACMA 20T Coated Calcium Carbonate is natural, surface treated, ultra fine calcium carbonate manufactured from high purity, very white limestone.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

Cromex PP-CG 50020 is used in blow molding, blown and cast film, injection molding, thermoforming and extrusion.

Gupotim A -11 is a filler mixture that is both thermally conductive and electrically insulating.

Filkan Calcium Filler Masterbatches offers a wide range of products based on CaCO3 for use in blown films, moldings and therforming.

GEMATILEN® BK70 HD is 70% Calcium carbonate filled PE. It is an off-the-shelf compound filler masterbatch. It is from 50% to 80% Calcium Carbonate (Chalk, CaCO3) filled LLDPE based compound. The product has been engineered specifically for FILM and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% or 40% depending on the application.

PALVBLK 716 are Very common grades used in FILMS, PIPES, CABLES, ROTOMOULDING & COMPOUNDING. These master batches are based on LDPE/LLDPE carrier resin in powder form & carbon grades of particle size 20-80 NM is used along with Process additives & stabilizers to get quality Product with High jet blackness & dispersion. These master batches are packed in moisture proof PE bags with liners. All master batches are Dust free & with low moisture content to give all round properties & performance during Processing.

Polyfill Technologies Milky White is the very special masterbatch made from imported mineral filler having the particle size of 5 microns & most suitable for the tape plants having very high line speed of 400 meters/min. & above. The recommended rate of addition is 15 – 20 % with Polymer by weight. We recommend to Pre-heat the material before loading it to the plant for improved higher loading results. Apart from Woven Sack, Milky White can also be used as a functional filler in Vest Bags, Carry Bags, Jumbo Bags, Liners, and Box-Strapping Applications. For these applications one can achieve the loading upto 50% of PHR.

Gupotim A -04 is a filler mixture that is both thermally and electrically conductive.

PALVBLK 711 are Very common grades used in FILMS, PIPES, CABLES, ROTOMOULDING & COMPOUNDING. These master batches are based on LDPE/LLDPE carrier resin in powder form & carbon grades of particle size 20-80 NM is used along with Process additives & stabilizers to get quality Product with High jet blackness & dispersion. These master batches are packed in moisture proof PE bags with liners. All master batches are Dust free & with low moisture content to give all round properties & performance during Processing.

GEMATILEN® FK75 is 75% Calcium carbonate filled PE. The product has been engineered specifically for film and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% depending on the application.

GEMATILEN® BK75 HD is 75% Calcium carbonate filled PE. It is an off-the-shelf compound filler masterbatch. It is from 50% to 80% Calcium Carbonate (Chalk, CaCO3) filled LLDPE based compound. The product has been engineered specifically for FILM and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% or 40% depending on the application.

HITEMA® 40460 PW is a masterbatch which contains high purity titanium dioxide along with a grade of calcium carbonate specific for plastics, with micronized particle size, in a polyethylene carrier with the aim of offering a maximum grade of both dispersion and opacity. It is approved for food contact applications by both FDA and USA..

Interplast PE Filled Masterbatches for HDPE and LDPE film is a PE filled masterbatches which are highly filled compounds of calcium carbonate (CaCO3) and PE grades. Its content is 70-85% (mass) and made on the base of LLDPE. The polymeric carrier of masterbatch is based on LLDPE, which contains calcite (CaCO3) with particle size 2.5-2.8 μm and 70-85% concentration. PE Filled Masterbatches for are used for HDPE and LDPE film, Injection and Blow Molding Applications and Sheet, Pipe, Profile Extrusion.

Gupotim WP is a filler mixture that is both thermally and electrically conductive.

KP-8550 is a Higher flow for easier dilution. It is used in PP injection molding and in PP extrusion.

KP-8150 is a Higher flow for easier dilution. It is used in PP injection molding and in PP extrusion.

Cromex PP-RF 10149 is used in extrusion.

Gupotim T 11 is an aluminum oxide-based thermally conductive and electrically insulating filler.

GEMATILEN® BK80 HD is 80% Calcium carbonate filled PE. It is an off-the-shelf compound filler masterbatch. It is from 50% to 80% Calcium Carbonate (Chalk, CaCO3) filled LLDPE based compound. The product has been engineered specifically for FILM and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% or 40% depending on the application.

Micro-FL-1014 C is an economical masterbatch based on Talc with LDPE carrier which contributes to extrusion process stability and improved output. It improves MD tear resistance and dart impact properties , retains light transmission levels and improves MD/TD shrinkage levels.

PALVBLK 730 are Very common grades used in FILMS, PIPES, CABLES, ROTOMOULDING & COMPOUNDING. These master batches are based on LDPE/LLDPE carrier resin in powder form & carbon grades of particle size 20-80 NM is used along with Process additives & stabilizers to get quality Product with High jet blackness & dispersion. These master batches are packed in moisture proof PE bags with liners. All master batches are Dust free & with low moisture content to give all round properties & performance during Processing.

PALVBLK 717 are Very common grades used in FILMS, PIPES, CABLES, ROTOMOULDING & COMPOUNDING. These master batches are based on LDPE/LLDPE carrier resin in powder form & carbon grades of particle size 20-80 NM is used along with Process additives & stabilizers to get quality Product with High jet blackness & dispersion. These master batches are packed in moisture proof PE bags with liners. All master batches are Dust free & with low moisture content to give all round properties & performance during Processing.

Carbon Graphite Materials Inc. E110 is a natural crystalline flake graphite.

Cromex PE-CG 13357 is used in blow molding, films, injection and thermoforming.

European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.

Polyfill Technologies Ultra Clear Natural is the very special masterbatch made from very superior grade of imported very fine Talc Powder most suitable for the lamination plants. The recommended rate of addition is 15 - 20 % with Polymer by weight. We recommend to Pre-heat the material before loading it to the plant for improved results. Apart from Lamination Plants, Ultra Clear can also be used as a functional filler in Vest Bags, Carry Bags, Jumbo Bags, Liners, and Box-Strapping Applications. For these applications one can achieve the loading upto 50% of PHR.

European Plastic Joint Stock Company HD Filler Masterbatch is made from CaCO3, PE carrier, and other additives. Exploiting from the hundreds of year old high-calcium limestones in Vietnam with ample resources, we produce the strong HD thermoplastic with the strong but remain light weight properties and cost effective solution for producing finish plastic products.

Gupotim T 21 is an aluminum oxide-based thermally conductive, electrically insulating filler.