Products in Flexography: Good Adhesion

127-11 is a medical electrode ink and coating suitable for application by wire coating, dipping and flexographic or gravure printing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike most readily available electrode inks, this product is able to maintain conductivity levels in contact with high salt content electrode adhesive gel. This product is designed to produce uniform smooth surfaces in thin layers and to be fast curing at low temperatures. Some uses for 127-11 include, but are not limited to, EKG and Tens electrode applications as well as other medical devices.Features Electrode ink for ECG electrodes

115-02 is a silver/ silver chloride, based electrically conductive ink and coating suitable for application by flexographic and rotogravure printing methods. This product features excellent adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 115-02 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments, medical electrodes and static elimination. 115-02 is a silver / silver chloride version of 114-50.Features Electrode ink for ECG electrodes

110-04 is a carbon-based electrically conductive ink and coating suitable for application by flexographic and rotogravure printing methods. This product features excellent adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for110-04 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, resistance heaters, polymer thick film circuitry, membrane switches, electrical attachments and static elimination.Features Solvent based resistive ink

124-02 is a waterborne, low V.O.C., electrically conductive ink and coating suitable for application by rotogravure or flexographic. This product features adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 124-02 include, but are not limited to, medical electrodes, EMI/RFI shielding, polymer thick film circuitry and membrane switches. 124-02 is a higher viscosity version of 119-32.Features Water based conductive ink

110-03 is a silver-based electrically conductive ink and coating suitable for application by flexographic and rotogravure printing methods. This product features excellent adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 110-03 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments and static elimination.Features Solvent based conductive ink

124-43 is a carbon filled waterborne, low V.O.C., electrically conductive ink and coating, suitable for application by flexographic methods. This product features adhesion to Kapton, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 124-43 include, but are not limited to, medical electrodes, polymer thick film circuitry, and membrane switches and static elimination.Features Water based resistive ink

125-28 is a silver-based electrically conductive ink and coating suitable for application by flexographic and rotogravure printing methods. This product features excellent adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. This product is easily removed from the cells in your annilox roller during cleanup. Some applications for 125-28 include, but are not limited to, Smart Labels/ RFID, EMI/RFI shielding, polymer thick film circuits and other electronic circuitry.Features Conductive ink for high speed printing processes.

Polytex Soft Touch Coating are designed for creating a luxurious feel to a variety of surfaces. Ideal for gravure or Flexo printing. The products have good adhesion and abrasion resistance on paper or films.

ORAFLEX® Cushion 11522 is specially designed for very fine lines, headlines and process printing with minimum point gain and suitable for very fine screen counting.

PureWhite® HIGH OPACITY white is formulated to save printers time and money, replicates the opacity and density traditionally achieved through screen printing, eliminating the need for two hits of white, with fast cure and superb adhesion, this opaque white ink offers the highest opacity and density in our PureWhite range and, with reduced ink consumption and increased production efficiencies, it’s easy to see why this product is so popular with many of our narrow web customers worldwide.

ORAFLEX® Cushion 11554 is specially designed for very fine lines, halftones and process printing with solid and screen combination.

Kao Chimigraf Vinigraf EC Vinigraf EC is designed specifically for printing on PVC self-adhesive seals. It is distinguished by its ease of use and excellent adhesion without the use of Primer, Release, or additives. Vinigraf EC provides excellent chemical and abrasion resistance.

ORAFLEX® Cushion 11523 is specially designed for very fine lines, headlines and process printing with minimum point gain and suitable for very fine screen counting.

Alden & Ott Printing Ink Company Multi-Grip Film Ink is designed for the narrow web printer where quick turnaround and ink inventory reduction are a driving force.

Alden & Ott Printing Ink Company G-Force Film Inks is a film ink system that runs more like paper ink with good re-wet ability on screens, small type, and solids. The inks can be used on *film, foil, and paper allowing the printer to maintain quick turnaround while reducing their inventory. G-Force inks are formulated to have adhesion and scratch on a wide variety of corona-treated or top-coated films and foils. The inks are virtually maintenance-free eliminating common issues of film inks such as drying too fast or too much additive being added to them causing the job to block or offset. G-Force inks maintain pH and viscosity stability both on and off the press.

Kao Chimigraf Flexo 100 EC Flexo 100 EC is a special two-component series for printing treated and untreated polypropylene tape with a corona machine and water-based acrylic adhesive paste. It's known for its excellent adhesion to the medium, as well as its quick drying and high gloss. The Flexo 100 EC ink series must be mixed with Additive C-200 before use.

Flex Series™ ML20 Ultra High Adhesion has a medium low density feature for use with primary image high line screen, in combination with fine dot and solid type flexographic printing. Flex Series™ ML20 Ultra High Adhesion is a double-sided poly foam with standard thickness.

ORAFLEX® Cushion 11585 is especially suitable for solids and lines. It is used in dense ink coverage, no cratering.

ORAFLEX® Cushion 11526 is specially designed for very fine lines, headlines and process printing with minimum point gain and suitable for very fine screen counting.

ORAFLEX® Cushion 11582 is especially suitable for solids and lines. It is used in dense ink coverage, no cratering.

PurePureWhite® HIGH ADHESION opaque white has been formulated to address this very issue and is considered by many to be a real problem-solving product offering superb adhesion without compromising on opacity. This product can also remove the need for a primer, freeing up a unit and saving cost for the converter. With excellent overprintability, our high adhesion opaque white, also suitable for ‘first down’ applications, provides superior adhesion to a range of tricky substrates, with high opacity, fast cure and smooth lay.

ORAFLEX® Cushion 11553 is specially designed for very fine lines, halftones and process printing with solid and screen combination.

Alden & Ott Printing Ink Company Temp-o-grip Heat Resistant Inks are best suited on film substrates that require heat resistance up to 425°F.

Alden & Ott Printing Ink Company G-Verse Multipurpose Paper Systems is a paper ink system that can be used on a wide range of substrates from coated and uncoated paper to *polyester films. The inks are designed to eliminate needing different ink systems for every substrate causing excessive inventory. G-Verse inks have good water resistance, adhesion and rub resistance on most treated or top-coated materials in the narrow web market today. The inks perform well on solids, screens, and small text with high line anilox rolls with doctor blades. G-Verse inks can be top-coated for imprintability with various types of printers.

Mirage Inks MIRATAPE is designed for the printing of vinyl tapes, rigid and plasticized vinyl mainly using the flexographic process. The inks give fast solvent release and have a high resistance to migration into vinyl films.

Flex Series™ ML15T High Adhesion has a medium low density feature for use with primary image high line screen, in combination with fine dot and solid type flexographic printing. Flex Series™ ML15 High Adhesion is a double-sided poly foam with standard thickness.

ORAFLEX® Cushion 11556 is specially designed for very fine lines, halftones and process printing with solid and screen combination.

Mirage Inks PROPATAPE is a range of flexographic inks formulated for the printing of polypropylene tapes. The inks, as supplied, are toluene free.

Pro Colorflex Ink Corporation UV FLEXO SUPERNOVA WHITE has been developed primarily as a UV flexo basecoat white to enable the high production speeds associated with the flexo process to be maintained without compromising the high opacity needed when printing clear film substrates. Supernova white prints exceptionally well as a backing white using high volume anilox cell volumes. It is also an exceptional white for printing fine and reverse text when used with smaller anilox roll volumes. Contact Pro ColorFlex for advice on optimum anilox roll specification and print conditions. The use of high volume anilox rolls will lead to the need for frequent manual ink replenishment on most narrow web presses where ink pumping systems are not in use. Pumping systems can be employed to improve efficiencies, but it is important that if Supernova White is stored in bulk containers, air-circulation option is available to keep the ink homogenous.

ORAFLEX® Cushion 11555 is specially designed for very fine lines, halftones and process printing with solid and screen combination.

PureWhite® Shrink Sleeve White ink formulation plays an important role in the printing of shrink sleeve labels and, as well as COF, high resistance properties play a part in ensuring that the film does not scuff or scratch easily. Much like other inks, opaque whites must also have good adhesion and be able to withstand the shrinking process.

ORAFLEX® Cushion 11584 is especially suitable for solids and lines. It is used in dense ink coverage, no cratering.

ORAFLEX® Cushion 11525 is specially designed for very fine lines, headlines and process printing with minimum point gain and suitable for very fine screen counting.

Myprint Films is a water based ink system designed to print on common films such as CPP, BOPP, PE, PET and more. This system will provide you the ability to print fast and get excellent printing results and good adhesion.

ORAFLEX® Cushion 11552 is specially designed for very fine lines, halftones and process printing with solid and screen combination.

ORAFLEX® Cushion 11583 is especially suitable for solids and lines. It is used in dense ink coverage, no cratering.