Products in Flexible Packaging Adhesives: Chemical Resistant

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

FluoroGrip® F (HD-FEP) Teflon® is made from high molecular weight resin for applications where chemical resistance, high flex life and stress-crack-resistant performance are required.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

FluoroGrip® -P- PTFE is an oxy-fluoropolymer of polytetrafluoroethylene modified to incorporate hydroxyl groups with an acrylic or silicone pressure sensitive adhesive.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

FluoroGrip® -E- ECTFE is an oxy-halopolymer of ethylene-chlorotrifluorethylene modified to incorporate hydroxyl groups with an acrylic or silicone pressure sensitive adhesive.

ECOPOWER HC9130 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic polymerization technique. C9 petroleum resin HC9130 with the molecular weight is among 300-3000. Generally speaking, this kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier. HC9130 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

ECOPOWER C9 HC9140 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique.

HC9110 is cold polymerization resin with good solubility and adhesive, improve the strength and aging resistance of the rubber, waterproof, alkali resistance to widely use in painting, ink industry.

ECOPOWER C9 HC-9150 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic polymerization technique. HC9150 is a transparent granular solid with the color of light yellow. HC9150 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

C9 HC9120 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin. Cold polymerized petroleum resin HC9120 is prepared by low temperature catalytic polymerization of C9 fraction,which is a byproduct of ethylene plant. HC9120 is yellow granular solid, transparent and glossy, with good solubility, mutual solubility, water resistance, insulation, excellent chemical stability to acid and alkali, good adhesion and low thermal conductivity.