Products in Other Tapes, Labels & Adhesives: Hydrocarbons

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

Puyang United Chemical C5 Petroleum Resin Q-1320 is 100% C5 Aliphatic hydrocarbon resin. The key feature of Q-1320 is high softening point and odorless. Q-1320 can replace some of terpene resin to save cost in adhesive production. Q-1320 is tackifying resin designed to provide high temperature performance and cohesive strength with a variety of adhesive polymers including metallocene polyolefins, APP, APAO, SIS block copolymers, natural rubber, synthetic polyisoprene, polyisobutylene and Butyl rubber. For APO & APAO base HMA, Q-1320 recommend for carpet layer adhesive, book binding adhesive, mattress bonding adhesive, wood working adhesive, automobile interiors adhesive, mouse trap adhesive, glass sealant and electrical adhesive tape etc.

c9 petroleum resin PR1-120 is a by-product of petroleum cracking C9 fraction. It is a resin produced by pretreatment, polymerization, distillation and other processes. It is not a high polymer, but an oligomer with a molecular weight of 300-3000. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance, chemical stability to acid and alkali, and good viscosity adjustment and thermal stability. C9 petroleum resin is generally not used alone, but as an accelerator, regulator, modifier and other resins.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L120 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Bitoner Resin C-2120 include C5 modified C9 resin and C9 modified C5 resin.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L130 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

c9 petroleum resin PR1-140 is a by-product of petroleum cracking C9 fraction. It is a resin produced by pretreatment, polymerization, distillation and other processes. It is not a high polymer, but an oligomer with a molecular weight of 300-3000. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance, chemical stability to acid and alkali, and good viscosity adjustment and thermal stability. C9 petroleum resin is generally not used alone, but as an accelerator, regulator, modifier and other resins.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L140 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Bitoner Resin C-2145 include C5 modified C9 resin and C9 modified C5 resin.

Bitoner Resin BT-2110 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Bitoner Resin TR-100 include C5 modified C9 resin and C9 modified C5 resin.

V-TAC™ 7901 dispersion is an aqueous, 53% solids, solvent-free anionic hybrid dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, polychloroprene and natural rubber. V-TAC™ 7901 enhances adhesion and is especially recommended for acrylic latex systems. V-TAC™ 7901 offers an excellent balance of adhesion for polyolefin substrates and recycled corrugated.

Bitoner Resin BT-1115 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Bitoner Resin C-2130 include C5 modified C9 resin and C9 modified C5 resin.

LESTAC TM100 is terprene modified pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated aliphatic 1,3-pentadiene (1,3-piperlene) and some monomers derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for rubber compound, tire, etc.

c9 petroleum resin PR1-90 is a by-product of petroleum cracking C9 fraction. It is a resin produced by pretreatment, polymerization, distillation and other processes. It is not a high polymer, but an oligomer with a molecular weight of 300-3000. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance, chemical stability to acid and alkali, and good viscosity adjustment and thermal stability. C9 petroleum resin is generally not used alone, but as an accelerator, regulator, modifier and other resins.

c9 petroleum resin PR1-130 is a by-product of petroleum cracking C9 fraction. It is a resin produced by pretreatment, polymerization, distillation and other processes. It is not a high polymer, but an oligomer with a molecular weight of 300-3000. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance, chemical stability to acid and alkali, and good viscosity adjustment and thermal stability. C9 petroleum resin is generally not used alone, but as an accelerator, regulator, modifier and other resins.

c9 petroleum resin PR1-110 is a by-product of petroleum cracking C9 fraction. It is a resin produced by pretreatment, polymerization, distillation and other processes. It is not a high polymer, but an oligomer with a molecular weight of 300-3000. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance, chemical stability to acid and alkali, and good viscosity adjustment and thermal stability. C9 petroleum resin is generally not used alone, but as an accelerator, regulator, modifier and other resins.

Bitoner Resin BT-2104 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

c9 petroleum resin PR1-100 is a by-product of petroleum cracking C9 fraction. It is a resin produced by pretreatment, polymerization, distillation and other processes. It is not a high polymer, but an oligomer with a molecular weight of 300-3000. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance, chemical stability to acid and alkali, and good viscosity adjustment and thermal stability. C9 petroleum resin is generally not used alone, but as an accelerator, regulator, modifier and other resins.