Products in Additives: Waterborne Adhesive

West Tech Chemical Ltd WT 840 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

Aquadhes® 6101 is a a water-based rosin acid dispersion and solvent free.

AQUATAC E 6180 resin dispersion is an alkyl phenol free rosin ester dispersion designed for high-performance waterborne pressure sensitive adhesives using the latest in surfactant technologies. It was developed for use in label and tape applications requiring an excellent balance of loop, shear, and peel properties while maintaining mechanical stability when used on high mechanical shear adhesive coating processes.

Omnirad BMS is a highly effective Type II photoinitiator used to initiate radical polymerization of unsaturated monomers and oligomers e.g. acrylates after exposure to UV light

Glyplast TEPG are high performance additives excellent alternative to phthalates, their low toxicity and aqueous dispersibility render these products particularly suitable in vinyl-acrylic emulsions for paper and wood waterborne adhesives. They increase viscosity and open-time, and thanks to their hydrophilic characteristics work such as emulsifiers, providing homogeneity between water and organic phases so increasing viscosity, flexibility and adhesion. Moreover, they comply the FDA legislation CFR 21:175 Adhesives.

Vitro Minerals LA-400 are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

Esacure KIP IT is a liquid mixture of Esacure KIP 150 (65% ) and Propoxylated glycerol triacrylate (35%). It is by high reactivity and non-yellowing properties. It is particularly recommended when low odor and low yellowing are required characteristics

Akuacure 4002B is a Water-dispersible Blocked Isocyanate used as 1K Baking system Adhesive, Paint and coating.

AGITAN 351 is a special composition with excellent stability and high efficiency. AGITAN 351 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

Micronized Products Mica 60# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

EDAPLAN LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

Afcona 3035 is additive to improves leveling and prevents surface defects in upe and epoxy systems. the slip of this product is minimal.

EDAPLAN LA 451 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 451 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

Beijing Mayor Chemical HY-1040A possesses excellent heat resistance performance and water dispersibility. with light color will not produce fish eyes or craters. not appear oil slick or demulsification phenomenon. suitable for coatings, emulsions,adhesive system.

Dalian Bio-Chem CMIT/MIT -1.5F is suitable for wet corrosion of the aqueous products, can be used to protect the paint, polymer emulsions, adhesives, enamels, fillers, sealants and other water based products against harmful microbiological contamination, it can also be used diluted metal cutting fluid additive.

Omnirad 4MBZ Flakes is an effective Type II photoinitiator used, in combination with tertiary amine synergists, to initiate radical polymerization of unsaturated oligomers e.g. acrylates after exposure to UV light.

In aqueous systems, such as emulsion paints and plasters, the use of Deuteron XG prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is compatible with most binders and thickeners which are customary in the paint industry.Deuteron XG is insoluble in most organic liquids. The product is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. Pre-wetting of Deuteron XG with glycols at a ratio of 1 : 1 accelerates the swelling- and dissolution process. Aqueous solutions of Deuteron XG show a high pseudoplasticity. High rate of shear lowers the viscosity. Reducing the shear rate increases viscosity again. Solutions of Deuteron XG are stable regarding the pH-value and temperature. There is almost no change in stability from pH 2 – 12. The temperature hardly has any influence on the viscosity of a preparation with Deuteron XG.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back

TAFIGEL PUR 44 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 44 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 44 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

AFEX™ CN30C is a base drying oil called as Canola having no double bond.

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

PL-200 is an effective hydrophilic fumed silica providing excellent gloss and rheology control in inks, coatings, adhesives gel coats and resins.

CURING AGENT X7 is polyfunctional aziridine, employed as crosslinking agent and adhesion promoter. It is a clear, amber liquid, miscible in water and many common organic solvents. Aziridine content is 6,35-7 meq/g

TAFIGEL PUR 80 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 80 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 80 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 80 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

AQUATAC 6085 resin dispersion is an unique rosin ester dispersion for use in waterborne pressure sensitive adhesives. Formulations with AQUATAC 6085 will have aggressive tack and peel, as well as excellent shear properties.

TERGUM 42 is a liquid rosin triethylglycol ester, to be added to water based adhesive or to hot-melt formulations in order to increase tack properties.

METOLAT® 367 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and leveling. METOLAT® 367 is specifically suitable for systems in contact with food. The product is VOC free according to 2004/42/EC.