Products in Additives: Hot Melt Adhesive

SCG Chemicals LP1100P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP11IOOP is guaranteed its high quality for various applications.

Komo Chemical KB100S resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

Michem® Lube 124 - A wax emulsion provides release and acts as a detackifier for industrial molding applications and latex glove formulations, and offers slip resistance for adhesives and sealants.

Fintac 2331 is a modified rosin which offers an excellent combination of oxidation and crystallization resistance. This product functions as a tackifier for SBR, natural rubber, butyl rubber, ethylene-vinyl acetate and other polymers. It can be delivered in flaked and solid forms. Formulated in solvent-based and water-based adhesives, it exhibits no tendency to crystallize. It meets the requirements of the Code of Federal Regulations, Title 21, under the following section: 175.105 Adhesives; 176.210 Defoaming Agents Used in the Manufacture of Paper and Paperboard; 177.2600 Rubber Articles Intended for Repeated Use.

RELEASE W 40 S2 is a water-based release agent based on synthetic polymers.

Kolon Industries HIKOTACK® P-120 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

Mangalam Organics Limited TERPENE PHENOLIC RESIN DRT-70 are thermoplastic polymers manufactured by copolymerization of terpene hydrocarbons and phenol.

Silquest™ A-Link 597 silane functions as an adhesion promoter for a variety of substrate/matrix resin combinations. It is especially useful in high performance hot melt adhesives and other applications where exposure to sustained temperatures might occur.

LESTAC P140 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Puyang United Chemical C5 Petroleum Resin O-1102 is pure C5 aliphatic hydrocarbon resin. It's designed for Solvent based pressure sensitive adhesive (SBPSA), especially for NR and lIR SBPSA. 0-1102 has lower crystallinity which can brings adhesive good flexibility and creep resistance. So it works as a good tackifier for packing ad hesive, carton sealing, shoes adhesive and mouse trap glue etc. 0-02 lower molecular weight distribution and good color make it can works in SIS based HMPSA. It also can replace part of hydrogenated hydrocarbon resin when production APAO and EVA hot melt adhesive. The lower crystallinity of O-1102 makes it can works as tackifier and softener for tire rubber etc rubber parts production.

RELEASE WP 3527 is a water borne release agent, based on synthetic polymers compounded with hydrophobic and releasing agents.

Kolon Industries SUKOREZ® SU-525 is white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-525 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Water-borne emulsion of polyethylene wax DEUREX® E 11 K

SYLVARES TP 2040 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.

TRECORA POLYETHYLENE WAX – CWP500 E is a High Density Polyethylene Wax intended for use in hot melt adhesive applications to reduce viscosity and control open and set times.

Fischer Tropsch wax

King Honor International KH Paraffin Wax 67H is made from the deep refinement. Comparing the general fully refined paraffin wax, it has the more narrow carbon distribution. There is a more linear structure. That endows it with many good characteristics while using in the high-grade hot melt adhesives. It has the fast setting time, good cohesive strength and has good compatibility with the major groups of polymers. This grade is specially produced for the customer who uses it in the hot melt for packages. And we could help the customer with a slight adjustment to fulfill their own production process.

Non polar, low molecular Polyethylene wax

Rit-Chem BT95 is alpha and beta pinene polyterpene resin. Used in hot melt and solvent-based pressure sensitive adhesive applications.

Non-polar, low molecular Polyethylene wax

Asahi Kasei Tuftec™ H1521 is particularly designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes H1521 super-finely dispersed into PP. PP and H1521 blends provides transparent and flexible extruded products such as sheets, films and tubes. The blends are also applicable to injection molding due to its high MFR. It has excellent adhesion, which is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1521 meets USP Class Ⅵ standards. It may be used for medical applications after a special agreement with Asahi Kasei.

SCG Chemicals WD2040P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

TRECORA POLYETHYLENE WAX – CHU561 is a High Density Polyethylene Wax suitable for use in general purpose Hot melt adhesives to reduce viscosity and control open and set time. It can be used in applications where penetration is not of paramount importance.

RELEASE K 20 DL is a release agent dissolved in toluene.

Kolon Industries HIKOTACK® P-90S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

SYLVARES TP 2040HM tackifier is a high softening point thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

BONDiT™ C-6 is an all-around general purpose, one-part primer, adhesion promoter and adhesive with moderate chemical resistance for metals, glass & ceramics, thermoplastics and thermoset polymers. BONDiT™ C-6 offers a wide range of capabilities for promoting single coat chemical bonding between coatings, sealants and adhesives of very diverse properties to mineral and polymer substrates. It is used as a primer coat for other BONDiT™ coatings and encapsulants.

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

C5 /C9 copolymer resin PR1-140 is a kind of thermoplastic resin produced by pre-treatment, polymerization, distillation and other processes from the C5 and C9 fractions by-produced by petroleum cracking. It is not a high polymer, but a molecular weight between 300- 3000 oligomers. It has the advantages of C5 petroleum resin and C9 petroleum resin. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance. It is chemically stable to acid and alkali, and has the characteristics of good viscosity adjustment and thermal stability. Since the structure does not contain polar groups, it has good water resistance, acid and alkali resistance, weather resistance and light aging resistance. It has good solubility in organic solvents, especially in petroleum solvents, similar to other resins. The compatibility is very good, and it also has brittleness, viscosity increasing, cohesiveness and plasticity. It is generally not used alone, but as an accelerator, regulator, modifier and other resins.

Kolon Industries SUKOREZ® SU-401 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-401 is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins.

SCG Chemicals LP1040P is a refined polyethylene homopolymer wax which is derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40P is guaranteed its high quality for various applications.

Winlex 4270 is a liquid rosin ester. It is designed for applications requiring low odor and high tack. It has a suitable FDA status for use in food packaging applications covered by 175.105.

Rit-Chem BT105 is alpha and beta pinene polyterpene resin. Used in hot melt and solvent-based pressure sensitive adhesive applications.