Products in Additives: Binder & Resin

Loxanol® OT 5846 acts as an open-time prolonger, providing excellent open time for latex-based decorative masonry finishes. This pumpable additive is easy to handle and offers high effectiveness based on a linear fatty alcohol dispersion. It provides elastification, preventing cracks in plasters.

XIAMETER(TM) PMX-200 Silicone Fluid 20cSt is a polydimethylsiloxane fluid commonly used as a base fluid in personal care products due to its excellent spreading characteristics. It is clear, tasteless, essentially odorless, and non-greasy. Commercial bulk-polymerized dimethyl silicone fluids, such as XIAMETER(TM) PMX-200 Silicone Fluid 20cSt, typically contain trace amounts of impurities.

GENIOSIL® XL 70 is a clear, colorless liquid known as an alkoxyarylsilane. When exposed to moisture, it undergoes hydrolysis, leading to the formation of silanols and the release of methanol. These silanols can further react to form siloxanes. GENIOSIL® XL 70 finds applications in building & construction adhesives and flooring installation.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

VINNAPAS® eco EAF 67 is an aqueous polymer dispersion, free of plasticizers, produced from vinyl acetate, ethylene, and acrylate monomers. This dispersion serves as a pressure-sensitive adhesive, exhibiting excellent cohesion and adhesion properties that remain effective even at elevated temperatures. The production of VINNAPAS® eco EAF 67 utilizes APEO-free surface active agents.

Dynasylan® SIVO 110 stands as a versatile, virtually VOC-free, water-borne sol-gel system. It integrates organofunctional silanes with nanoscale SiO2 particles. This product, available as an opaque to milky, colorless to slightly yellow, low-viscosity liquid, can be diluted in water and common organic solvents. Dynasylan® SIVO 110 features reactive silanol groups and Si-bonded epoxy-based organic functionalities.

Dynasylan® SILBOND® Condensed serves as a raw material composed of tetraethyl orthosilicate (TEOS; Si[OEt]4 ). This substance is utilized for acid- or alkali-catalyzed hydrolysis and subsequent condensation reactions, commonly known as the sol-gel process. The rate of gelation is influenced by the concentration of water and the pH.

Dynasylan® SIVO 160 presents a water-borne, storage-stable silane-based sol-gel system engineered for formulating inorganic surface treatment primers. A part of the SIVO® SOL Technology, it inherits the benefits of its established series counterparts by excluding heavy metals, fluorides, and solvents. Designed for minimal volatile organic content, its polymeric nature endows it with high reactivity. This is highlighted by its remarkably low curing temperature range of 20 to 80 °C, a significant advancement for water-borne sol-gel systems. Dynasylan® SIVO 160, appearing as a clear to slightly opaque, colorless to slightly yellow, low-viscosity liquid, offers versatile utility.

Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasting a silica content ranging from 32.5 to 33.5% (as SiO2 ). This silica content arises from a blend of TEOS-derived silica and other components. This formulation is tailored for use in two-component inorganic zinc-rich primers. The product brings forth enhanced toughness and exceptional performance in high-temperature scenarios. The heightened toughness results directly from the increased silica content in contrast to an ethyl polysilicate binder.

Dynasylan® SILBOND® 40 is an ethyl polysilicate, emerges from partial hydrolysis of tetraethyl orthosilicate (TEOS). This transformation converts ethoxy groups into hydroxyl groups, generating silanols. Subsequent condensation of silanols engenders siloxane bonds (-Si-O-Si-O-) and prompts eventual gelation. Often deployed as an intermediary, Dynasylan® SILBOND® 40 undergoes further hydrolysis to produce a binder suitable for diverse applications. These include inorganic zinc-rich primers, investment casting molds, ceramic shapes, coatings, and thermal insulation.

Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasts a silica content ranging from 32.7% to 34.0% (as SiO2). Formulated for two-component inorganic zinc-rich primers, this material brings about improved toughness and exceptional performance in high-temperature applications. The elevated SiO2 content directly contributes to its enhanced toughness.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACARNA™ 30M is a copolymer of α-olefin and maleic anhydride. Applications include as a compounding additive for filler dispersant and adhesion promoter for PA/GF composites.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Paygel® 290 - Pregelatinized Wheat Starch is a highly refined, precooked, food-grade wheat starch that is pregelatinized. It is used in both food and industrial applications as a binding agent and to increase viscosity. Paygel® 290 forms stable gels with ten parts of water and retains its characteristics through normal processing.

Bermocoll EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll EBM 5500 is a high viscosity grade of methyl ethyl hydroxyethyl cellulose.

Bermocoll EM 7000 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll Prime 3500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

Bermocoll Prime 1500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

Bermocoll Prime 2500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance, and superior color stability. It improves the consistency, the stability, and the water retention of water-based paints.

Bermocoll EHM Extra is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Bermocoll Prime 1000 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints. Bermocoll EBM 10 000 is a low viscosity grade of methyl ethylhydroxyethyl cellulose.

VINNAPAS® EAF 68 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 68 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 68 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 68 may additionally be used as an adhesion promoter in adhesive formulations.

VINNAPAS® EAF 67 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 67 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 67 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 67 may additionally be used as an adhesion promoter in adhesive formulations.

GENIOSIL® XM 25 represents a new line of silane terminated polymers that serve as reactive diluents in moisture-curing formulations. This technology encompasses the renowned Wacker portfolio. GENIOSIL® XM 25 falls under the category of gamma chemistry. It finds application in building and construction adhesives.

GENIOSIL® XM 20 represents a new line of silane terminated polymers that serve as reactive diluents in moisture-curing formulations. This technology encompasses the renowned Wacker portfolio. GENIOSIL® XM 20 falls under the category of alpha chemistry. It finds application in building and construction adhesives.

VINNAPAS® 822 HD is a dispersion with excellent hydrophobic properties combined with very low flammability. VINNAPAS® 822 HD can be used as a binder for coating systems containing an opacifying pigment, such as polymer-modified plasters. VINNAPAS® 822 HD is a dispersion of a vinyl chloride, ethylene, and vinyl ester terpolymer.

Dragonpovol Polyvinyl Alcohol (30-99 Grade) is a normal band of the PVA family, which can generally be used in textile sizing material, adhesives & glues, coatings, emulsifiers, soil modifying agents, etc.

Gelest BIS[(3-METHYLDIMETHOXYSILYL)PROPYL]POLYPROPYLENE OXIDE (SIB1660.0) is a dual-functional polypropylene glycol. This product functions as an adhesion promoter, binder and resin, and coupling agent.

DeCAL 4286 is a low molecular weight carboxylated acrylic copolymer with the capacity to carry very high levels of pigment and to provide maximum color development properties at these loadings. To obtain the full benefits of DeCAL 4286, it is essential to use the highest possible pigment binder ratios and the highest possible pigment loading.

DeCAL 4288 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment, providing maximum color development properties at these loadings. To obtain the full benefits, it's essential to use the highest possible pigment binder ratios and the highest possible pigment loading of DeCAL 4288. It's common to prepare a neutralized solution using either ammonia or monoethanolamine in formulations where slower drying or better resolubility is required.

DeCAL 4287 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment and provide maximum color development properties at these loadings. It is the same polymer as DeCAL 4286 but is supplied as the monoethanolamine salt for use in formulations where slower drying or better resolubility is required.

Dar-Tech Hauthane HD-2313 is a co-solvent-free, flame-retardant, aliphatic, aqueous polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This one-of-a-kind urethane dispersion is produced at high solids without the use of a solvent.