Products in Additives: Leveling Agent

PAT-ADD LE 1065 is used as a most efficient leveling agent in solvent-borne systems, notably for UPR and PUR systems

Pat-Add SU4 is a series of unique nonionic surface active agents, which provide both wetting and defoaming in the same product. Due to the multifunctional properties, PAT-ADD SU 4 series provides performance benefits in many applications areas, such as paints, inks, adhesives and various other chemical formulations.The PAT-ADD SU 4 series is composed of products, all based on same active material but formulated in different solvent compositions. The active material is designed as PAT-ADD SU 4.

Anti-crater, substrate wetting and leveling agent for solvent-based coatings

Afcona 3750 is a silicone based leveling and anti-crater agent for aqueous coatings without influent of inter coating adhesion.

Afcona 3581 is a silicone based leveling and anti-crater agent for aqueous coatings without influent of inter coating adhesion.

Defoamer for water-based and solvent borne coating systems, silicone free. SCHWEGO foam 6375 shows good defoaming action in solvent borne coating systems: NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems, SCHWEGO foam 6375 has very good defoaming effect in water-based coating systems based on the following binders: Long oil alkyds, Medium oil alkyds, Acrylate/medium oil alkyds, Acrylate/long oil alkyds, Epoxides.

BERKIM Zinc Stearate is used in plastic, rubber, construction chemicals and paint industry. It is a strong mold release agent and hydrophobic. It is an outer slider.

941 LBA is a linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums.

Leveling agent FHT-F3030 contains mixture polyalkyl modified silicone and organic polymers.

Afcona 3778 is a leveling agent for solvent-based and solventfree coatings.

PAT-ADD LE 1433 is a flow and leveling additive for waterborne and polar solvent clears as well as pigmented formulations. PAT-ADD LE 1433 contributes to appealing film performances, even in coatings applied to low surface energy substrates; optimizing substrate wetting, deaeration, and crater resistance.

Rheological additive for water-based coating systems, VOC-, APEO- and organotin-free. SCHWEGO pur 8051 is free of organotin and is therefore especially recommended for the use in textile printing inks according to Oeko-Tex® Standard 100. SCHWEGO pur 8051 is suitable for interior and exterior wall paints, water-based coatings and anticorrosive coatings, modified resin plasters and fillers based on polyacrylates, styrene copolymers or PU-dispersions. SCHWEGO pur 8051 shows a high gloss retention in glossy emulsion paints compared to acrylic and cellulosic thickening additives.

AFCONA – 2524 is an effective water-based defoamer for PU and Acrylic based emulsions.

PAT-ADD LE 1040 is a leveling agent for use in waterborne and polar solvent-borne coatingsPAT-ADD LE 1040 is mainly used in industrial coatings.PAT-ADD LE 1040 enhances flow and leveling and provides slip and mar resistance optimisation.

Dynax DX4000 is a highly effective and efficient product, especially designed to provide rapid spreading, wetting and leveling performance to various water-based coating systems, such as paints, inks, floor polishes, etc., on low surface tension substrates that are difficult to wet out. DX4000 provides both superior dynamic and equilibrium surface tensions compared to conventional surfactants including fluorochemical and silicone surfactants: it quickly lowers the surface tension of aqueous solutions down to 16 dynes/cm at a very low concentration. DX4000 can be used without a defoaming agent because of its low foaming tendency

Chemguard S-764P-14A High Performance Anionic Fluorosurfactant is a short-chain, phosphate ester type fluorosurfactant. It is water-based and free from volatile organic compounds (VOC). It provides surface tensions as low as 18 dyn/cm in water at very low concentrations. Chemguard S-764P-14A imparts excellent wetting, spreading, leveling, anti-blocking, and flow control properties on various types of water-based coatings for architectural paints and stains, concrete coatings, industrial coatings, and hydrocarbon surfactant solutions. Chemguard S-764P-14A has excellent dynamic surface tension properties which allow for the rapid attainment of low equilibrium surface tensions. It is low foaming and can provide improved dirt pick-up resistance to exterior paints and interior low-gloss paints, sealers, and stains.

ADD-2722 is a silicone-based anti-foam and de-aeration agent for solvent-free coatings and composite. ADD-2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self leveling coatings can be produced. It acts as a leveling agent providing a smooth surface to the coating.

Polyflow No.50E is Leveling agent with good compatibility. Well-suited to clear paints.

CoatOSil™ 7001E silicone-polyether block copolymer can enhance the appearance of solvent-borne coatings, especially two-component acrylic-polyol isocyanate cured coatings. The addition of CoatOSil™ 7001E copolymer can improve the final cured coating’s distinctness of image (DOI), film clarity and film coalescence, and can also readily accommodate recoating.

Silok® 353-General Silicone Leveling Agent is general silicone rapid leveling agent and slipping agent with quick leveling, good smoothness and recoating.

Reacrone PCL-800 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

PAT-ADD SU 420 is a nonionic surface active agent, which provides excellent wetting and dispersing features in aqueous systems. Pat-Add SU 420 acts as a foam destabiliser. Due to the multifunctional properties the PAT-ADD SU 420 provides performance benefits in many applications areas, such as paints, inks, adhesives and various other chemical formulations.Pat-Add SU 420 is easy workable, solvent-free liquid. Main application areas are WB industrial paints, WB inks and adhesives.

Additive designed as croslinkable slip and leveling for UV coating

Afcona 3034 is additive designed to reduce the surface tension, improve the substrate wetting, anti-crater performance and leveling (especially vertical leveling).

Anti-crater, substrate wetting and leveling agent for solvent-based coatings

Reacrone PCL-850 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

Slip and leveling additive for water-based and UV-curing coating systems with wetting additive. SCHWEGO mar 6542 is mainly used in UV curing coating systems.

Deaerating additive for solvent borne, water-based and solvent free coating systems, silicone free. SCHWEGO foam 6351 is suitable for almost all solvent-based and solvent free coating systems. It is particularly effective in hammer tone finishes and structural coatings, reactive thick film systems, heavily pigmented coating systems and formulations, suitable for airless spraying. SCHWEGO foam 6351 is also effective in aqueous industrial finishes (alkyd/melamine systems).

Additive designed to perform the highest slip in all solvent based coating without foam stabilizing property

Dynamic International Ethylene Glycol Monomethyl Ether (EM) is mainly used as solvent for grease, nitrocellulose, synthetic resin, alcoholate dyestuff and vinylcellulose. In coating industry, it can be used as varnish dryer and coating diluent.

Reacrone PCL-420 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

HEXAFOR™ 641 is a high performance water soluble anionic fluorosurfactant. It is based on double short-chains containing 6 fluorinated carbon atoms, that cannot breakdown to PFOA in the environment.

PAT-ADD LE 1477 is flow and leveling additive for solvent-borne clear and pigmented coating formulations. PAT-ADD LE 1477 benefits coatings applied to low surface energy substrates, optimizing substrate wetting, deaeration, and preventing craters.

Dynoadd® F-200 is Flow and leveling additive for solvent borne coatings,Enhances flow and leveling Prevents surface defects, Effective foam control.

Puyang Ruicheng Chemical C5 resin for Hot Melt Road Marking Paint RC-R1105 is a kind of particle yellowish resin which is a polymer of low molecular weight. It is mainly generated from diolefins of five carbon atoms (such as pentadiene, isoprene etc.,) depend on the polymerization with the action of a certain temperature pressure and catalyst. In addition to excellent thermal stability and smooth leveling. The surface can enhance the paint’s toughness, hardness and adhesion ,and rosin resins and good miscibility. Can finish the formation of water resistance, UV resistance, chemical properties, and enhance the durability paint, paint to prevent aging.

Defoamer for water-based and UV-curing coatings, free of silicone. SCHWEGO foam 6360 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate.