Products in Additives: Powder Coating

Lu'An Jietonda New Material SA500 is a Slip and Degassing agent for powder coatings.Jietonda® SA500 is a micro wax based slip and degassing agent developed especially for powder coatings, which can be used as a slip promoter or a substitute of benzoin in various coating system.

Calcite RF 240# is the most common form of natural calcium carbonate. Calcium carbonate minerals are the most important and abundant of all sedimentary rocks. It occurs in crystalline form in white color. It is many times associated with varying proportion of Magnesium Carbonate.

Ultraflon FP-20 series represent premium, fluorinated ethylene-propylene powder (FEP) additives. FP-20 is characterized by comparatively lower molecular weight. It demonstrates the highest melt flow index (MFI) when compared to other grades within the Ultraflon FP series additives. FP-20 is manufactured from ultra-high purity FEP, and micronized in clean room conditions to preserve its pristine form.

The Datong Jinyu GB-CK96 series of Kaolin based pigments are produced through delamination,calcination and classification. The well-controlled processes ensure the GB series have no coarse particles and maintains an absolute minimum of 325 mesh residue, so the end user can achieve a high Hegman grind.

Micronized Fischer-Tropsch wax

PUVAB™ 6500 is a multi-functional additive for powder coating applications that provides ultimate smoothness.

Zetatalc EW 10 is made of pure lamellar talc. The crystals are macro crystalline in shape and processed in such a way so as to always retain this shape. This filler has an extremely high degree of whiteness and chemical purity. Zetatalc EW 10 renders these unique properties it possesses wherever it is applied

Nordkalk W635 is characterized by different particle sizes and low, medium or high aspect ratio (L/D). In addition, wollastonite products are available surface treated, e.g. in plastics to enhance dispersion in polymer resin. Due to its unique chemical composition, particle structure and high brightness, wollastonite offers many advantages for glazing and body formulations in ceramic applications. Wollastonite is used as a functional filler in paint & coating applications, where technical requirements are high.

Huangshan Huahui Technology Indoor Matting Agent HM3328 is a physical matting agent based on polymer resin, mainly used in epoxy/polyester system. It can achieve matting gloss as low as 6%. Compared with chemical reaction matting agent, HM3328 has better anti-yellowing and leveling properties bringing finer appearance.

Huangshan Huahui Technology Triglycidyl Isocyanurate (Powder Coating Grade) HT-708 is an isocyanurate based crystalline polyepoxide compound. It has good heat resistance, weather resistance, adhesion and high temperature stability..

Dog Chemie Homogenizers 501 is aromatic C9 hydrocarbon resins. C9 hydrocarbon resins are versatile in use and widely compatible with various polymers. Major application areas are hot melts, printing inks, paints and solvent based adhesives. Due to their aromatic structure, C9 hydrocarbon resins are more compatible with polar elastomers than a C5 resin.

Novinox®PAS is a corrosion inhibiting pigment suitable for a wide range of applications. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Novinox®PAS is suitable for a wide range of resins, both solvent and water based systems. Novinox®PAS is also an excellent alternative to Strontium chromate in coil coatings.

Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water.Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. back

Anhui Kingcham Chemical Technology KC9500 is a synthetic microcrystalline wax.This product has good foaming degassing effects and yellowing resistance. It is a defoamer that have a high performance, Also it is used as a substituendum of benzoin, and it is used in powder coatings to improve surface defects such as eliminate shrinkage and yellowing, also it applies to porous surfaces of the casting iron and other multihole surface degassing.

Deocoat 3412 is fine particle size, surface treated precipitated silica. They are effective matting agents for pigmented as well as non-pigmented systems. Easy dispersion and effective properties over a wide field of application makes them particular suitable as general-purpose matting agents.

Microblanc X-treme is a extremely white and fine crystalline CaCO3 with pigmentary properties. Due to its particle size distribution, formulators are able to reduce TiO2 significantly, retaining the whiteness, gloss and opacity levels. In colored systems the shades of colors are brilliant due to the very low yellowness value.

Anhui Kingcham Chemical Technology KC961 is a modified micronized wax, the porous substrate of the coating can be achieved very good results. It enables the release of air bubbles in the substrate easily detached, and generate the coating surface without air bubbles, especially for cast iron, galvanized and aluminum substrates , and it has a very good degassing effect. It can be replaced BYK chemical CERAFLOUR® 961. It is suitable for polyester / hydroxyalkylamide, polyester / TGIC, polyester / epoxy, acrylic, and other powder coatings.

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Ultraflon MP-30 is a granular-based PTFE powder additive, and is characterized by its proven versatility in a broad spectrum of applications. It an average particle size of 5 microns, and is exhibits a very narrow spread about the mean. As a result, it demonstrates unparalleled uniformity and repeatability in performance. Laurel's exacting manufacturing process ensures that the molecular weight of MP-30 is extremely resulting in unsurpassed consistency in performance.

Hubercarb® Q6 is a fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, adhesives, caulks, plastics, and construction building products.

Huangshan Huahui Technology N,N,N’,N’-Tetrakis (β-hydroxyethy) Adipamide HH8080 is a tetra-functional group containing N,N,N',N'-Tetrakis (B-hydroxyethy) adipamide (HAA). It is suitable for curing with carboxyl-terminated polyester or acrylic resin to produce exterior durable powder coatings with excellent mechanical properties and good weather durability. In comparison with TGIC, it's non-toxic, and can be used to produce non skin irritant and safe outdoor powder coating.

Fascat® 9100 is an extremely pure butystannoic acid offering industry leading, often undetectable, levels of DBT and TBT species.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

IMI Fabi CHD05 is used as Top coats - General industry Wood Varnish.

CERETAN® MC 6015 is a spherical, micronized Carnauba wax (type 1). This product have application in: 1) Paints and coatings e.g. powder-, can-, car-, industrial-, building-, furniture- and floor coatings, UV systems 2) Printing inks e.g. overprint-, screen-, flexo-, offset- and intaglio inks. CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Micronized Polyethylene wax

CERALENE® 2E is a low density polyethylene wax with a typical average molecular weight of 3000 MW.

FINE-CLAD® A551H is a flow promoter masterbatch. It contains about 15% of an active substance in a hydroxylated polyester.

Fine powder polyolefin wax, coated with micro-sized PTFE (Eco coated)

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

FASCAT® 4100 is a amorphous white solid with several esterification uses. It is an extremely pure butylstannoic acid, offering industry leading low levels of dibutyltin and tributyltin species.

Micronized Ethylene-Bis-Steramid wax (EBS)

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

Huangshan Huahui Technology Low Temperature Fast Curing Agent HC31 is a substance with chemical structure of cyclic amidine. It can be applied to Epoxy powder coating as a hardener and also to Hybrid coating as an accelerant..

Nordkalk Wicroll 40 is characterized by different particle sizes and low, medium or high aspect ratio (L/D). In addition, wollastonite products are available surface treated, e.g. in plastics to enhance dispersion in polymer resin. Due to its unique chemical composition, particle structure and high brightness, wollastonite offers many advantages for glazing and body formulations in ceramic applications. Wollastonite is used as a functional filler in paint & coating applications, where technical requirements are high.

Esacure ONE is a difunctional alpha-hydroxy ketone photoinitiator. It is a highly reactive difunctional photoinitiator particularly suitable for clear systems. Due to its molecular structure it is particularly suitable for all systems where low VOC, low migration and low extraction values are needed (food packaging).