Products in Additives: Polyvinyl Acetate (PVA)

LAVIOTHIX® P0 is a thickening and antisettling agent, based on a selected, purified and activated white bentonite clay with a high montmorillonite content Il LAVIOTHIX® P0 is a tixotropic, antisettling, absorbing additives, rheological controller specific for water borne formulations that forms non transparent gel.

Intumax AC 3 is a highly efficient phosphate based halogen free fire retardant intumescent agent. It is pH neutral, and water insoluble. Intumax AC 3 is recommended for use in both indoor and outdoor application in resins including epoxies, acrylates, polyvinyl acrylate, PVA emulsions, and PVC. Applications where Intumax AC 3 has found utility vary greatly from waterborne paints and adhesives to wire and cable. For further assistance and recommended starting formulations, please contact our technical experts.

SYLVARES 1150 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin exhibits excellent compatibility and tackifying properties for use in styrenicblock-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Defoamer for water-based paint

FlameGard™ is a ground Bayer hydrated alumina designed for specific application in polymeric adhesive backing of tufted carpeting to provide a level of flame retardancy to the carpet system. It is specially ground to maintain relatively coarse particle distributions in the median range of 22 to 26 microns and provides a high loading potential in high viscosity backing compounds. FlameGard ATH has a slight off-white or ivory color that is acceptable in most applications.

SYLVATAC RE 98 rosin ester is an economical pentaerythritol ester of tall oil rosin. This rosin ester is a broadly compatible tackifier. This is a versatile product for any application that can tolerate a slightly higher formulation color.

Nayakem Di Butyl Adipate (DBA)is a plasticizer for PVC, PVAc, Vinyl Resins, Cellulose Resins, and Synthetic and nitro cellulose Coating. It is used in cosmetics, personal care products, and in nail polish and skin care products. It is also used in consumer products like printing inks and floor wax.

Aquadhes® 6001 is a a water-based rosin ester dispersion and solvent free.

SYLVATAC RE 95 rosin ester provides broad polymer compatibility and excellent adhesive performance. This rosin ester improves the functional performance and value-in-use of woodworking, packaging and pressure sensitive adhesives.

Kanatol DPGB-50 is a mixed glycol benzoate ester, is clear liquid with chemically stable properties and high boiling point. It is slight soluble in water and very soluble in polymers.K -DPGB 50 is a versatile monomeric plasticizer. It functions very well in several application areas, it is primarily known for its exceptional utility as a plasticizer for flexible PVC & polyvinyl acetate adhesives. Its compatibility with polyvinyl acetate emulsions allows the tailoring of adhesive systems - with excellent wet tack, set times and open times.

SYLVARES 1115 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin exhibits excellent compatibility and tackifying properties for use in styrenic-block-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

Rid-O-Foam® A-4 is a 100% active nonionic type defoamer that acts fast in a wide variety of latex-based paints, coatings and adhesives. A-4 can be used in both flat and semi-gloss paints, both water-reducible and latex-based.

Aquadhes® 6102 is a a water-based rosin ester dispersion and solvent free.

SYLVARES 1105 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This low softening point terpene phenol resin exhibits excellent compatibility and tackifying properties for use in styrenic-block-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

SYLVARES TP 96 resin is a low softening point terpene phenolic resin having broad polymer compatibility. This thermoplastic resin is designed to tackify hot melt and pressure sensitive adhesives providing improved tack, peel and flexibility for EVA, SIS and acrylic based systems. When formulated as a co-resin, this product will significantly improve performance and properties of styrenic block copolymers based adhesives with limited impact on heat resistance.

SYLVALITE RE 105L rosin ester is a pentaerythritol ester of rosin with a higher softening point than typical products of its type. It has been formulated to provide outstanding heat and aging stability. The stability, low volatility and polymer compatibility of this product make it useful in wide variety of adhesives and other applications where improved heat resistance and shear strength are required.

Intumax AC 2BG is a new revolutionary flame retardant / intumescent agent. Intumax AC 2 is ideal for incorporation into thermoset coatings and foams, potting compounds, fiberglass reinforced structures, as well as electronic laminates and many other applications. Intumax AC 2 has been proven successful in epoxy, phenolic, acrylic, vinyl acetate, urethane and PVC resin systems. When blended into your resin system, Intumax AC 2 will react to heat and or flame to foam and form a thick, high yield char barrier. The char barrier will extinguish fire and prevent further flame spread. Additionally, the char foam insulates and protects the coated substrate from heat and fire damage. Intumax AC 2 is halogen free and does not evolve the highly toxic and corrosive gasses associated with many other fire retardants. Intumax AC 2 does all this at loading levels of only 10-20%.

Silquest™ A-174NT silane is a momentive performance materials, methacryloxy functional trimethoxy silane that finds utility in coating, composite and adhesive and sealant systems that cure via a free radical mechanism.