Products in Additives: Silicones

ZemaSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Xylene, Toluene, Parachlorobenzotrifluoride (PCBTF/Oxsol 100®) and Tertiary Butyl Acetate (TBAc).

adaCAL B1 enhances the product's strength, opacity, whiteness, brightness, and viscosity adjustment (thixotropy) Because of these properties, it can be used in a variety of industries, including paint, plastic, paper, food, cosmetics, and rubber. When adaCAL is used in paint, hiding power is increased. The desired level of whiteness is achieved. The surface smoothness is improved. The desired brightness/opacity level is specified. Scrub resistance has been improved. Density is reduced. With the use of adaCAL in plastic, the impact strength of PVC profile products is improved (even at low temperatures)

Hubercarb® Q200 is a medium fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. The Q200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful.

Hubercarb® Q325 is a medium fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows Q325 to be used a wide range of applications including paints, coatings, adhesives, caulks, and concrete building products. Acid solubility above 95% makes Q325 ideal for use in oilfield drilling fluids.

NEVOSIL® SI 145 is a solvent-free, water-diluted emulsion of functional polysiloxanes.

XYSIL® 300 is a hydrophilic Fumed Silica with a specific surface area of 300m2/g, and it is synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis.

Reinste 206T is Used as a functional filler for polysulphide sealant.

Nigtas 10 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Epoxy Paints, Marine Paints, Epoxy Paints, Static Powder Coatings.

Reinste 206M is Used as a functional filler for silicone sealant

SiSiB® FS-0300 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 380 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

Optifil® T is a treated 1.7 micron surface-treated calcium carbonate produced in Quincy, IL containing an extremely low level of crystalline silica content for paints, coatings, adhesives, caulks and sealants applications.

Nigtas 20 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Road Marking Paints, Epoxy Paints.

SiSiB® FS-0150 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 150 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

Extendospheres® CG is our most versatile, general purpose hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

SiSiB® FS-0130 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 130 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

Hubercarb® W3N is a 3-micron calcium carbonate produced in Quincy, IL containing an extremely low level of crystalline silica content for paints, coatings, adhesives, caulks and sealants applications.

Alteo LVSH3 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

KRONOClean® 7000 is a photocatalyst displaying pronounced photoactivity in visible light additionally to being active with UV radiation which makes it suitable for the interior.It effectively removes undesirable odors, degrades organic stains on surfaces, and eliminates numerous pollutants. As a catalyzing component, it can contribute to NOx degradation to improve air quality in towns.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

SiSiB® FS-0380 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 380 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

Hubercarb® Q12-40 is a coarse particle size calcium carbonate produced in Quincy, IL for paints, coatings, adhesives, caulks and sealants applications.

AKTIFIT AM is a SILFIT Z 91 coated with amino functional silane.

Silquest™ A-187 silane is specially formulated for use as an adhesion promoter in SPUR + * prepolymer, urethane, epoxy, polysulfide, silicone and acrylic systems for caulks, coatings, sealants and adhesives. Its epoxy functionality allows Silquest™ A-187 silane to perform as a durable epoxy ring that is reactive with many organic functions. It also offers non-yellowing adhesion in many resin systems and has proven to increase the flexibility of systems when compared to other adhesion promoters under certain conditions.

NEVOSIL® SI 700 is a solvent-free, water-diluted emulsion of functional polysiloxanes.

Hubercarb® Q6 is a fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, adhesives, caulks, plastics, and construction building products.

Alteo SH100 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

SiSiB® FS-0200 Fumed Silica is a hydrophilic fumed silica with a specific surface area of 200 m2/g. Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.

Reinste 206S is Used as a functional filler for various adhesives and sealants such as silicone sealant, polyurethane sealants. Acrlylic sealants used in various construction, sanitary and industrial sectors.

Hubercarb® Q40-200 is a coarse particle size calcium carbonate produced in Quincy, IL for paints, coatings, adhesives, caulks and sealants applications.

KRONOClean® 7050 is a photocatalyst designed for use in conjunction with UV radiation. It is suitable for eliminating unwanted odors such as vehicle emissions and soiling on surfaces from substances like soot; for air purification from organic compounds such as nitrogen oxides, sulfoxides and chlorinated hydrocarbons; and for improving air quality in conjunction with plastic films, window profiles, paints, fibers and other building materials.

XYSIL® R230 is a Fumed Silica aftertreated with HMDS(hexamethyldisilazane) based on a hydrophilic fumed silica with a specific surface area of 300m2/g.

Silquest™ A-Link 25 silane and Silquest™ A-Link 35 silane are unique isocyanate functional silanes. The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most active hydrogen containing compounds. The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates.