Products in Additives: Styrene Butadiene Rubber (SBR)

Irganox® 1726 is a liquid antioxidant belonging to the phenols and phenolics chemical family. Its chemical name is 2,4-bis(dodecylthiomethyl)-6-methylphenol. Primarily utilized as an antioxidant in coatings and finishes, specifically in automotive OEM coatings for both automotive and transportation applications. In the realm of CASE ingredients, this product plays a crucial role in industrial coatings. With a physical form in liquid state, Irganox® 1726 effectively contributes to enhancing the durability and stability of paints and coatings, ensuring optimal performance in the demanding automotive and industrial sectors.

Foamaster® MO NXZ is a liquid defoamer for emulsion paints and adhesive systems. Based on mineral oil, it is a blend of mineral oils and non-ionic surfactants. This defoamer is suitable for emulsion paints based on various polymers, including styrene-butadiene, acrylic, polyvinyl chloride, ethylene-vinyl acetate, vinylidene chloride, and water-soluble alkyds.

Foamaster® MO NDW is a defoamer based on mineral oil, known for its exceptional product stability. It retains defoaming efficiency even after months of storage, contributing to excellent brushability and avoiding fisheyes. Its chemical nature involves a blend of mineral oils and non-ionic surfactants, making it effective in all systems based on synthetic latex.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

TEGO® Antifoam 2291 is a silicone-free, self-emulsifying antifoam concentrate without any silica. This APEO-free organic antifoam is designed for use as an anti-foaming agent in waterborne adhesive formulations, aligning with eco-friendly labeling claims. Categorized under CASE ingredients within foam control additives.

Dragonox® 565 is a highly effective anti-oxidant used for a variety of elastomers, including polybutadiene (BR), polyisoprene (IR), emulsion styrene butadiene (SBR), nitrile rubber (NBR), carboxylated SBR latex (XSBR), and styrenic block copolymers such as SBS and SIS. This product is also used in adhesives (hot melt, solvent-based), natural and synthetic tackifier resins, EPDM, ABS, impact polystyrene, polyamides, and polyolefins.

Flytac 188 is a light yellow aliphatic hydrocarbon resin. It is polymerized by high-purity 1.3-pentadiene and designed as a tackifier in hot melt/pressure-sensitive adhesives. This product has good heat resistance, light odor, and good compatibility with polymers like SBS, SIS, SEBS, EVA, SBR, NR, and polyisobutylene.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Dragonox® 565GR is a high-molecular-weight, multifunctional, hindered phenol antioxidant. It is mainly suitable for the stable processing of unsaturated rubber after processing, which can ensure that the material does not undergo thermal oxidative degradation during production, processing, and end-use. The added amount of this product is small, has low volatility and high color fastness, and can prevent the formation of gel.

Dragonox® CPL is an antioxidant with strong tinting strength. It is mainly used as a compound that protects tints and non-dirt dyes. This product may also be applied in polymer processing to enhance stability. Application Areas Apparels Automotive interiors Medical devices and assemblies Healthcare packaging Coated paper and paperboard

DeCAL 5030 is designed to release bubbles and control foam generated in a wide range of aqueous systems containing surfactants. It is a blend of non-ionic surfactants and hydrophobes in a highly refined mineral oil and is non-silicone based. It is used in many applications including water-based paints, adhesives, carpet backing, paper coating, and effluent treatment.

DeCAL 5040 is a highly effective foam control agent for emulsion paints, coatings, and adhesives. The product utilizes new water-in-oil technology to deliver a cost-effective product specifically developed to reduce air entrainment during the manufacture and application of water-based paints, adhesives, and coatings.

Trapylen® 187 EAC is a chlorinated polypropylene dissolved in ethyl acetate. It possesses a slightly lower chlorine content compared to the similar Trapylen® 186 EAC but maintains good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 EAC lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

Trapylen® 186 X is a medium-chlorinated polypropylene dissolved in xylene. Characterized by a higher chlorine content compared to other grades, it exhibits relatively good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film produced by Trapylen® 186 X boasts high gloss and remarkable chemical and aging resistance. Its primary advantage lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, to a limited extent, polyethylene.

Trapylen® 186 S is a chlorinated polypropylene with a higher chlorine content compared to other Trapylen® grades. It demonstrates good compatibility with other resins and polymers, excellent pigment wetting, and forms a high-gloss, chemically resistant film. The primary merit of Trapylen® 186 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene.

Trapylen® 186 EAC is a chlorinated polypropylene dissolved in ethyl acetate. With a higher chlorine content compared to other Trapylen® grades, it exhibits good compatibility with other resins and polymers, excellent pigment wetting, and results in a high-gloss, chemically resistant film. The main advantage of Trapylen® 186 EAC is its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited.

Trapylen® 187 S is a chlorinated polypropylene characterized by a higher chlorine content compared to other Trapylen® grades. This feature results in good compatibility with other resins and polymers, coupled with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

Texipol 63-400 is an inverse emulsion thickener that imparts a pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic copolymer which gives almost instantaneous thickening when mixed directly into aqueous formulations.

PhosGard® 140 is a liquid chemical compound known as Tris(2-butoxyethyl) phosphate, falling under the phosphates family. With low viscosity and flame retardant properties, it functions as a versatile additive. Primarily used as a plasticizer and leveling agent in waterborne adhesives and decorative paints, PhosGard® 140 is available in drums and totes (IBC) packaging.

Borchi® Gen SPE is a non-ionic, APEO- and VOC-free* wetting and dispersing agent designed for water- and solvent-based coating systems. This agent enhances the wetting of organic pigments and carbon black, stabilizes coating consistency and color strength, and is suitable for use across all pH ranges. With its OH functionality, it can be covalently bonded in cross-linked systems, making it a valuable addition to your coatings.

Borchi® Gen LMW is a non-ionic, APEO- and VOC-free* wetting and dispersing agent tailored for water- and solvent-based coating systems. This agent enhances the wetting of organic pigments and carbon black, providing stability to the finished coating's consistency and color strength. It is compatible with all pH ranges and boasts OH functionality, allowing for covalent bonding in cross-linked systems. A valuable choice for your coating needs.

Andisil® 6920 Silane is a bifunctional, sulfur-containing organosilane used in combination with white fillers that contain silanol groups for rubber applications.

A mercapto functional organic adhesion promoter synthesized using a stabilized bimetal precursor. The product is supplied in ethylene glycol to aid in rapid dispersion and solubilization of the active component in polymer matrices.

Aminopropyltrimethoxysilane. Superior adhesion promoter in RTV silicones and other hybrid sealants. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Bis(trimethoxysilylpropyl)amine. Clear to yellowish transparent liquid appearance. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Vinyl-functional coupling agent, It is very easy to dissolve in water as well because of its ether structure. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Aminoethylaminopropyltrimethoxysilane. Used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Mercapto-functional silane used as a coupling agent in polysuflide and polyurethane caulks and sealants. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Teckrez® CX-902 is a hydrocarbon resin based on selected C9 and DCPD feedstocks. It is used as an alkyd coating modifier to increase hardness, gloss, and chemical resistance. As a resin binder in printing inks, Teckrez® CX902 improves pigment wetting and solvent release. Teckrez® CX902 is used as a rubber processing aid, tackifier resin in mastic adhesives, and modifier in concrete curing and other coating applications.

Hydrax™ H910 is produced with the finest particle size, highest quality grades of ATH available. This free flowing white powder provides a cost effective way to flame retard and smoke suppress plastics, rubbers, paper adhesive, coatings and other polymer systems.

Coupling agent in filled polymer systems, which cure via free radical mechanisms, copolymerization or grafting and as a surface modifier. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

RIANOX® 1520LR is a multifunctional liquid phenolic antioxidant for processing and long-term thermal stabilization of elastomers, plastics and related products.

Ureido silane used as a coupling agent in a wide range of applications for adhesives, sealants, coatings, foundry and fiber glass, etc. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.