Products in Fillers & Extenders: Waterborne Adhesive

Lithorit H is a functional filler, which is a natural composition of the 3 minerals muscovite, quartz and chlorite. Due to the high-quality production and the extraordinary good properties Lithorit H can be used as filler in several applications. For example, Paint, Coatings, Plasters, adhesives and other water-based systems.

KaMin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin® 90 is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important.

Lithorit H is a functional filler, which is a natural composition of the 3 minerals muscovite, quartz and chlorite. Due to the high-quality production and the extraordinary good properties Lithorit H can be used as filler in several applications. For example, Paint, Coatings, Plasters, adhesives and other water-based systems.

Lithorit H is a functional filler, which is a natural composition of the 3 minerals muscovite, quartz and chlorite. Due to the high-quality production and the extraordinary good properties Lithorit H can be used as filler in several applications. For example, Paint, Coatings, Plasters, adhesives and other water-based systems.

Lithorit H is a functional filler, which is a natural composition of the 3 minerals muscovite, quartz and chlorite. Due to the high-quality production and the extraordinary good properties Lithorit H can be used as filler in several applications. For example, Paint, Coatings, Plasters, adhesives and other water-based systems.

KaMin® 80B is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications.

Nellai Clay is a selective source of specially processed kaolin powder helps to improve the flowability with better adhesion and dry time properties which is more suitable in PVA and water based adhesives.

Vitro Minerals LA-700(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

The Micronized Products Mica 325# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

Vitro Minerals LA-800(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

Vitro Minerals LA-350(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

The WhiteLite™ WL-32 Lightweight Mineral Powders are amorphous products obtained by the fusion of several inorganic substances mainly silica, alumina, boria, and sodium oxide, with minor amounts of calcia.

Vitro Minerals LA-600(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

CreaFill Fibers Corp. Creamix and Createch provides industrial fillers capable of meeting all of a manufacturer’s requirements from lower cost functional fibers to very pure specialized powders. Cellulose fibers are not all the same; Some are superior. CreaMix and CreaTech outperforming the rest.

WhiteLite™ WL42 lightweight mineral powders are amorphous products obtained by the fusion of several inorganic substances mainly silica, alumina, boria, and sodium oxide, with minor amounts of calcia.

Micronized Products Mica 40# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

Micronized Products Mica 60# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

Vitro Minerals LA-500(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

Vitro Minerals LA-300 are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

Vitro Minerals LA-400 are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.