Products in Fillers & Extenders: Flattener

Nicron® 503 is a high purity, 5-Hegman microcrystalline talc product with minimal viscosity build. Nicron® 503 is part of the Engineered Series of Magris Talc products that offer unique particle size distributions for improved paint performance properties. Nicron® 503 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 503 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Nicron® 660 is an off-white, platy, high-purity, very fine talc, which is primarily used in paints and coatings. Nicron® 660 has excellent flatting characteristics, superior anti-settling properties, and is the product of choice in gel-coats. Nicron® 660 is used in rubber, wire, cable, and plastic applications.

Nicron® 665 is an off-white, high-purity, platy, ultrafine talc. It is a highly effective gloss control additive in paints and coatings. Nicron® 665 could be used in performance plastics and plastic films for excellent nucleation and very good stiffness, HDT, dimensional stability, and esthetics.

Nepheline Syenite - Filler Grade APNS 10 is a naturally occurring, silica-free, anhydrous sodium-potassium alumina silicate, that delivers improved product performance and is accordant with modern environmental and industrial hygiene standards.

Nepheline Syenite - Filler Grade APNS 4 is a naturally occurring, silica-free, anhydrous sodium-potassium alumina silicate, that delivers improved product performance and is accordant with modern environmental and industrial hygiene standards.

Nordkalk C-2 consists of three products: Nordkalk C2, Nordkalk C5 and Nordkalk C7. The specific characteristics of Nordkalk C-Series products are presented in the table below. The products are available in large and small sacks and in bulk.

COATTUN Q.8 is a high quality Quartz, produced from deposits in the Cine-Milas region, Turkiye.

Köstrosol® AD 2035 is a whitish turbid aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica is pre-final coated and stabilized by aluminum oxide. Afterward, the PH is adjusted by a weakly acidic ion exchange.

Köstrosol® AD 1530 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica is pre-final coated and stabilized by aluminum oxide. Afterward, the PH is adjusted by a weakly acidic ion exchange.

The euroMinerals incomp special are multi-functional extenders based on talc and dolomite, ground to different fineness and talc content.

AnTec C-96 is a kind of ultra-fine aluminum silicate with high brightness and fine particle size. This product has the characteristics of good covering performance, strong coloring ability, low sieve residue, low viscosity, and easy dispersion.

Köstrosol® WA 1530 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica is pre-final coated and stabilized by aluminum oxide. Afterward, the PH is adjusted by a strongly acidic ion exchange. Köstrosol® WA 1530 with tested specification values receives an documented addition of sodium hypochlorite in order to obtain a residual chlorine content between 1 - 3 mg/L (as Cl2) at the date of delivery.

Glass Microspheres HGT60 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

Nordkalk Wicroll 40 is characterized by different particle sizes and low, medium or high aspect ratio (L/D). In addition, wollastonite products are available surface treated, e.g. in plastics to enhance dispersion in polymer resin. Due to its unique chemical composition, particle structure and high brightness, wollastonite offers many advantages for glazing and body formulations in ceramic applications. Wollastonite is used as a functional filler in paint & coating applications, where technical requirements are high.

Celatom® MW-27 are used in an extremely large variety of industries including aircraft, building & construction, plastics, paint & coatings, and many industrial applications, in addition to cosmetics and dental.

Celatom® LCS-3 is a functional products for the paint and coatings industry. High efficiency materials for matting, texture and rheology.Get ready for a bright future with our new unique, high performance paint and coatings additives including flux-calcined diatomaceous earth (DE), natural virtually..

euroMinerals intalc is white, hydrophobic, flexible, soft therefore versatile. Depending on specifications, the different types of talc are used for the intalc products and are manufactured in different production processes: intalc is a top quality product, produced in a wide range of fineness.

COATTUN Q.3 is a high quality Quartz, produced from deposits in the Cine-Milas region, Turkiye.

Calcit HydroPlex 90/78 is a natural, wet ground calcium carbonate. With its regular particle distribution, it contributes to a better rheology and thus to a higher dry matter of the coating mixture. It is used as a coating pigment in the production of paper and board, improving their smoothness, glossiness and printability.

SODASIL® P95 is a Amorphous aluminum and sodium silicate obtained by precipitation in an aqueous medium.

Nordkalk C-7 consists of three products: Nordkalk C2, Nordkalk C5 and Nordkalk C7. The specific characteristics of Nordkalk C-Series products are presented in the table below. The products are available in large and small sacks and in bulk.

Celatom® MW-25 are used in an extremely large variety of industries including aircraft, building & construction, plastics, paint & coatings, and many industrial applications, in addition to cosmetics and dental.

Hubercarb® W3N is a 3-micron calcium carbonate produced in Quincy, IL containing an extremely low level of crystalline silica content for paints, coatings, adhesives, caulks and sealants applications.

Calcit HydroPlex 70/65 is a natural, wet ground calcium carbonate. With an extremely bright color and constant viscosity it is used as a filler in the production of paper and board, improving their opacity, smoothness, glossiness and printability.

Köstrosol® WA 1520 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica is pre-final coated and stabilized by aluminum oxide. Afterward, the PH is adjusted by a strongly acidic ion exchange. Köstrosol® WA 1520 with the tested specification values receives an documented addition of sodium hypochlorite in order to obtain a residual chlorine content of between 1 - 3 mg/L (as Cl2) at the time of delivery.

ADMAFINE SO-C5 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

Köstrosol® A 1530 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na+) and coated by aluminum oxide. Köstrosol® A 1530 with the tested specification values receives an documented addition of sodium hypochlorite in order to obtain a residual chlorine content of between 1 - 3 mg/L (as Cl2) at the time of delivery.

Köstrosol® 1540 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na+). Köstrosol® 1540 is a pure colloidal silica without any organic additives.

Microblanc Matting is a Calcium Carbonate filler that can be used as a matting agent. The raw material is Calcite of the highest purity and whiteness.

AnTec C-98S is a kind of ultra-fine calcined kaolin with high brightness and fine particle size . This product has the characteristics of excellent hiding performance , strong coloring ability , low sieve residue, and easy dispersion .

Köstrosol® 2040 AS is opalescent to a clouded liquid aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Ammonia (NH4+). Köstrosol® 2040 AS is a pure colloidal silica without any organic additives.

ADMAFINE SO-E5 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

COATTUN Q.5 is a high quality Quartz, produced from deposits in the Cine-Milas region, Turkiye.