Products in Surface Modifiers: Waterborne Adhesive

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Deuteron® ND 953 serves as an aqueous solution containing sodium polyaldehyde carboxylate. This compound functions as a dispersant, particularly beneficial for dispersing inorganic pigments and fillers within water-based formulations. Additionally, it efficiently reduces viscosity, especially in highly filled emulsion paints and plasters, aiding in their application and consistency.

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

West Tech Chemical Ltd AT 820 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

Aquadhes® 6001 is a a water-based rosin ester dispersion and solvent free.

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

AQUATAC 6025 resin dispersion is a low softening point rosin ester waterborne tackifier for pressure sensitive adhesives. AQUATAC 6025 can be used with higher softening point waterborne tackifiers to improve low temperature adhesion.

AQUATAC XR-4343 resin dispersion is a waterborne tackifier combining high solid content with high adhesion performance and stability at high speed. This product is especially designed to be formulated into pressure sensitive adhesives (PSA) where high shear strength is required together with high adhesion.

WREAMA is a solution of a polyether-modified dimethyl polysiloxane co-polymer designed for use in all waterbased and water reducible alkyd resin systems.

West Tech Chemical Ltd AT 840 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

V-TAC™ 9001 dispersion is an aqueous, 55% solids, solvent-free anionic rosin based dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, natural rubber and polychloroprene. V-TAC™ 9001 enhances adhesion as well as superior heat resistance. V-TAC™ 9001 is recommended as a tackifier for pressure sensitive and contact-bond adhesives.

GlucoSol® 721 is a new entry in the Chemstar water-soluble product line. It is a highly substituted natural polysaccharide designed to impart enhanced functional properties including: solution stability, salt tolerance, surface activity, water retention, improved rheology and viscosity. GlucoSol® 721 offers a unique alternative to competitive natural and synthetic water-soluble polymers

Aquadhes® 6002 is a a water-based rosin ester dispersion and solvent free.

West Tech Chemical Ltd WT 820 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

Fintac 2331 is a modified rosin which offers an excellent combination of oxidation and crystallization resistance. This product functions as a tackifier for SBR, natural rubber, butyl rubber, ethylene-vinyl acetate and other polymers. It can be delivered in flaked and solid forms. Formulated in solvent-based and water-based adhesives, it exhibits no tendency to crystallize. It meets the requirements of the Code of Federal Regulations, Title 21, under the following section: 175.105 Adhesives; 176.210 Defoaming Agents Used in the Manufacture of Paper and Paperboard; 177.2600 Rubber Articles Intended for Repeated Use.

Michem® Prime 4990R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

Winlex 4025 is a low softening point rosin ester with good stability and mild odor. It is easily emulsified in water by conventional means. The principal uses for this resin are in the formulation of oil varnish, lacquer, hot-melt, heat-sealing, and pressure-sensitive adhesives. It has a suitable FDA status for use in food packaging applications covered by 175.105.

V-TAC™ 7901 dispersion is an aqueous, 53% solids, solvent-free anionic hybrid dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, polychloroprene and natural rubber. V-TAC™ 7901 enhances adhesion and is especially recommended for acrylic latex systems. V-TAC™ 7901 offers an excellent balance of adhesion for polyolefin substrates and recycled corrugated.

TACKIFIER 71 is an acrylic aqueous dispersion. Tg = -46°C (approx).

GlucoSol® 621 is a new entry in the Chemstar water-soluble product line. It is a highly substituted natural polysaccharide designed to impart enhanced functional properties including: solution stability, salt tolerance, surface activity, water retention, improved rheology and viscosity. GlucoSol® 621 offers a unique alternative to competitive natural and synthetic water-soluble polymers

TAMANOL E-102A is a terpene phenolic resin emulsion consisting of microscopic particles, especially prepared for use in water based adhesives, such as acrylic emulsions, natural rubber and synthetic rubber latex based adhesives.

V-TAC™ 8501

Rit-Chem Cambytac is an aqueous dispersion of rosin derivatives. Used as a tackifier in all water-based adhesive systems especially self adhesive labels.

Winlex 4270 is a liquid rosin ester. It is designed for applications requiring low odor and high tack. It has a suitable FDA status for use in food packaging applications covered by 175.105.

Michem® Prime 4983R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

Aquadhes® 6102 is a a water-based rosin ester dispersion and solvent free.

TERGUM 42 is a liquid rosin triethylglycol ester, to be added to water based adhesive or to hot-melt formulations in order to increase tack properties.

PL-200 is an effective hydrophilic fumed silica providing excellent gloss and rheology control in inks, coatings, adhesives gel coats and resins.

AQUATAC 6085 resin dispersion is an unique rosin ester dispersion for use in waterborne pressure sensitive adhesives. Formulations with AQUATAC 6085 will have aggressive tack and peel, as well as excellent shear properties.

Aquadhes® 6101 is a a water-based rosin acid dispersion and solvent free.

AQUATAC E 6180 resin dispersion is an alkyl phenol free rosin ester dispersion designed for high-performance waterborne pressure sensitive adhesives using the latest in surfactant technologies. It was developed for use in label and tape applications requiring an excellent balance of loop, shear, and peel properties while maintaining mechanical stability when used on high mechanical shear adhesive coating processes.

West Tech Chemical Ltd WT 840 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.