Products in Monomers & Intermediates: Acrylics & Acrylates

bossin® W-02 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic.

RESILAC 162 is a modified acrylic polyol represent a special group of amorphous polyols, obtained by radical copolymerisation of acrylic monomers such as acrylic or methacrylic acids and esters. The source of hydroxyl groups in these acrylic polyols is the utilization in the radical copolymerisation reaction of hydroxyalkyl acrylates or hydroxyalkyl methacrylates as comonomers. The acrylic polyols are used in high-performance polyurethane (PU) coatings mainly for automotive and marine coatings.C&E offers a range of high performance, high solids and low VOC acrylic polyols. specialty chemical manufatcurer.

SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate (HPMA), specifically designed for use in solder resist coatings on printed circuit boards and may be cured by ultraviolet light (UV) or electron beam (EB).

KELLOMER STA-2140 is a star branched acrylate. Films of STA-2140 cured by UV/EB exhibit high hardness with flexibility and excellent scratch resistance to film and plastic.

bossin® W-151 has excellent flexibility and toughness, curing fast.

SU 522 is a hexa-functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring fast curing, high gloss and non-yellowing properties.

Photomer® 4135 is a low odor, low volatility mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UV- and EB curable applications and is particularly suited to use in coatings for optical media.

PHOTOMER® 4335 is a multifunctional monomer which contains a mixture of tri and tetra acrylate. It can be used in a variety of UV curable applications, where a high degree of cross linking is required.

CE CRYL 800T is a 80% Epoxy Acrylate Oligomer with 20% monomer (TPGDA) .

PHOTOMER® 4211 is a highly reactive monofunctional acrylate monomer, it can be used as a low viscosity diluent for ultraviolet radiation cured systems.

MPD Industries UVP 0206 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a low odor and good flexible monomer. It is compatible with a wide range of acrylated resins.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

SU 511 is a difunctional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring good toughness, good adhesion on glass and plastics and non-yellowing properties.

PE Acrylate Oligomers

RESILAC 167R is a Modified acrylic polyolr represent a special group of amorphous polyols, obtained by radical copolymerisation of acrylic monomers such as acrylic or methacrylic acids and esters. The source of hydroxyl groups in these acrylic polyols is the utilization in the radical copolymerisation reaction of hydroxyalkyl acrylates or hydroxyalkyl methacrylates as comonomers. The acrylic polyols are used in high-performance polyurethane (PU) coatings mainly for automotive and marine coatings.C&E offers a range of high performance, high solids and low VOC acrylic polyols. specialty chemical manufatcurer.

PHOTOMER® 4149 is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

PHOTOMER® 4006 TF (TMPTA) is a toluene free aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy, polyurethane, and polyester oligomers

SP 283Nis a amino modified multi-functional polyester acrylate oligomer developed for UV/EB cure coating applications requiring high gloss, fast curing and low irritating properties.

SU 704 is a trifunctional aromatic urethane acrylate oligomer with HDDA developed for UV/EB cure coating applications requiring good flexibility, very good abrasion and solvent resistance.

MM-204 is a mono-functional acrylate monomer. It has low shrinkage and a high glass transition temperature upon cure. The secondary ester linkage is resistant to hydrolysis.

bossin® W-100M has a high UV curing activity with no solvents.

UVP 0611, is a fatty acid based difunctional Bisphenol A based epoxy acrylate oligomer that offers very fast cure speeds and chemical resistence. It imparts toughness and flexibility to cured lithographic and screen inks also to plastic and wood coatings.

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

PHOTOMER® 4399 is a medium viscosity mixture of penta-acrylate and hexa-acrylate monomer for UV/EB curable coatings and inks on paper, foil, wood and plastic substrates. It imparts excellent abrasion and scratch resistance as well as fast cure response together with good water and chemical resistance when formulated into UV/EB curable applications.

Elite UVP6070-IB20 is a flexible hybrid ester acrylate with 20% IBOA.

MM-220 is a low viscosity mono-acrylate monomer. The polycyclic ring structure helps minimize shrinkage on cure. It also has low weight loss on cure. 

Epoxy Acrylate Oligomers

KELLOMER VC-4010 is an aliphatic urethane diacrylate oligomer. The cured films have good flexibility and improved adhesion to substrate.

Photomer® 4158 is a high molecular weight analog of ethoxylated TMPTA (Photomer® 4149). Because of its increased ethoxylate content, Photomer® 4158 exhibits greater hydrophilic characteristics than unmodified acrylate polyols and will provide an excellent starting point for developing water dispersible UV/EB curable inks and coatings.

Elite UVP6338 is a flexible hybrid ester acrylate which is BPA-free and contains 30% TMP(EO)TA.

MPD Industries UVP 0201 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer.

SU 571 is a hexa-functional aliphatic urethane acrylate oligomer. This product is characterized fast curing, high gloss and good abrasion resistance properties.

RESILAC 167L is a Modified acrylic polyol represent a special group of amorphous polyols, obtained by radical copolymerisation of acrylic monomers such as acrylic or methacrylic acids and esters. The source of hydroxyl groups in these acrylic polyols is the utilization in the radical copolymerisation reaction of hydroxyalkyl acrylates or hydroxyalkyl methacrylates as comonomers. The acrylic polyols are used in high-performance polyurethane (PU) coatings mainly for automotive and marine coatings.C&E offers a range of high performance, high solids and low VOC acrylic polyols. specialty chemical manufatcurer.

Synpol AT 70 Acrylic Resin is a thermosetting carboxyl functional acrylic co-polymer solution for baked coating along with epoxy resins.

PL-3122 Propoxylated Tetrahydrofurfuryl Acrylate is a monofunctional monomer providing good adhesion to plastics and low viscosity.

Epoxy Acrylate Oligomers