Products in Intermediates

NIPPOLLAN N-963 is newly developed polycarbonate diol (PCD) with added flexibility to the initial versions of NPU’s PCD (NIPPOLLAN 980, 981) products. NPU’s initial PCD products possessed high durability and stiffness due to its straight aliphatic carbonate chain structure, and have been widely applied in synthetic leather and various other applications. However, the lack of flexibility was one of its disadvantages. Therefore, a new series of PCD were developed which possessed the same durability but also with added flexibility property.

Polem A is a branched, castor oil-based polyol emulsion.

PETOL PP 2725 is a reactive polymer polyol with about 25% solid content and an approximate 4700 average molecular weight of standard polyol, designed to obtain high resilience flexible polyurethane foams (HR).

Petol PS 500-4G is a polyether polyol obtained by propoxilation of glycerin - sorbite mixture under catalyst conditions.

NIPPOLLAN N-966 is newly developed polycarbonate diol (PCD) with added flexibility to the initial versions of NPU’s PCD (NIPPOLLAN 980, 981) products. NPU’s initial PCD products possessed high durability and stiffness due to its straight aliphatic carbonate chain structure, and have been widely applied in synthetic leather and various other applications. However, the lack of flexibility was one of its disadvantages. Therefore, a new series of PCD were developed which possessed the same durability but also with added flexibility property.

Rokopol® iCan 2432 is a specialist, base polyether polyol dedicated to production of one-component high-efficiency foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 145-160 mgKOH/g, and dynamic viscosity within the range of 150-250 mPas at temp. 25°C.

POLURENE MT100 LLV is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

POLURENE OK. D. AE is recommended for the formulation of overprinting coatings for paper and polishable varnishes and enamels with good color retention for wood, metal, plastic.

Petol PS 480-6 is a polyether polyol with high functionality, 6, obtained by propoxilation of sorbitol in basic catalyze.

Yunan Tin Tetrabutyl Tin( TBT) is a colorless or buff liquid, existence of a few floccule or sediment is allowed. It may look turbid from time to time.

Petol PP 201 is a non-reactive polymer polyol, with a content of about 20% solid substance and with 3500 average molecular weight of base polyol, designed for the production of high hardness flexible slabstock foams. It is a BHT-free product and can be used with or without auxiliary blowing agent to produce a wide range of foam grades, from low to high density.

PCC Chemax Monochloroacetic acid 80% U-P is a product of the highest purity available, in which the DCAA content does not exceed 90 ppm. It is intended for use primarily in pharmacy in processes where the DCAA content is critical to the quality of the final product. Chloroacetic acid 80% H-P is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is easily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

Petol PP 401 is a non-reactive polymer polyol, with about 40% solid content and 3500 average molecular weight of standard polyol, designed to obtain enhanced load bearing flexible slabstock foams. PETOL PP 401 can be used individually or blended with other polyols.

POLURENE OK-HP is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required.

PCC Chemax Monochloroacetic acid 100% H-P, flakes is a product, in which the DCAA content does not exceed 1500 ppm. Chloroacetic acid 100% is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated .

Yunan Tin Monobutyl Tin Trichloride (MBTC) is a clear sandy beige liquid.

Properties of POLURENE MD 1600 are the excellent elasticity and the good reactivity. POLURENE MD 1600 is recommended for the formulation of two components polyurethane solvent-free coatings, like: self-levellings, sealants and two components adhesives or primers. The properties of hardness and elasticity of the coatings depend on type of polyol used.

PETOL 250-3 is a polyoxypropylene triol, 670-average molecular weight. This polyether triol is used in the manufacture of rigid, semi-rigid and special flexible polyurethane foams. If blended with other PETOL polyols, it can vary physical and mechanical characteristics of semi-rigid and rigid polyurethane foams. The product is also used in blends for applications used in the production of coatings, adhesives and casting elastomers.

PCC Chemax Monochloroacetic acid 100% technical, flakes is a product, in which the DCAA content does not exceed 1500 ppm. Chloroacetic acid 100% is highly reactive and is used as a raw material for many important organic compounds. It has a pungent odor, is readily soluble in water, ethanol, methanol, acetone, benzene, chloroform, dimethylsulfoxide, and dimethylformamide. It is poorly soluble in hydrocarbons and their halogenated derivatives.

POLURENE MT90 AB is a clear liquid. Compliance with EU and REACH.

NIPPOLLAN N-971 is newly developed polycarbonate diol (PCD) with added flexibility to the initial versions of NPU’s PCD (NIPPOLLAN 980, 981) products. NPU’s initial PCD products possessed high durability and stiffness due to its straight aliphatic carbonate chain structure, and have been widely applied in synthetic leather and various other applications. However, the lack of flexibility was one of its disadvantages. Therefore, a new series of PCD were developed which possessed the same durability but also with added flexibility property.

Mason Corporation Stannic Chloride Anhydrous is a clear, colorless, heavy fuming liquid. It fumes in moist air to form basic chloride, solid and semisolid hydrates and liberates vapors of hydrogen chloride. It is miscible with most hydrocarbons and chlorinated hydrocarbons. It is of the highest purity found in the world with no free chlorine present in the final product.

PETOL 56-2A is a high purity polyoxypropylene glycol, with a molecular weight of 2000.PETOL 56-2A is a homopolymer diol. The product is acidified by the supplier and does not request acidification by the customer.

Petol PS 400-4G is a medium functional polyether polyol obtained by propoxilation of glycerin -sorbite mixture under catalyst conditions.

PETOL PP 131 is a non-reactive polymer polyol with about 13% solid content and 3500 average molecular weight of standard polyol, designed for the production of enhanced load bearing flexible polyurethane slabstock foams. PETOL PP 131 is a BHT-free product and can be used both with and without auxiliary blowing agent to produce a wide range of foam grades, from low to high density.

Polyurethane adduct for general purposes. Suitable for 2K varnishes and enamels. POLURGREEN AD-01 is recommended for the formulation of two component varnishes and enamels for parquet, wood furniture, metal, plastic and paper, hardeners for shoe market adhesive and inks.

PETOL 56-2 is a high purity polyoxypropylene glycol, 2000 molecular weight. PETOL 56-2 is a diol homopolymer and the product is not acidified.

POLURENE MT 100 LV is recommended for the formulation of non-yellowing,high solid content and low viscosity coatings with for metal, wood and plastics. POLURENE MT 100 LV is used to prepare formulations with higher solids content, compared to standard HDI biurets and trimers. POLURENE MT 100 LV should not be thinned to below a solids content of 40%.

Synthel PE-3015 is solvent-free moisture curing prepolymer based on aromatic polyisocyanate.

PCC Chemax Dodecylphenol Premium is a dense, viscous, light yellow liquid with a characteristic phenolic odor. It is a mixture of isomers containing mainly para-dodecylphenol. Dodecylphenol Premium is characterized by significantly reduced amount of light alkylphenols, including nonylphenol. Product has also improved color compared to standard quality dodecylphenol. Dodecylphenol Premium is difficult to dissolve in water and is very soluble in aliphatic alcohols, ketones, esters and aliphatic hydrocarbons.

Polurene MT 90 AB is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low-viscosity 2K paints and enamels for metal, wood and plastics that contain high solids. This product contains less than.2% HDI isocyanates.

POLURENE MD 1500 is Polymeric MDI with excellent flexibility. Recommended for solvent free 2K PU coatings like self-levelings, synthetic mortars and adhesives, fast drying and more flexible than POLURENE MD 1600.

POLURENE AC510 is a clear liquid. Compliance with EU and REACH.

SyncoPol DL1001 is a medium molecular weight polyether diol used in a wide variety of polyurethane applications ranging from elastomers, coatings and adhesives to prepolymers and blends for rigid foam systems. SyncoPol DL1001 is a clear liquid of molecular weight 1000 g/mol with low viscosity in range 120-180 cPs at 25°C, hydroxyl value 107-117 mgKOH/g, functionality ~2.0.

NIPPOLLAN N-964 is newly developed polycarbonate diol (PCD) with added flexibility to the initial versions of NPU’s PCD (NIPPOLLAN 980, 981) products. NPU’s initial PCD products possessed high durability and stiffness due to its straight aliphatic carbonate chain structure, and have been widely applied in synthetic leather and various other applications. However, the lack of flexibility was one of its disadvantages. Therefore, a new series of PCD were developed which possessed the same durability but also with added flexibility property.

PETOL 160-3 is a polyoxypropylene triol, 1055 average molecular weight. It is the standard polyol for one-component spray foams.