Products in Prepolymers & Polyols: Polyurethanes (PU)

SPUR+™ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in industrial and transportation applications where higher tensile strength is required.

BLUEPUR 3038 is a aliphatic-aromatic isocyanurate.

POLURGREEN PRP 5500 01 have adhesives and sealants applications. POLURGREEN PRP 5500 Olis a branched polyether based prepolymer with low elongation and high modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 5500 Olis mainly used in the formulation of IK polyurethane adhesives and sealant with very low monomer content.

UCOPOL M 551 is used to formulate one component and two component sealants and industrial adhesives.

POLURENE LP100NPF is a yellow liquid. Compliance with EC and REACH.

POLURGREEN PRP 750 01 Olis a polyether based prepolymer with low elongation andhigh modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 750 01 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content.

POLURENE FP 75 K is recommended in 2K systems for either inks or OPV. In the formulation of 2K over print varnish, POLURENE FP 75 K is recommended to impart elastomeric properties to the varnish.

POLURGREEN PRP 4041 Olis a polyether based prepolymer with low elongation andhigh modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 4041 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content, where yellowing resistance is needed.

POLURENE AD is recommended for two pack polyurethane systems where good surface hardness, durability, brightness and solvent resistance are required. The final properties of coatings depend on the type and on the quantity of the OH terminated polymer that is used as the first component. Due to its aromatic content, POLURENE AD can be used for indoor and outdoor coatings, when a good yellowing resistance is not requested.

POLURENE LP 100 LV, with very low viscosity, is excellent for improving the flexibility of epoxy systems and for adhesives and sheaths. It is recommended for adhesion of wood with building materials (concrete, ceramic, stoneware, marble).

POLURGREEN PRP 940 01 Olis a polyether based prepolymer with low elongation andhigh modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 940 01 Olis mainly used as IK polyurethane adhesives with very low monomer content.

BLUEPUR T 53 provides good adhesion on different substrate. It shows good mechanical properties, high tensile strength, high elongation at break and good modulus.

Prepolymer used to formulate 1K and 2K sealants and industrial adhesives. It can be mixed with UCOPOL M 551, more flexible, to adjust final properties and/or drying time.

POLURGREEN PRP 450 Olis a polyether based prepolymer with high elongation andgood modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 450 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content.

UCOPOL M 541 is used for the formulation of one component and two component sealants and industrial adhesives. UCOPOL M 541 is recommended for the formulation of both sealants and coatings for concrete substrates.It can be mixed with UCOPOL M 551 in order to provide tough flexible sprayable films.

SPUR+™ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+™ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable resin is an excellent candidate to consider in formulating construction sealants requiring rapid cure, good water resistance, high flexibility and adhesion to most construction substrate materials such as concrete, marble and glass. SPUR+™ 1012 prepolymer can help enable the formulation of non-staining, paintable sealants.

SPUR+™ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required.

SPUR+™ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve a range of applications, particularly where HAPs emissions are a significant factor.