Products in Pigments & Colorants: Good Brightness

Syntran® OP 1133 is based on Interpolymer Corporation's "opaque polymer" technology, which can be used to replace a percentage of the titanium dioxide used in white paints while maintaining the same or similar coverage. The ideal reduction level of titanium dioxide is approximately 15% when using this technology. Higher reductions of titanium dioxide levels can be achieved, but you may experience a slight loss in the coverage of the paint.

DCL CB-180-73 73% Leafing Aluminum Paste is a coarse paste with an extremely high leafing value and brightness, making it an excellent choice for industrial coatings. It meets the standards set by ASTM D962-II, C and is suitable for various industrial applications.

DCL 7075 65% Leafing Aluminum Paste (CB-180-65) is a coarse paste widely used in asphalt-based roof coatings with an extremely high leafing value and brightness. 7075 is mainly recommended to be used in industrial coatings, it also meets the ASTM D962-II, C standards.

DCL 06-905 DNA Orange, PO.5 is a bright, semi-opaque orange pigment with good lightfastness. It is used in some applications to replace molybdate oranges. However, due to its poor solvent stability in some solvents, it is not recommended for baking systems. It is recommended for trade-sale paints, air-dry industrial coatings, water, solvent, and UV based printing inks.

DCL 7076 70% Leafing Aluminum Paste (CB-180-70) is a coarse paste widely used in asphalt-based roof coatings with an extremely high leafing value and brightness. 7076 is mainly recommended to be used in industrial coatings, it also meets the ASTM D962-II, C standards.

DCL 1692 Calcium Lithol Red, PR.49:2 is a semi-opaque, blue-shaded red that exhibits excellent brightness along with good tinting strength. This versatile product has good overall resistance properties and is widely used in various applications, especially industrial coatings and UV inks.

Vertal® 77 is a highly lamellar talc/carbonate mineral pigment that provides a unique balance of prime pigment spacing (opacity), film reinforcement, anti-cracking, and barrier properties to architectural and decorative coatings. This product is used whenever a higher brightness and lamellar mineral pigment are required.

ECOWHITE SU Universal Optical Brightener is a unique composition that improves the whiteness and brightness of paints even at very low concentrations (<0.05%), giving architectural paints a high-quality appearance. In accordance with the latest environmental requirements, this product has a low VOC content, typically <1 g/l.

Fluorescent dye for waterborne inks

Fluorescent dye for waterborne inks

Fluorescent UV-dye for plastics and solvent inks

Fluorescent UV-dye for plastics

Fluorescent dye for waterborne inks

IrisGlitter POLYESTER “HOLOGRAPHIC” BLU 141 is a line of glitters made from polyester film metallized aluminum with excellent color stability and brightness. IrisGlitter polyester glitter is available in different particle sizes that enhance the characteristics of brilliance or opacity.

Natural looking pearlescent pigments with a broad spectrum of bright colors and pearly sheen create unlimited combinations of possibilities for gorgeous designs. In contrast to traditional colored systems with standard silver pearls, the color series of Pearlescent Pigments ChemTech allows preparation of transparent systems with bright pure colors, which are achieved without losing lustrous highlights.

IrisPearl INTERFERENCE BLU 2225 (10-60 μm) is a line of pearlescent pigment based on natural mica, synthetic mica and glass. They are coated with titanium dioxide (anatase/rutile), iron oxide, oxides of other metals or other pigments that give them different effects and colors. IrisPearl pearlescent pigments are available in different particle sizes that enhance the characteristics of brilliance or opacity.

ARAGLO-phosphorescent pigments are rare earth alkaline mineral crystals. They are manufactured to the highest standards and can be charged an infinite number of times. Afterglow is up to 50 times longer than traditional phosphorescent zinc sulfide pigments. Their light fastness is also considerably higher when compared to zinc sulfide pigments

ARACO-30 fluorescent pigments are state of the art technology for waterborne or solvent-based formulations with improved color strenght compared to the ARACO-10 pigments

IrisGlitter POLYESTER “PES” VERDE 01 is a line of glitters made from polyester film metallized aluminum with excellent color stability and brightness. IrisGlitter polyester glitter is available in different particle sizes that enhance the characteristics of brilliance or opacity.

Natural looking pearlescent pigments with a broad spectrum of bright colors and pearly sheen create unlimited combinations of possibilities for gorgeous designs. In contrast to traditional colored systems with standard silver pearls, the color series of Pearlescent Pigments ChemTech allows preparation of transparent systems with bright pure colors, which are achieved without losing lustrous highlights.

ARASOL-30 fluorescent pigments are state of the art technology for waterborne or solvent-based spray can formulations with improved color strength

IrisGlitter POLYESTER “HOLOGRAPHIC” CAFFÈ 160 is a line of glitters made from polyester film metallized aluminum with excellent color stability and brightness. IrisGlitter polyester glitter is available in different particle sizes that enhance the characteristics of brilliance or opacity.

IrisGlitter POLYESTER “PES” ORO 40 is a line of glitters made from polyester film metallized aluminum with excellent color stability and brightness. IrisGlitter polyester glitter is available in different particle sizes that enhance the characteristics of brilliance or opacity.

ARAGEN-10 series, A New Generation of formaldehyde-free, fluorescent pigments for water-free formulations with significantly improved light fastness (2-10 times vs. Formaldehyde based pigments) and heat resistance compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in solvent and waterborne formulations.

Natural looking pearlescent pigments with a broad spectrum of bright colors and pearly sheen create unlimited combinations of possibilities for gorgeous designs. In contrast to traditional colored systems with standard silver pearls, the color series of Pearlescent Pigments ChemTech allows preparation of transparent systems with bright pure colors, which are achieved without losing lustrous highlights.

ARASOL-10 fluorescent pigments are state of the art technology for waterborne or solvent-based spray can formulations

IrisPearl SILVER 1183 (50-500 μm) is a line of pearlescent pigment based on natural mica, synthetic mica and glass. They are coated with titanium dioxide (anatase/rutile), iron oxide, oxides of other metals or other pigments that give them different effects and colors. IrisPearl pearlescent pigments are available in different particle sizes that enhance the characteristics of brilliance or opacity.

ARAGLO-phosphorescent pigments are rare earth alkaline mineral crystals. They are manufactured to the highest standards and can be charged an infinite number of times. Afterglow is up to 50 times longer than traditional phosphorescent zinc sulfide pigments. Their light fastness is also considerably higher when compared to zinc sulfide pigments

IrisPearl METALLIC BRUNO GIALLO 400 (10-60 μm) is a line of pearlescent pigment based on natural mica, synthetic mica and glass. They are coated with titanium dioxide (anatase/rutile), iron oxide, oxides of other metals or other pigments that give them different effects and colors. IrisPearl pearlescent pigments are available in different particle sizes that enhance the characteristics of brilliance or opacity.

ARACO-10 fluorescent pigments are state of the art technology for waterborne or solvent-based formulations, low/NON migration in PVC

Natural looking pearlescent pigments with a broad spectrum of bright colors and pearly sheen create unlimited combinations of possibilities for gorgeous designs. In contrast to traditional colored systems with standard silver pearls, the color series of Pearlescent Pigments ChemTech allows preparation of transparent systems with bright pure colors, which are achieved without losing lustrous highlights.

ARAGEN-10 series, A New Generation of formaldehyde-free, fluorescent pigments for water-free formulations with significantly improved light fastness and heat resistance compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in solvent and waterborne formulations.

IrisPearl SILVER 1181 (50-300 μm) is a line of pearlescent pigment based on natural mica, synthetic mica and glass. They are coated with titanium dioxide (anatase/rutile), iron oxide, oxides of other metals or other pigments that give them different effects and colors. IrisPearl pearlescent pigments are available in different particle sizes that enhance the characteristics of brilliance or opacity.

IrisGlitter POLYESTER “HOLOGRAPHIC” ORO 100 is a line of glitters made from polyester film metallized aluminum with excellent color stability and brightness. IrisGlitter polyester glitter is available in different particle sizes that enhance the characteristics of brilliance or opacity.

IrisGlitter POLYESTER “HOLOGRAPHIC” ROSSO 120 is a line of glitters made from polyester film metallized aluminum with excellent color stability and brightness. IrisGlitter polyester glitter is available in different particle sizes that enhance the characteristics of brilliance or opacity.

IrisGlitter POLYESTER “PES” ORO 05 is a line of glitters made from polyester film metallized aluminum with excellent color stability and brightness. IrisGlitter polyester glitter is available in different particle sizes that enhance the characteristics of brilliance or opacity.