Products in Functional Pigments: Low VOC

Sierralite 603HS is a high-purity chlorite with high alumina content and low iron oxide. Due to its unique properties, Sierralite 603HS is a superior product for ceramics and refractory materials requiring low thermal expansion and good thermal shock resistance. Sierralite® 603HS provides outstanding resistance to mud cracking in low-VOC flat latex paints.

Sierralite 252HS is a high-purity chlorite with high alumina content and low iron oxide. Due to its unique properties, Sierralite 252HS is a superior product for ceramics and refractory materials requiring low thermal expansion and good thermal shock resistance. Sierralite® 252HS provides outstanding resistance to mud cracking in low-VOC flat latex paints.

Syntran® OP 1133 is based on Interpolymer Corporation's "opaque polymer" technology, which can be used to replace a percentage of the titanium dioxide used in white paints while maintaining the same or similar coverage. The ideal reduction level of titanium dioxide is approximately 15% when using this technology. Higher reductions of titanium dioxide levels can be achieved, but you may experience a slight loss in the coverage of the paint.

Sierralite 402HS is a high-purity chlorite with a high alumina content and a low iron oxide content. Due to its unique properties, Sierralite 402HS is a superior product for ceramics and refractory materials requiring low thermal expansion and good thermal shock resistance.

Vertal® 7 is a highly lamellar talc/carbonate mineral pigment. Vertal® 7 provides a unique balance of prime pigment spacing (opacity), film reinforcement, and anti-cracking and barrier properties to architectural and decorative coatings. Vertal® 7 is especially suited for waterborne paints, universal primers, stain-blocking primers, sealers, and undercoaters. Vertal® 7 is also a good choice for low-VOC alkyd primers.

BRIOMICA® 82 is a dry-ground ultra-white fine mica powder.

BRIOMICA® 262 is a dry-ground ultra-white small mica flakes.

The Fine Zinc Powder 4P/32 grade is highly recommended for Paints and Plating.

The Fine Zinc Powder FH 400 grade is highly recommended for Paints and Plating.

The Fine Zinc Powder FH 1000 grade is highly recommended for organic or inorganic paints.

The Fine Zinc Powder 4P/64 grade is highly recommended for Paints and Plating.

The Fine Zinc Powder LARVIK SUPER FINE grade is highly recommended for organic or inorganic paints.

The Fine Zinc Powder LARVIK STANDARD 7 grade is highly recommended for Paints and Plating.

The Fine Zinc Powder 4P/16 grade is highly recommended for organic or inorganic paints.

The Fine Zinc Powder LARVIK SUPER EXTRA grade is highly recommended for organic or inorganic paints.

The Fine Zinc Powder FH 500 grade is highly recommended for organic or inorganic paints.

The Fine Zinc Powder FH 800 grade is highly recommended for organic or inorganic paints.

MICA-SOFT® 30 is a wet-ground silky pure mica small flakes.

The Fine Zinc Powder LARVIK STANDARD 5 grade is highly recommended for organic or inorganic paints.