Products in Acrylics: Flexography Ink

Ottopol SX-100 is a self-crosslinking acrylic emulsion for alkali resistance. This product has exceptionally good adhesion to substrates and is non-film-forming for glossy flexo and gravure inks. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.

Ottopol S-100 is a non-film-forming emulsion polymer for glossy flexo and gravure inks. This product has exceptionally good adhesion to vinyl and other non-porous substrates and provides non-curling properties. It has improved flow and leveling characteristics, which provide a high gloss finish.

Ottopol SX-30 is a self-crosslinking acrylic emulsion for flexo or gravure printed films. This translucent emulsion polymer exhibits resistance to alkalis and solvents, such as diluted alcohol solutions. It has excellent adhesion to substrates and provides excellent resolubility properties when applied.

Ottopol S-50 is an acrylic emulsion polymer with good adhesion to vinyl and other non-porous surfaces. It provides excellent resolubility properties for flexo and gravure printing applications, and the flow and leveling characteristics provide a high gloss finish. This resin also has non-curling properties.

Ottopol S-30 is an acrylic emulsion with a low glass transition temperature of -20°C. It is used for adhesion to plastic films, vinyl, and other non-porous substrates that require a hard film. This product is suitable for flexo or gravure printing applications.

Ottopol SX-75 is a self-crosslinking acrylic emulsion with good gloss for flexo and gravure printing. This product has alkali resistance and exceptionally good adhesion to vinyl and other non-porous substrates. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.

Ottopol S-75 is a film-forming acrylic emulsion polymer that is suitable for inks and coatings on paper and board. This product has good adhesion to vinyl and other non-porous substrates that require a hard film. It also provides excellent resolubility properties, a high-gloss finish, and non-curling properties.

DeCAL 4286 is a low molecular weight carboxylated acrylic copolymer with the capacity to carry very high levels of pigment and to provide maximum color development properties at these loadings. To obtain the full benefits of DeCAL 4286, it is essential to use the highest possible pigment binder ratios and the highest possible pigment loading.

DeCAL 4288 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment, providing maximum color development properties at these loadings. To obtain the full benefits, it's essential to use the highest possible pigment binder ratios and the highest possible pigment loading of DeCAL 4288. It's common to prepare a neutralized solution using either ammonia or monoethanolamine in formulations where slower drying or better resolubility is required.

DeCAL 4287 is a low molecular weight carboxylated acrylic copolymer that can carry very high levels of pigment and provide maximum color development properties at these loadings. It is the same polymer as DeCAL 4286 but is supplied as the monoethanolamine salt for use in formulations where slower drying or better resolubility is required.

DeCAL 4202 is an acrylic binder ideally suited for use in water-based flexographic inks for paper and corrugated board. It possesses excellent machine stability and resolubility, viscosity/pH stability, favorable viscosity/dilution curves, and excellent pigment wetting characteristics. It is supplied in its neutralized varnish form.

DeCAL 4201 is an acrylic binder ideally suited for use in water-based flexographic inks. The product exists as an alkali-soluble carboxylated copolymer emulsion but can also be supplied in its neutralized varnish form as DeCAL 4202. Inks prepared using DeCAL 4201 possess excellent machine stability/resolubility, viscosity/pH stability, favorable viscosity/dilution curves, and excellent pigment wetting characteristics.

Synprint AC 7150 is a water-based, alkali-solubilized styrene-acrylic copolymer used as an alkali-soluble resin in inks and overprint varnishes to improve gloss and leveling. It can also be used in pigment dispersions to improve color development and pigment dispersion gloss.

DeCAL 4214 is a waterborne transfer additive for flexographic inks. It improves definition by controlling the ink film weight. The addition level, usually between 2-4% as supplied on the total formulation, is determined by the pigments, binders, and machine characteristics. DeCAL 4214 also enhances the clean-down process on the press by increasing the open time.

Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.

Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.

Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.

Texicryl® 13-828 is a highly efficient alkali swellable emulsion designed for water-based printing ink formulations. The product has been designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.

Ottopol 25-30 is the ammonia-cut version of Ottopol 25-50E. This solution polymer has good adhesion to non-porous surfaces. Belonging to the Ottopol 25 Series, it is specifically designed for use as a grinding and letdown vehicle for water-based rotogravure and flexographic inks. It provides high gloss and excellent press stability. Ink and coating makers will benefit from the versatility of this series as a sole binder or component of high-gloss inks and overlay varnishes. These polymers are derived from the same monomer composition, and the dry resin is identical throughout the series.

Ottopol 25-50E converts into a low-cost solution polymer for pigment grinding and high-gloss flexo and gravure inks. Belonging to the Ottopol 25 Series, it is specifically designed for use as a grinding and letdown vehicle for water-based rotogravure and flexographic inks. It provides high gloss and excellent press stability. Ink and coating makers will benefit from the versatility of this series as a sole binder or component of high-gloss inks and overlay varnishes. These polymers are derived from the same monomer composition, and the dry resin is identical throughout the series.

Ottopol K-23 is a cationic acrylic copolymer emulsion used for alkali resistance and adhesion to non-porous substrates. It is designed for use as a grinding and letdown vehicle for water-based flexographic and rotogravure inks. It is also suitable for use as an overprint varnish.

EBECRYL® 3411, formulated by CASE Ingredients, is a solvent-free and VOC-free radiation-curable coating designed for paints and coatings and the printing and packaging industries. Emphasizing a low carbon footprint, it excels in applications like film coatings, overprint varnishes, and specialty coatings. Tailored for diverse printing methods such as flexography, gravure, lithographic, and screen printing, its liquid form ensures ease of application via methods like air knife, curtain, and rod coating. This product's clear appearance signifies its purity and quality, making it ideal for various ink types, including flexography, gravure, lithographic, and screen printing inks.

EBECRYL® LEO 10103 is a radiation-curable coating specifically designed for paints and coatings and the printing and packaging markets. Recognized for its bisphenol A-free, solvent-free, and VOC-free attributes, this sustainable product is ideal for packaging coatings, including film and foil coatings, as well as flexography and inkjet printing applications, serving both as a radiation-curable coating and ink.

SYNPRINT AC 5111 is an acrylic non-film-forming polymer based on a multiphase technology free of alpha- methyl-styrene. This is a proprietary process that combines two different types of polymers in the same polymer network. It allows a balanced combination of the different polymer properties and an overall improvement of the physical properties of both polymers. It is recommended to be used in combination with another resin such as SYNPRINT AC 5121 or similar. Features and Benefits: Hard emulsion Fast drying APEO-free Low odor Compliant with Swiss Ordinance, indirect food contact and FDA

SYNPRINT AC 9016 is an aqueous self-crosslinking pure acrylic polymer dispersion for use in waterborne coatings, flexographic, screen and gravure inks. Formulations containing SYNPRINT AC 9016 can be adapted to meet the requirements of a wide range of different applications. Features and Benefits: Good adhesion to various substrates Very flexible and block resistant Very good abrasion resistance Resistant to plasticiser migration

EBECRYL® 810 is a radiation-curable coating presented as a clear liquid tailored for diverse sectors, including paints and coatings, as well as printing and packaging. This bisphenol-a-free formulation underscores its commitment to sustainability with its low carbon footprint, solvent-free, and voc-free properties. Specifically, it serves applications in building and construction paints, wood finishes, industrial coatings such as coil and metal coatings, and furniture coatings. Additionally, it proves valuable in printing and packaging applications, facilitating tasks like packaging coatings, flexography ink, and inkjet printing. With versatile application methods like curtain coating, dip coating, gravure coating, roller, slot-die, and spray, it demonstrates compatibility with both metal and wood substrates.

EBECRYL® 5850 stands out as a high-performing, medium-viscosity bio-based diacrylate. Coatings and inks formulated with EBECRYL® 5850, cured through ultraviolet light (UV) or electron beam (EB) energy, demonstrate exceptional reactivity along with impressive hardness and scratch resistance. This versatile product finds applications in radiation-curable coatings, inkjet inks, varnishes, and flexography inks. Noteworthy features include high gloss, faster cycle time, and low-temperature curing. Claims labels such as bio-based, bisphenol-A-free, and low carbon footprint (PCF).

VANCRYL® 800 is a solvent-free, waterborne coating available as a clear, light yellow liquid. Tailored for the paints and coatings and printing and packaging sectors, it excels in applications such as packaging coatings and flexography inks, particularly when applied using the gravure coating method.

EBECRYL® 3721, developed by CASE Ingredients, is a clear liquid radiation-curable coating with a low carbon footprint (PCF). This solvent-free and VOC-free product caters to the automotive and transportation, paints and coatings, and printing and packaging sectors. It's apt for applications such as automotive OEM coatings, wood finishes, and various printing methods like flexography, gravure, offset, lithographic, and screen printing.

VANCRYL® 450 is a specialized solvent-free colloidal dispersion tailored for the paints and coatings sector as well as the printing and packaging industry. This product is notably employed as a coating within packaging applications and is particularly adept for flexography and inkjet printing processes, offering versatility and performance.

EBECRYL® 3702, developed by CASE Ingredients, is a clear liquid suited for radiation-curable coatings in the paints and coatings and printing and packaging sectors. Highlighting its eco-conscious design, the product boasts a low carbon footprint (PCF) and is both solvent-free and VOC-free. It finds applications in packaging coatings, including flexography and inkjet printing. With versatile coating methods like air knife, curtain, gravure, and roller coating, it's compatible with plastic substrates and employs radiation cure technology.