Products in Epoxies: Bisphenol Epoxy Resins

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

EBECRYL® 605/20 by CASE Ingredients offers a radiation-curable coating with a low carbon footprint (PCF), ensuring solvent-free and VOC-free solutions. Tailored for the paints, coatings, and printing sectors, it is adept for building, construction, and industrial applications on wood substrates. This liquid coating is applied using methods such as curtain coating, gravure, and roller techniques.

EBECRYL® 606 is a modified diacrylate ester of bisphenol an epoxy resin, known for its light color, rapid cure response, and enhanced pigment wetting. EBECRYL® 606 is widely utilized in UV/EB applications, including inks, coatings, and overprint varnishes. Key features encompass long pot life, good pigment wetting, improved hardness, high gloss, enhanced chemical resistance, faster cycle time, low-temperature curing, and low energy consumption. It is applied in wood coatings, furniture coatings, and industrial coatings using methods such as curtain coating, gravure coating, lithography, roller application, and screen coating.

EBECRYL® 640/20 TO is a modified diacrylate ester of bisphenol A epoxy resin. Films cured by ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, gloss, and excellent solvent resistance, typical of epoxy resins. This product is widely used in UV/EB applications, including inks, coatings, and overprint varnishes. It features low energy consumption, long pot life, good pigment wetting, improved hardness, high pigment loading, high gloss, improved chemical resistance, faster cycle time, and low-temperature curing. Suitable application methods include gravure coating, lithography, roller coating, and screen coating.

EBECRYL® 646 is a clear liquid modified diacrylate ester of bisphenol A epoxy resin, diluted with 25% of trimethylolpropane triacrylate. This product, when cured by UV or EB, exhibits high surface hardness, gloss, and excellent solvent resistance typical of epoxy resins. It is recommended for various applications, including overprint varnishes, lithographic and screen inks, coatings for paper, paperboard, wood, chipboard, rigid plastics, paper upgrading, laminating adhesives, and wood sealers and topcoats. EBECRYL® 646 features long pot life, good pigment wetting, improved hardness, high gloss, improved chemical resistance, faster cycle time, low-temperature curing, and low energy consumption. The application methods include curtain coating, gravure coating, lithography, roller coating, and screen coating. Additionally, it is suitable for textile manufacturing and other packaging coatings, particularly overprint varnishes.

EBECRYL® 608, from CASE Ingredients, is a radiation-curable coating featuring a low carbon footprint (PCF) and is solvent-free and VOC-free. Tailored for the paints, coatings, and printing industries, it serves applications such as building and industrial coatings on wood, along with packaging coatings. This clear liquid is aptly applied using methods like curtain, dip, gravure, roller, and slot-die techniques.

EBECRYL® 657, developed by CASE Ingredients, is a radiation-curable coating with a low carbon footprint (PCF), being both solvent-free and VOC-free. Designed for diverse markets, including industrial applications, paints and coatings, and printing and packaging, this dark, clear liquid finds its niche in various sectors. It excels in applications such as building coatings on wood, leather, and textiles, packaging coatings, overprint varnishes, and specialized coatings. Utilize this product efficiently through curtain coating and roller methods for optimal results.

EBECRYL® 648 is a modified diacrylate ester of bisphenol A epoxy resin diluted with 25% of oligotriacrylate (OTA 480) diluting oligomer. This product is characterized by its light color, fast cure response, and improved pigment wetting. EBECRYL 648 is widely used in UV/EB applications, including inks, coatings, and overprint varnishes. It features improved hardness, long pot life, faster cycle time, high gloss, low-temperature curing, improved chemical resistance, and low energy consumption. Applications for EBECRYL® 648 include wood coatings and finishes, furniture coatings, and industrial coatings.

EBECRYL® 6040 is a modified diacrylate ester of bisphenol A epoxy resin, recognized for its low odor, light color, low irritancy, and rapid cure response. Films cured by ultraviolet light (UV) or electron beam (EB) showcase high surface hardness, elevated gloss, low residual odor, and excellent solvent resistance, typical of epoxy resins. This product is particularly useful for overprint varnishes. Noteworthy features include improved hardness, long pot life, faster cycle time, high gloss, low-temperature curing, improved chemical resistance, and low energy consumption. It is applied in wood coatings, furniture coatings, and industrial coatings for radiation-curable formulations.

EBECRYL® 645 is a modified diacrylate ester of bisphenol A epoxy resin, diluted with 25% tripropylene glycol diacrylate (TPGDA) monomer. It is well-suited for various applications, including overprint varnishes, coatings for paper, paperboard, wood, chipboard, rigid plastics, paper upgrading, laminating adhesives, wood sealers, and topcoats. Notable features include long pot life, good pigment wetting, improved hardness, high gloss, enhanced chemical resistance, faster cycle time, low-temperature curing, and low energy consumption. Additionally, EBECRYL® 645 carries labeling claims such as low carbon footprint (PCF), solvent-free, and VOC-free.

Kukdo Chemical KD-4014 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for applications of high performance powder coating, especially FBE(Fusion Bonded Epoxy coating). The most advantage of these products is that residual bisphenol-A content is the less than one percent by weight. Also, these products have excellent performance of block resistance, chemical resistance and mechanical properties.

Razeen® LR 2351 is a general purpose modified epoxy resin based on Bisphenol A & Bisphenol F. Razeen® LR 2351 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 2351 is meets the relevant requirements of the FDA listing.

RIKARESIN BPO-20E is used in the fields of adhesives, paints and electricity to improve toughness, flexibility and adhesion. Liquid epoxy resin with bisphenol A skeleton. Since it has excellent impregnation properties, it is also used for FRP molding and casting. Improves heat cycle property, thermal shock resistance and shock resistance.

Razeen® LR 2783 is a low viscosity epoxy resin based on Bisphenol A\F modified with aliphatic glycidyl ether.

Triune Chemicals and Materials LE-828 is standard BPA type epoxy product which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

CHS-EPOXY 514 is a Bisphenol A/F resin modified by monofunctional reactive diluent.

Epilox T 19-27 is a liquid and solventless blend of standard bisphenol A and bisphenol F epoxy resins with good resistance to crystallization.

Araldite® GT 6099 N is an unmodified high molecular weight epoxy resin based on Bisphenol A.

Razeen® SL 4071X75 is a medium molecular weight epoxy resin based on Bisphenol A as solvent cut 75% in Xylene.

Razeen® SR 5334 is a high flow, solid, epoxy resin based on bisphenol A containing 2.5% flow agent.

Araldite® GT 7071 N is a low melting solid unmodified epoxy resin based on Bisphenol A. with narrow molecular weight distribution. Araldite® GT 7071 N can be added to alkyd/amino stoving enamels to enhance their quality and to powder coatings e.g. to improve their flow.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

Araldite® GT 6084 is an unmodified solid epoxy resin based on Bisphenol A.

Epilox A 17-01 is a colorless, low-molecular-weight bisphenol A epoxy resin.

Razeen® LR 1150 is a general purpose unmodified medium viscosity epoxy resin based on Bisphenol A. Razeen® LR 1150 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 1150 is meets the relevant requirements of the FDA listing.

CamCoat EPN 1180 by Champion Advanced Materials (Singhania Group) is multi-functional phenol novolac resin. It offers high temperature and excellent chemical resistance. CamCoat EPN 1180 can be used in coatings.

Triune Chemicals and Materials FE862(870) is bisphenol – F liquid epoxy resins which is available as colorless or buff transparent liquid.

Araldite® GY 6020 is a high viscose unmodified resin based on Bisphenol A.

Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with aromatic glycidyl ether.

Razeen® SR 5061 is a low melting solid, unmodified epoxy resin based on Bisphenol A with tighter molecular weight distribution than SR 5071.

CeTePox® 153 R is a reactive diluted Bisphenol A liquid resin, which has a low viscosity with good chemical resistance.

Triune Chemicals and Materials LE-828S is non-crystallize resin which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

Epilox A 19-04 is a low molecular weight bisphenol A epoxy resin with medium viscosity.