Products in Epoxies: Steel

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SYNTHALAT A 200 is an acrylic/epoxide resion cross-linked with polyisocyanate. It is used in combination with aliphatic polyisocyanates for air-drying and oven-drying two-component primers with excellent filling properties, quick drying, and good adhesion to steel, aluminum, and zinc, which gives good results in condensed moisture tests and salt spray tests. Wherever there is a requirement for maximum corrosion resistance and adhesion, this type of 2-component primer is used. It has applications in industrial maintenance, primers and lacquers, and metal coatings.

Epojet is two-component, super-fluid epoxy resin for injections and anchorings.

Kukdo Chemical KSR-900 is a high performance adhesion epoxy resin.

Foamjet F is ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject to weal water ingress.

Kukdo Chemical KSR-177 is a High Performance Adhesion Epoxy Resin.

Graxy™ 501 is a type of low molecular weight solid modified epoxy resin polymerized by graphene, epoxy resin and other ingredients. It is designed for use in the production of low zinc content (40%) anti-corrosive primers..

Kukdo Chemical KSR-276M70 is a High Performance Adhesion Epoxy Resin.

Kukdo Chemical KSR-176X90 is a High Performance Adhesion Epoxy Resin.

Graxy™ 503 is a type of low molecular weight solid modified epoxy resin polymerized by graphene, epoxy resin and other ingredients. It is designed for use in the production of graphene zinc anti-corrosive primers..

Graxy™ 502 is a type of low molecular weight solid modified epoxy resin polymerized by graphene, epoxy resin and other ingredients. It is designed for use in the production of graphene zinc anti-corrosive primers..

Epojet LV is two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces.

Graxy™ 601M is a type of graphene mixture. It is designed for use in the production of water-based low zinc content anti-corrosive primers..

Acrylic/epoxide resion cross-linking with polyisocyanate

Kukdo Chemical KSR-277EK70 is a High Performance Adhesion Epoxy Resin.