Products in Resins & Binders: Polyamides

Dry Cell Battery Sealant

Dry Cell Battery Sealant

Dry Cell Battery Sealant

Dry Cell Battery Sealant

Dry Cell Battery Sealant

Casamid™ 831 is a co-solvent thermoplastic polyamide resin designed for use in gravure inks and lacquers. CASAMID 831 is the highest viscosity grade of the standard range of CASAMID non- reactive polyamide resins. The composition of CASAMID 831 is similar to that approved under FDA 175.320-"Resinous and polymeric coatings for polyolefin films."

Casamid™ 1914 is an aqueous solution of a thermoplastic, alcohol-soluble polyamide resin. The base polymer has a high acid value and has been made water-soluble by neutralization with a volatile amine. Upon evaporation of the water and the amine, the solution dries to give a water-resistant film.

Casamid™ 873 is a general purpose low odor alcohol soluble polyamide resin for flexographic packaging inks. Optimum performance requires higher levels of nitro cellulose than Casamid™ 874.

Casathix™ 2092 is a non-reactive polyamide resin designed to impart structure into alkyd resins. It is used where high gel strength and gloss are required. It is lower in viscosity than SP1898.

Casamid™ 874 is a general purpose alcohol soluble polyamide resin for flexographic packaging inks. Lower levels of nitro cellulose are required for optimum performance than with Casamid™ 873.

Casamid™ 1752 is a co-solvent thermoplastic polyamide resin. It is a high viscosity resin similar to our CASAMID 831 but has a slightly lower gel recovery temperature.

Casathix™ 1898 is a non-reactive polyamide resin designed to impart structure to alkyd resins. It is used where gel strength and gloss are required.

Casamid™ 879 is a general purpose, alcohol soluble, thermoplastic polyamide resin for flexographic packaging inks.

Casamid™ 872 is a medium viscosity alcohol soluble polyamide resin for use in flexographic inks and lacquers, where water resistance is less important.

Casamid™ 833 is a co-solvent thermoplastic polyamide resin designed for use in packaging inks and lacquers. Compared to Casamid™ 831, Casamid™ 833 has much improved solubility characteristics, compatibility with nitrocellulose and greater tolerance to alcohol and polar solvents.

NYCOBOND XN-287 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a significantly lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

NYCOBOND XN-187 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

Casamid™ 876 is an alcohol soluble polyamide resin designed for use in general purpose flexographic and gravure printing inks. Modification with nitrocellulose is required for optimum performance.

UNI-REZ 2671 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2671 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

SP-160 is a 2K EPOXY FINISH GOLDEN YELLOW .

Fujian Zhongde Energy Co-Solvent Polyamide Resin 3301 is a alcohol-soluble polyamide resin.

BRASMIDE R 05 is a reactivc polyamide resin with low viscosity.

Dromide® 940 is a co-solvent soluble polyamide resin suitable for flexographic and gravure printing inks and over printing lacquers, this resin provides good glossy sharp prints.

Dromide® 933 is a co-solvent soluble polyamide resin suitable for flexographic and gravure printing inks and over printing lacquers, this resin provides good glossy sharp prints.

BRASMIDE R 40 is a reactivc polyamide resin with low viscosity.

UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 2294 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2294 has a moderate softening point and low viscosity which allows for a lower application temperature and fast set.

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

Dromide® 939 is a co-solvent soluble polyamide resin specially developed for Untreated HDPE and polypropylene woven sack bags. This is also soluble in hydrocarbon and alcohol blend.

Fujian Zhongde Energy Co-Solvent Polyamide Resin 3303 is a alcohol-soluble polyamide resin.

BRITOL 777 (Alcohol Soluble) is used in Flexo & Gravure Inks for Treated Polyethylene BOPP, PE, HDPE (Woven Sacks) N.C., Compatible. Alcohol Soluble.

Finomide 1130 is a polyamide resin co-solvent soluble which is high-molecular-weight polymers which feature amide linkages along the molecular chain. It is a solid thermoplastic resin and non-reactive type.

UNI-REZ 147 polyamide resin is an alcohol soluble / co-solvent type resin offering low temperature gel resistance and good compatibility with modifying resins. UNI-REZ 147 polyamide resin offers better blocking and gloss properties than other modified co-solvent types. It has good solvent compatibility, alcohol reducibility and compatibility to nitrocellulose.

Finomide 1135 is a polyamide resin co-solvent soluble which is high-molecular-weight polymers which feature amide linkages along the molecular chain. It is a solid thermoplastic resin and non-reactive type.

TOHMIDE 90 is a fatty polyamide resin synthesized by a polycondensation of mainly the dimerized fatty acid and the alkylenepolyamines.

TOHMIDE 393 is a fatty polyamide resin whose major applications are in the rotogravure printing inks and as the “gelling agent” in thixotropic alkyd varnishes. The followings are the major characteristics of the TOHMIDE 393 as used in a rotogravure ink formulation (a). excellent adhesion to a wide variety of substrates, such as; polyethylene (treated,) polypropylene (treated,), cellophane, aluminum fall and glassines. (b). rub resistance. (c). blocking and smearing resistance. (d). high water resistance. (e). high gloss.