Products in Resins & Binders: Styrenics

Kraton D1116 A is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied from Europe in the physical form identified below. Kraton D1116 AT - supplied as a porous pellet dusted with talc Kraton D1116 ASM - supplied as a powder dusted with silica Kraton D1116 A IM - supplied as a powder dusted with inorganic dusting agents for supply to the North American market Kraton D1116 A is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Magonarez Hydroxystyrene resins are used for plastic and metalfinishes.

Emulprene 10101A is a cross-linked emulsion styrene-butadiene copolymer with divinyl-benzene, using a mix of rosin and fatty acid as emulsifier. It is coagulated with Aluminum-acid and stabilized with a non-staining antioxidant. It is produced in accordance with good manufacturing practices and complies with FDA 21 CFR §175.300, §177.1210 and §178.3910 for use in food contact applications.

Kraton D1124 P is a clear, branched copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 PT - supplied as a dusted dense pellet Kraton D1124 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Emulprene 1006CR is a crumb hot emulsion styrene-Butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 7% and 12% of Calcium Carbonate is used as dusting agent.

Emulprene 1011CR is a crumb of hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant. This rubber is produced as free flowing dusted crumb which eliminates the need for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

Emulprene 1013ACR is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. This rubber is produced in free flowing crumb form which eliminates the need for milling, cutting, or grinding equipment. Between 7-12% of Calcium Carbonate is used as dusting agent.

Hot polymerized SBR 1013 elastomer is used in adhesives, tire liners, and mechanical rubber goods, including auto mounts and household products.

Hot polymerized SBR 1006C elastomer is used in applications such as adhesives, mechanical rubber goods, floor tile, cove base and brake friction products.

Calprene H6110 is a 70/30 ethylene-butylene/styrene thermo-plastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance. Calprene H6110 meets the requirements of the USP class VI plastic classification.This product is available in: - Calprene H6110 porous crumbs. - Calprene H6110 P powder form dusted WITH amorphous silica. - Calprene H6110 PH powder form WITHOUT any dusting agent.

Kraton D-1161 polymer is a clear linear triblock copolymer based on styrene and isoprene, with bound styrene of 15% mass. Kraton D-1161 polymer is used in fomulating adhesives ,sealants and coatings, and may also be used as a modifier of bitumen.

Hot polymerized SBR 4503C is used in construction mastics, adhesives and sealants intended for installing panels, furring strips, wood molding, plywood or hardboard. It offers a strong and instant bond that retains precise placement. It exhibits excellent shear strength and yields a stiffer film when used in tape, PSA or label application.

Emulprene 1011 is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Emulprene 1011AH is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Emulprene 1006 is a hot emulsion styrene-butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant.

SPCRYL LOP-H is a low molecular weight acrylic resin for use in high solids water based overprint varnishes.

Calprene 710 is a 70/30 linear structure butadiene/styrene thermoplastic copolymer, polymerized in solution.This product is presented in porous pellet form that allows rapid oil absorption.It is stabilized with a non-staining antioxidant system (free of TNPP), that is FDA approved for use in food contact applications. It is essentially gel free and very transparent.

Hot polymerized SBR 1011AE elastomer is recommended for adhesives, pressure sensitive tape and label, and mechanical rubber goods applications where nonstaining and high tack is essential.

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.

Calprene H6120 is a 68/32 ethylene-butylene/styrene thermo-plastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance. Calprene H6120 meets the requirements of the USP class VI plastic classification.This product is available in: - Calprene H6120 porous crumbs. - Calprene H6120 P powder form dusted WITH amorphous silica. - Calprene H6120 PH powder form WITHOUT any dusting agent.

Emulprene 1500A is a styrene-butadiene copolymer, cold polymerized using a rosin acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. The product does not contain nitrosamine promoters.

Calprene 419 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and has a radial structure.This product is available in: - Calprene 419 porous crumb. - Calprene 419M powder form dusted with amorphous silica.

Calprene 501 is a 69/31 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure.This product is available in: - Calprene 501 porous crumb. - Calprene 501C porous pellet. - Calprene 501M powder form dusted with amorphous silica.

Hot polymerized SBR 1009C is recommended for use in calendared products and extruded mechanical goods. It is also widely used in sealants and adhesives.

Emulprene 1012CR is a crumb version of a high viscosity hot emulsion styrene-butadiene copolymer, polymerized using fatty acid emulsifier and coagulated with salt-acid. It is very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

SPCRYL 170 is a high molecular weight acrylic resin designed to improve color and gloss of pigment dispersion without affecting stability of ink.

Calprene 718 is a new 75/25 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a radial structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color.Calprene 718 offers good processability and develops softer compounds when compared to other linear SBS grades. This grade has a 10% of diblock content.Calprene 718 is supplied in porous pellets.

Calprene 500 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure.This product is presented in porous pellets and has excellent optical properties due to its clarity.It is stabilized with a non staining antioxidant system FDA approved for use in food contact applications and is essentially gel free with a very clear color.C-500 is used in adhesive formulation, in thermoplastic injected shoe sole formulations, and transparent compounds.

SPCRYL 160 is a high molecular weight acrylic resin designed to improve color and gloss of pigment dispersion without affecting stability of ink.

Kraton D1113 K is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below. D1113 KT - supplied as a dusted pellet Kraton D1113 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Emulprene 1502A is a styrene-butadiene copolymer, cold polymerized using fatty and rosin acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. The product does not contain nitrosamine promoters.

Calprene 7318 is a linear block copolymer of styrene and butadiene, having 32% styrene content, most of it forming a polystyrene block, which gives the polymer a thermoplastic behavior.It has a non-staining antioxidant system; FDA approved for use in food contact applications and is essentially gel free with a very clear color.Calprene 7318 is BHT* and nonylphenol free SBS, according to existent food contact regulations (Europe and America)Calprene 7318 is specially designed for technical compounds and adhesives.It is presented as free flowing porous crumb making easy its handling and dissolution.*(BHT content in pure polymer less than 30ppm).

Kraton D1152 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1152 ES - supplied as porous pellets dusted with amorphous silica Kraton D1152 ET - supplied as porous pellets dusted with talc Kraton D1152 ESM - supplied as powder dusted with amorphous silica Kraton D1152 E is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Calprene H6140 is a 69/31 ethylene-butylene/styrene ther-moplastic copolymer, polymerized in solution and having a linear structure with excellent ozone resistance.This product is available in: - Calprene H6140 porous crumbs. - Calprene H6140 P powder form dusted WITH amorphous silica. - Calprene H6140 PH powder form WITHOUT any dusting agent.

Calprene 711 is a new 70/30 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a radial structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 711 is a BHT* and nonylphenol free SBS, FDA approved and especially suitable for food contact applications.Calprene 711 develops high viscosity compound and requires being formulated with complementary antioxidants. (Consult our Technical Service Department for supporting information),Calprene 711 is supplied in porous crumb.*(BHT content in pure polymer less than 30ppm).

Hot polymerized SBR 1006 elastomer is used in applications such as adhesives, mechanical rubber goods, floor tile, cove base and brake friction products.