Products in Resins & Binders: Vinyl Acetate Ethylene (VAE) Copolymer

VINNAPAS® 827 ED is an all-round construction dispersion for two-component dry mix mortars and ready-to-use dispersion-based construction products. It is specifically suitable for ETICS/EIFS applications as a cement admix dispersion or sole binder in ready-to-use ETICS/EIFS base or top coats. VINNAPAS® 827 ED is a semi-flexible, medium-particle-size synthetic resin dispersion based on a terpolymer of vinyl acetate, ethylene, and vinyl chloride, and it contains a protective colloid.

VINNAPAS® EP 4600 is a vinyl acetate-ethylene (VAE) copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +5°C. This dispersion was specifically formulated to have a low viscosity and high solids content, allowing it to accommodate high levels of fillers.

VINNAPAS® 315 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +17 °C, which contributes to its exceptional heat resistance and high tensile strength. Specifically formulated as a base for high-speed packaging adhesives, VINNAPAS® 315 demonstrates remarkable wet tack and thickening responses. Its poly(vinyl alcohol) stabilization and impressive mechanical stability ensure smooth machining and enable its utilization in various roll, extruder, or spray applications.

VINNAPAS® EZ 3112 is a protective colloid-stabilized dispersion of a vinyl acetate, ethylene, and vinyl ester terpolymer. It is free from alkyl phenol ethoxylate (APEO)-containing compounds. It offers excellent adhesion to substrates such as structural steelwork. VINNAPAS® EZ 3112 exhibits significant foam development and expansion, and it has higher hydrophobicity compared to standard VAEs. Additionally, it achieves fire resistance classes up to F120.

VINNAPAS® 401 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of -15 °C. It is specifically formulated to provide easy clean-up, extended open time, and exceptional film flexibility. VINNAPAS® 401 is commonly used as a base for adhesives, offering a well-rounded combination of excellent wet tack, fast setting, strong adhesion, and heat resistance.

VINNAPAS® EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It exhibits good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints with high cohesion. It is suitable for a range of applications, including adhesives for paper packaging and PVC furniture foil adhesives.

VINNAPAS® EP 645 is a specially modified vinyl acetate-ethylene (VAE) copolymer dispersion designed to provide excellent adhesion to a wide range of difficult-to-bond substrates. The dispersion is stabilized with polyvinyl alcohol to ensure good wet tack, fast setting speed, and excellent machinability.

VINNAPAS® EP 1 is a plasticizer-free polymer dispersion based on vinyl acetate and ethylene monomers. It exhibits good adhesion to various plastic surfaces, providing a permanently flexible glue line. It is particularly suitable for applications such as adhesives for paper packaging and PVC furniture foil adhesives.

VINNAPAS® EN 421 is an aqueous, self-crosslinking copolymer dispersion of vinyl acetate and ethylene, manufactured without the use of alkyl phenol ethoxylate (APEO)-based materials. It is particularly suitable for formulating heat-curing or self-curing adhesives. This dispersion offers the softness and flexibility typical of a vinyl acetate-ethylene copolymer adhesive base.

VINNAPAS® EF 8001 (CTY) is an aqueous dispersion of a vinyl acetate-ethylene copolymer. It serves as a superior alternative to vinyl-acrylic copolymers, offering both enhanced performance and environmental benefits. This product possesses a low glass transition temperature (Tg) as well as a low minimum film formation temperature (MFFT).

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® 561 ED is a low Tg polymer dispersion based on vinyl acetate and ethylene. It exhibits excellent elongation, flexibility, and water resistance, making it ideal for numerous construction applications. VINNAPAS® 561 ED exhibits high filler loading capabilities and is compatible with both fully and partially hydrolyzed polyvinyl alcohols, as well as other synthetic latex polymer dispersions (such as styrene/acrylic and pure acrylic dispersions).

VINNAPAS® 418 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a soft hand is required. The dispersion combines moderately high solid content with a low viscosity, a combination that permits the addition of very high filler loadings, resulting in adhesive formulations with high solid contents.

VINNAPAS® EP 706K (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, offering improved adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706K (NJG) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® 323 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of +23 °C. It is specifically developed as a fast-setting and high-heat-resistant dispersion, offering compatibility with fully hydrolyzed PVOH. VINNAPAS® 323 is designed as a base for high-speed packaging applications. It demonstrates excellent wet tack, fast setting properties, and a moderate response to plasticizer thickening.

VINNAPAS® CEZ 3031 is a medium-particle-size, protective colloid-containing aqueous dispersion of a terpolymer of vinyl acetate, ethylene, and vinyl chloride. The principal feature of VINNAPAS® CEZ 3031 is its wide range of uses in coating systems containing opacifying pigments. The dispersion is low in odor and is produced without the use of alkylphenol ethoxylate (APEO)-containing compounds.

VINNAPAS® EP 3455 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers very high scrub resistance, excellent hiding power, and exceptional pigment binding ability.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

VINNAPAS® EP 708 (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion. It demonstrates excellent machinability and strong wet tack. Additionally, it offers enhanced adhesion to films, including polyvinyl chloride. VINNAPAS® EP 708 (NJG) is chemically stable at both high and low pH. It has very high plasticizer and solvent viscosity thickening responses. It is compatible with an assortment of resins, solvents, plasticizers, and other modifiers, as well as the other VINNAPAS® EP dispersions.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

VINNAPAS® EP 707K (ULS) offers excellent elongation, water resistance, and flexibility. It features the fastest setting speed among the VINNAPAS® EP product lines. Thanks to its low viscosity and rapid setting speed, VINNAPAS® EP 707K (ULS) is highly suitable for high-speed packaging machine applications.

VINNAPAS® EZ 222 is a vinyl acetate-ethylene (VAE) copolymer dispersion stabilized with hydroxyethyl cellulose and surfactant. It has a glass transition temperature (Tg) of +18.0°C. This dispersion offers excellent scrub resistance, good flow and leveling properties, and low viscosity. It has a high solid content and is produced without the use of APEOs.

VINNAPAS® EF 104 is a vinyl acetate-ethylene copolymer (VAE) dispersion stabilized with surfactants. It has a glass transition temperature (Tg) of 14 °C and is designed as a high-performance and cost-effective binder for paperboard and specialty paper coating applications. This polymer dispersion offers a good rheology response when formulated at high coating solids. It also provides excellent dry pick and good to excellent wet pick performance.

VINNAPAS® EP 756 is a vinyl acetate-ethylene copolymer dispersion with a low viscosity and low levels of formaldehyde and free VAM residue. It demonstrates excellent machinability and strong wet tack. Additionally, it offers good adhesion to various plastic surfaces, allowing for the creation of permanently flexible adhesive joints with high cohesion.

VINNAPAS® EP 758 is a high-viscosity, high-solid vinyl acetate-ethylene copolymer dispersion with low levels of formaldehyde and free VAM residue. It offers excellent machinability and strong wet tack. VINNAPAS® EP 758 demonstrates chemical stability at both high and low pH levels. It is also compatible with various resins, solvents, plasticizers, and other modifiers, as well as other VINNAPAS® EP dispersions.

VINNAPAS® EP 8178 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene (VAE) copolymer dispersion. It has a glass transition temperature (Tg) of approximately -3 °C. This dispersion is specifically designed as a high-performance, ultra-high-solids dispersion for weather-resistant air barriers. It offers excellent water resistance, ideal mechanical properties, and the capability to handle high extender loadings.

VINNAPAS® 547 ED (NJG) is a versatile polymer dispersion with high water resistance and excellent compatibility. This product is a dispersion based on vinyl acetate and ethylene. VINNAPAS® 547 ED (NJG) is produced without using formaldehyde donors and without adding plasticizers or organic solvents.

VINNAPAS® EP 6411 is an aqueous dispersion containing a 50% copolymer of vinyl acetate and ethylene. It is produced without the use of plasticizers and is currently being introduced for industrial use. This product offers good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints.

VINNAPAS® 400 H is a poly(vinyl alcohol)-stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a higher-viscosity, high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in achieving much higher formulation viscosities.

VINNAPAS® EF 8300 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. It was specifically formulated as a high-performance polymer for interior architectural coating formulations, offering environmental advantages. This technology serves as an alternative to various other technologies, including vinyl acrylic/acrylic blends, vinyl acrylics with wet adhesion, and pure acrylics.

VINNAPAS® 400 EN-Test is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in an extremely wide variety of applications.

VINNAPAS® 510 ED is a polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. VINNAPAS® 510 ED offers several advantages in building chemical applications as well as in general adhesives. To achieve optimum weathering resistance, opaque pigments should be used to ensure adequate pigmentation.

VINNAPAS® EP 7000 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of approximately -3°C. It has been specifically developed as an ultra-high-solids dispersion, providing superior adhesion, wet tack, and setting speed compared to conventional VAE dispersions.

VINNAPAS® EP 6420 is an aqueous dispersion containing a 55% copolymer of vinyl acetate and ethylene. It is produced without the use of plasticizers and is currently being introduced for industrial use. This product provides good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints.

VINNAPAS® eco EF 3777 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds, organic solvents, or plasticizers. Due to its low VOC content, VINNAPAS® eco EF 3777 is ideal for manufacturing low-emission products.

VINNAPAS® EP 724 is a vinyl acetate-ethylene copolymer dispersion with a glass transition temperature of approximately +19°C, which is the highest among the VINNAPAS® EP product lines. It possesses exceptional cohesive strength (heat resistance) and tensile strength. The dried film formed by VINNAPAS® EP 724 is more flexible than PVAc polymer while maintaining good tensile strength and high creep resistance. Furthermore, the dried film exhibits low levels of tack.