Products in Resins & Binders: Asphalt

Domemul AA 9269 is a pure acrylic APEO-free emulsion designed for waterborne road marking coatings. The resin can also be used for fast drying waterborne coatings, including high humidity and low temperature environments.Features & BenefitsAcrylic emulsion for roadmarking paintsVery fast dryingGood water resistanceGood durability, non yellowingGood adhesion on asphalt, concrete

Rovene 4220 is a non-carboxylated styrene-butadiene emulsion recommended for use in formulations directed at contact or cold seal applications. Rovene 4220 can also be used in architectural adhesives including many types of flooring adhesives and special contact adhesives. Rovene 4220 can be used as a polychloroprene and natural latex extender if properly formulated. When working with Rovene 4220, it is important to remember that it may be tackified, thickened and blended with other non- carboxylated and carboxylated emulsions. This flexibility allows for the formulation of a wide variety of adhesives with custom performance properties.

Domemul AA 7601 is an acrylic APEO-free emulsion designed for waterborne road marking coatings and paints for metal surfaces. The resin can also be used for fast drying waterborne coatings, also in high humidity and low temperature environments.Features & BenefitsWaterborne road marking coatingsVery fast dryingExellent adhesion on asphalt, concrete, metal

Rovene 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. It is used in the formulation of general purpose labels and construction adhesives which provide excellent adhesion to a variety of substrates. Rovene 4310 has compatibility with a wide variety of commercial tackifier resins and has excellent filler tolerance.

Rovene 4125 is a styrene-butadiene emulsion polymer recommended for applications where a primer-sealer that provides adhesion between asphalt and other various surface treatments is needed. Rovene 4125 has been used in recreational surface applications such as tennis court and running track coatings.

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.

Domacryl 856 60 T is an air drying thermoplastic acrylic resin developed for the preparation of the pigmented and transparent coatings with high solid content. This resin is recommended for spray-application paint for road marking, rapid drying with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationGood adhesion to asphalt, concrete and metal

Domacryl 857 50 BAc is an air drying polyacrylic resin developed for the preparation of the pigmented and transparent coatings for metal. This resin is also recommended for spray-application paint for road marking, rapid drying with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationRapid dryingGood adhesion to asphalt, concrete and metal

Domacryl 855 60 T is an air drying thermoplastic acrylic resin for the preparation of the pigmented and transparent coatings. This resin is recommended for spray-application paint for road marking, with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationGood adhesion to asphalt, concrete and metal

Domacryl 857 55 X is an air drying polyacrylic resin developed for the preparation of the pigmented and transparent coatings for metal. This resin is also recommended for spray-application paint for road marking, rapid drying with good adhesion to asphalt, concrete and metal.Features & BenefitsSpray applicationRapid dryingGood adhesion to asphalt, concrete and metal

AC-EAGLE (TP-60T60)60% is thermoplastic acrylic resin for road marking and masonry paints.

Rovene 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. This polymer also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

Rovene 4180 is a low VOC styrene-butadiene emulsion polymer that provides the ability to compound at high solids and in multiple application areas. It is recommended for use in automobile underbody and protective coatings, landscaping mulch coatings, paper saturation, laminations, water resistance coatings, and specialty nonwoven/textile applications.

BarrierPro 4551 is a carboxylated styrene-butadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro 4551 is also a good base polymer for blending with other BarrierPro products to allow a membrane to be custom tailored to a specific strength and/or flexibility need.

Rovene® 6120 is an all acrylic polymer that offers a balance of properties within elastomeric roof coatings. Rovene 6120 can be formulated to meet or exceed ASTM 6083, Type 1. Rovene® 6120 exhibits adhesion to substrates, balance of stength and flexibility with excellent water resistance.

Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. Rovene 6121 also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

BarrierPro 4550 is a general purpose styrene-butadiene emulsion polymer of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro 4550 can be compounded with fillers and other additives to form coatings for a variety of applications such as water proofing membranes, specialty paints and sealants.

AC-EAGLE (TP-60X60)60% is thermoplastic acrylic resin for road marking and masonry paints.

Fushun Huaxing Petroleum Chemical HX-C9 100 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

Fushun Huaxing Petroleum Chemical HX-C9 110 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

HIGREE™ CL1102 is an aliphatic hydrocarbon resin specially designed as a binder for thermoplastic road marking formulations. It is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha.This grade of resin shows outstanding affinity with pigments and good flow-ablity and weatherability in thermoplastic road marking application.

SILIKAL® RU 727 resin is a low-viscosity, transparent, solvent-free 3-component methacrylic resin with enhanced substrate adhesion.

Fushun Huaxing Petroleum Chemical HX-C9 140 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

Norst® PB-500 is Particulate for thermoplastic applications. It is odorless and highly stable.

Fushun Huaxing Petroleum Chemical HX-C9 120 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

HIGREE™ CL1104 C5 hydrocarbon resin is a low molecular weight, narrow molecular distribution, light color thermoplastic resin produced from aliphatic petroleum-derived monomers .With good infinity with a wild range of polymers. Due to its good tack and cohesive ,it is a good tackifier for hot melt adhesives and pressure sensitive tapes.

Tirecycle™ MBS-800 is Particulate for thermoplastic applications. An upcycled, rejuvenated crumb rubber. It is impermeable to water or oxygen. It has good tensile strength, excellent aging/weather resistance, low stain, low electrical conductivity. It is odorless and highly stable.

MACRI CHEMICALS RESIMAC A6M is a 50% thermoplastic acrylic resin in Xylene. Which is used for Traffic divider paints, protective membranes for prefabricated concrete, façade paints, transparent fixatives for old surfaces and impregnating agents for concrete.

Norst® PB-800 is Particulate for thermoplastic applications. It is odorless and highly stable.

SILIKAL® RV 368 resin is a solvent-free, 2-component methacrylic resin of high impact resistance and low-temperature fl exibility whose highly-molecular structure makes it outstandingly suitable for self-leveling coatings subject to extreme stresses, predominantly outdoors or for cold stores. Coatings made from SILIKAL® RV 368 resin are durably elastic and able to crack bridging.

HIGREE™ CL100 hydrocarbon resin is a low molecular weight,light color thermoplastic resin produced from aliphatic petroleum-derived monomers .With good infinity with a wild range of fillers ,it is not only wildly used for tires but also road marking paint .Becaused of good tack and cohesive ,it is also a better choice for hot melt adhesive and pressure sensitive tape.

Norst® B-1620 is Particulate for thermoplastic applications. It is odorless and highly stable.